Date: Mon, 30 Oct 2000 21:48:21 +1300 From: roguetr@quicksilver.co.nz To: freebsd-questions@freebsd.org Subject: cbcp question Message-ID: <39FD35D5.5E92BC1E@quicksilver.co.nz>
next in thread | raw e-mail | index | archive | help
Howdy,
I have been asked by my boss to set up cbcp so that we can counter
balance incoming calls. This is necessary to counter-act the latest
interconnect agreement between some major telecommunication companies.
It's extremely easy to do with windows, but freebsd seems to be a little
harder (believe me, this isn't my usual opinion). I have searched the
mailing list archive, man -k callback and man -k cbcp, read the cbcp
sections of the ppp manpage and looked over the sample ppp config files.
The log shows I get this far:
Oct 30 08:20:20 sammy ppp[19725]: tun0: Phase: Pap Output: username
********
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: Pap Input: SUCCESS ()
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: Shutdown and
await peer callback
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink: LayerDown
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink:
SendTerminateReq(4) state = Opened
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink: State change
Opened --> Closing
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink:
RecvTerminateReq(2) state = Closing
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink:
SendTerminateAck(2) state = Closing
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink:
RecvTerminateAck(4) state = Closing
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink: LayerFinish
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink: State change
Closing --> Closed
Oct 30 08:20:21 sammy ppp[19725]: tun0: LCP: deflink: State change
Closed --> Initial
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: Disconnected!
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: lcp -> logout
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: logout -> hangup
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: Disconnected!
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: Connect time: 35
secs: 166 octets in, 291 octets out
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: : 10 packets in,
14 packets out
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: total 13 bytes/sec, peak
87 bytes/sec on Mon Oct 30 08:20:21 2000
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: hangup ->
opening
Oct 30 08:20:21 sammy ppp[19725]: tun0: Phase: deflink: Enter pause (60)
for redialing.
Oct 30 08:20:21 sammy ppp[19725]: tun0: Chat: deflink: Reconnect try 2
of 2
Oct 30 08:21:21 sammy ppp[19725]: tun0: Chat: deflink: Redial timer
expired.
As you can see, it just disconnects and wants to redial.
My ppp.conf is set as:
default:
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cuaa0
set log Phase CBCP Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0M0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
# set timeout 120 # 3 mintue idle timer (the
default)
add default HISADDR # Add a (sticky) default route
enable dns # request DNS info (for
resolv.conf)
papchap:
# enable chap
set reconnect 60 2
set redial 60
set callback auth cbcp
# e.164 mynumber
# set cbcp *
set phone 123456
set authname username
set authkey password
As you can se I've tried a few different options, I still don't know if
I'm heading in the right direction. A thread on the mailing list said
that it doesn't actually work.
If somebody could help me out and show me to the finish line, it would
be _greatly_ appreciated.
Cheers
Sarton O'Brien (could any answers please be cced to this address,
thanks)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39FD35D5.5E92BC1E>