Date: Sat, 23 Feb 2002 14:23:25 -0500 From: "Orville Pike (technews)" <technews@giallarhorn.org> To: freebsd-questions@freebsd.org Subject: Random crashes/reboots Message-ID: <20020223140508.C9AF.TECHNEWS@giallarhorn.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I am having a strange problem which reboots my 4.5 RELEASE machine. It
happens whenever i perform disk intensive activities such as building a
port. This happens with both generic and custom kernels the weird thing
is i can rebuild the kernel without a problem.
It's happened with 4.3/4.4 however not as often.
I am attaching a dmesg, any ideas
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Wed Jan 30 18:45:31 EST 2002
root@odin.giallarhorn.org:/usr/src/sys/compile/ODIN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (451.02-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 67043328 (65472K bytes)
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> en ed0
config> po ed0 0x300
config> ir ed0 11
config> iom ed0 0xd8000
config> f ed0 0
config> q
avail memory = 61177856 (59744K bytes)
Preloaded elf kernel "kernel" at 0xc0405000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc040509c.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdd50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 9102 graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xe400-0xe40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=1106 device=3040)> at device 7.3 on pci0
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xe800-0xe8ff mem 0xed000000-0xed0000ff irq 10 at device 8.0 on pci0
rl0: Ethernet address: 00:04:e2:04:f9:50
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller> port 0xec00-0xec1f at device 9.0 on pci0
pci_cfgintr_search: linked (2) to configured irq 10 at 0:8:0
pci_cfgintr: 0:9 INTA routed to irq 10
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
ed0 at port 0x300-0x31f iomem 0xd8000 irq 11 drq 0 on isa0
ed0: address 00:50:4d:00:a2:24, type NE2000 (16 bit)
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata0-master WDMA2
ad2: 12971MB <WDC WD136AA> [26354/16/63] at ata1-master UDMA33
acd0: CDROM <685A> at ata0-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
DEPENDENCY NOTE: portmap will be enabled to support NFS
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a:
1793 files, 21578 used, 79181 free
(29 frags, 9894 blocks, 0.0% fragmentation)
/dev/ad0s1f:
UNREF FILE
I=3 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=0 MTIME=Feb 18 17:14 2002 (CLEARED)
/dev/ad0s1f:
UNREF FILE
I=4 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=0 MTIME=Feb 18 17:14 2002 (CLEARED)
/dev/ad0s1f:
UNREF FILE
I=5 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=0 MTIME=Feb 18 17:14 2002 (CLEARED)
/dev/ad0s1f:
UNREF FILE
I=6 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=48 MTIME=Feb 20 03:01 2002 (CLEARED)
/dev/ad0s1f:
UNREF FILE
I=7 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=0 MTIME=Feb 20 03:01 2002 (CLEARED)
/dev/ad0s1f:
UNREF FILE
I=8 OWNER=root MODE=100600
/dev/ad0s1f: SIZE=0 MTIME=Feb 20 03:01 2002 (CLEARED)
/dev/ad0s1f:
FREE BLK COUNT(S) WRONG IN SUPERBLK
(SALVAGED)
/dev/ad0s1f:
SUMMARY INFORMATION BAD
(SALVAGED)
/dev/ad0s1f:
BLK(S) MISSING IN BIT MAPS
(SALVAGED)
/dev/ad0s1f:
2 files, 2 used, 314485 free
(21 frags, 39308 blocks, 0.0% fragmentation)
/dev/ad0s1e:
LINK COUNT FILE
I=16 OWNER=root MODE=100600
/dev/ad0s1e: SIZE=1289 MTIME=Jan 30 19:56 2002 COUNT 2 SHOULD BE 1 (ADJUSTED)
/dev/ad0s1e:
LINK COUNT FILE
I=125 OWNER=root MODE=100644
/dev/ad0s1e: SIZE=401 MTIME=Jan 30 19:56 2002 COUNT 2 SHOULD BE 1 (ADJUSTED)
/dev/ad0s1e:
UNREF FILE
I=12855 OWNER=root MODE=100640
/dev/ad0s1e: SIZE=0 MTIME=Feb 20 03:01 2002 (CLEARED)
/dev/ad0s1e:
FREE BLK COUNT(S) WRONG IN SUPERBLK
(SALVAGED)
/dev/ad0s1e:
SUMMARY INFORMATION BAD
(SALVAGED)
/dev/ad0s1e:
BLK(S) MISSING IN BIT MAPS
(SALVAGED)
/dev/ad0s1e:
295 files, 2667 used, 98092 free
(44 frags, 12256 blocks, 0.0% fragmentation)
/dev/ad2s1g:
7607 files, 3955288 used, 1798896 free
(1568 frags, 224666 blocks, 0.0% fragmentation)
/dev/ad2s1e:
131676 files, 1309538 used, 3772043 free
(5035 frags, 470876 blocks, 0.1% fragmentation)
/dev/ad2s1f:
133521 files, 587969 used, 444182 free
(34822 frags, 51170 blocks, 3.4% fragmentation)
Doing initial network setup:
hostname
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
IP-filter module loaded.
ipmon
ipfilter
ipnat
0 entries flushed from NAT table
0 entries flushed from NAT list
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020223140508.C9AF.TECHNEWS>