Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 29 Feb 2004 00:54:33 +0300 (MSK)
From:      Dmitry Morozovsky <marck@rinet.ru>
To:        Julian Elischer <julian@elischer.org>
Cc:        hackers@freebsd.org
Subject:   Re: HEADSUP.. USB MFC coming..
Message-ID:  <20040229004436.F85955@woozle.rinet.ru>
In-Reply-To: <Pine.BSF.4.21.0402271745150.23658-100000@InterJet.elischer.org>
References:  <Pine.BSF.4.21.0402271745150.23658-100000@InterJet.elischer.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 27 Feb 2004, Julian Elischer wrote:

JE> I plan to commit the MFC at http://www.josef-k.net/freebsd/
JE> (the latest one) in the next couple of days. If you really care about
JE> USB in 4.10 you might do well to test this on your equipment,
JE> ESPECIALLY if you have unusual devices. Let me know of both successes
JE> and failures please.. If I hear nothing I won't know if it's because
JE> no-one tested it or it was just without problems..
JE>
JE> Please also check these same devices without the patch BEFORE you let me
JE> know of any failures so that we can tell if they are truely caused by
JE> the patch..

Well, my main headache (SONY Clie SJ20) is now in a bit different state; before
(at 4.9p1) it failed to attach with

ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
ucom0: init failed, STALLED
device_probe_and_attach: ucom0 attach returned 6
ugen0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2

now it is correctly identified (after HotSync activation)  as

ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2

Controller /dev/usb0:
addr 1: low speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: low speed, self powered, config 1, Palm Handheld(0x0066), Palm, Inc.(0x054c), rev 1.00

However, I still can't figure out how to sync, as dlpsh can't attach to
/dev/ucom before activatyng Sync, and never goes to the shell prompt when
statring in the middle of sync process. Googling does not help much,
unfortunately.

Two other USB devices I have are USB Generic storage (CF reader and MP3
player), and they seem to keep work smoothly.

I had I/O errors and hangups with cheap MemoryStick reader before,
but do not have it by hand to quick check. Hope to check tomorrow.

Thanks for your work!

Sincerely,
D.Marck                                     [DM5020, MCK-RIPE, DM3-RIPN]
------------------------------------------------------------------------
*** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru ***
------------------------------------------------------------------------



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040229004436.F85955>