Date: Wed, 28 Jun 2000 06:34:51 +0100 (BST) From: Paul Branston <apbran@rannoch.demon.co.uk> To: Vegard Munthe <vegard@copyleft.no> Cc: freebsd-isdn@freebsd.org Subject: Re: Troubleshooting Message-ID: <Pine.LNX.4.21.0006280631130.1244-100000@rannoch.demon.co.uk> In-Reply-To: <Pine.LNX.4.10.10006271927010.31381-100000@unity.copyleft.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 27 Jun 2000, Vegard Munthe wrote: > > I'm setting up i4b on an OpenBSD 2.7, and have run into remarkably few > problems, until now. To this point I've compiled and installed i4b, > compiled and installed a new kernel supporting my Teles S0/16.3, compiled > and installed the freebsd userland ppp, and somewhat configured isdnd.conf > and ppp.conf. > > Everything seemed to go smoothly until I started it all up with high > debugging priorities and got a "No Carrier" error in ppp... > > Therefore I have two questions I hope someone can help me with; > > First I'm wondering if there is any way to 'talk' to the ISDN card > directly to see if the driver is at all comunicating with the card? This isdntrace will listen to the card and you can see constant traffic if the card is working at all. > > --- > DBG msg_dialoutnumber: dial req from rbch, unit 0 > DBG setup_dialout: entry userppp0 ok! > DBG find_by_device_for_dialoutnumber: found entry 0! > DBG FSM event [msg-dialout]: [idle => dialing] > DBG F_DIAL: local dial out request > DBG select_first_dialno: only one no, no = 22179080 > CHD 00003 userppp0 rate 360 sec/unit (rate) > CHD 00003 userppp0 dialing out from 22175582 to 22179080 > CHD 00003 userppp0 outgoing call disconnected (remote) > DBG msg_dialoutnumber: dial req from rbch, unit 0 > DBG find_by_device_for_dialoutnumber: entry 0, cdid in use > DBG msg_dialoutnumber: config entry reserved or no match > DBG msg_dialoutnumber: dial req from rbch, unit 0 > DBG find_by_device_for_dialoutnumber: entry 0, cdid in use > DBG msg_dialoutnumber: config entry reserved or no match > --- > > My ISDN line is fully functional as I have an ISDN telephone on a split > plug for testing, and I've tested the cables. My problem is finding where > the communication glitch is. My fear is that the kernel driver isn't > communicating with the card properly, but as the first question suggests, > I havn't found a way to test this yet. Any suggestions of getting this > fixed would help greatly. What to do now? :) > > Best regards, > > -- Vegard Munthe > Copyleft Software > Tel: 22232521 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isdn" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0006280631130.1244-100000>