From owner-freebsd-mobile@FreeBSD.ORG Tue Apr 20 03:39:34 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id D03EB16A4CE for ; Tue, 20 Apr 2004 03:39:34 -0700 (PDT) Received: from hexagon.stack.nl (hexagon.stack.nl [131.155.140.144]) by mx1.FreeBSD.org (Postfix) with ESMTP id E533243D2F for ; Tue, 20 Apr 2004 03:39:33 -0700 (PDT) (envelope-from marcov@stack.nl) Received: from toad.stack.nl (zen.stack.nl [IPv6:2001:610:1108:5010::130]) by hexagon.stack.nl (Postfix) with ESMTP id 4084FDE4#B81E551FC for ; Tue, 20 Apr 2004 12:39:32 +0200 (CEST) Received: by toad.stack.nl (Postfix, from userid 816) id 9551E83; Tue, 20 Apr 2004 12:39:32 +0200 (CEST) To: freebsd-mobile@freebsd.org Date: Tue, 20 Apr 2004 12:39:32 +0200 (CEST) X-Mailer: ELM [version 2.4ME+ PL88 (25)] MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII Message-Id: <20040420103932.9551E83@toad.stack.nl> From: marcov@stack.nl (Marco van de Voort) Subject: unsupported io range problem X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 20 Apr 2004 10:39:34 -0000 I've installed FreeBSD 5.2.1 on a Latitude Cpi. The Cpi has a C/dock dockingstation that works fine under 4.9. Contents: a 3c905 integrated, a 3c900 in the free PCI slot, and some adaptec SCSI controller. There is also a Latitude modular bay which is an IDE device. For all the docking station devices I get errors like: pcib1: device xl0 requested unsupported I/O range 0xfcc0-0xfcff (decoding 0x0-0xfff) The normal laptop devices seem to go ok. (the realtek is a 32-bits cardbus card, so in the laptop, not the docking) Some googling made me find the a hw.pci.unsupported...="1" key that I added to loader.conf, to no avail. Anybody any hints Dmesg: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (233.86-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff real memory = 134152192 (127 MB) avail memory = 120692736 (115 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fb940 pcib0: at pcibus 0 on motherboard pci0: on pcib0 pci_cfgintr: 0:2 INTA BIOS irq 11 pci_cfgintr: 0:3 INTA BIOS irq 11 pci_cfgintr: 0:3 INTB BIOS irq 11 pci_cfgintr: 0:7 INTD BIOS irq 11 pci0: at device 2.0 (no driver attached) cbb0: irq 11 at device 3.0 on pci0 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: irq 11 at device 3.1 on pci0 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x860-0x86f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: port 0xece0-0xecff irq 11 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piix0: port 0x840-0x84f at device 7.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 pcib1: at device 17.0 on pci0 pci1: on pcib1 pci_cfgintr: 0:17 INTB routed to irq 11 pcib1: slot 1 INTA is routed to irq 11 pci_cfgintr: 0:17 INTB routed to irq 11 pcib1: slot 5 INTA is routed to irq 11 pci_cfgintr: 0:17 INTD routed to irq 11 pcib1: slot 7 INTA is routed to irq 11 pci_cfgintr: 0:17 INTA routed to irq 11 pcib1: slot 8 INTA is routed to irq 11 xl0: <3Com 3c900-COMBO Etherlink XL> port 0xfcc0-0xfcff irq 11 at device 1.0 on pci1 end (fcff) > sc->iolimit (fff) pcib1: device xl0 requested unsupported I/O range 0xfcc0-0xfcff (decoding 0x0-0xfff) xl0: couldn't map ports/memory device_probe_and_attach: xl0 attach returned 6 atapci1: port 0xfc80-0xfc8f,0xfc98-0xfc9b,0xfca0-0xfca7,0xfcb0-0xfcb3,0xfcb8-0xfcbf irq 11 at device 5.0 on pci1 end (fc8f) > sc->iolimit (fff) pcib1: device atapci1 requested unsupported I/O range 0xfc80-0xfc8f (decoding 0x0-0xfff) atapci1: [MPSAFE] atapci1: HW has secondary channel disabled end (fcbf) > sc->iolimit (fff) pcib1: device atapci1 requested unsupported I/O range 0xfcb8-0xfcbf (decoding 0x0-0xfff) ahc0: port 0xf800-0xf8ff mem 0xfdfff000-0xfdffffff irq 11 at device 7.0 on pci1 end (f8ff) > sc->iolimit (fff) pcib1: device ahc0 requested unsupported I/O range 0xf800-0xf8ff (decoding 0x0-0xfff) ahc0: can't allocate register resources device_probe_and_attach: ahc0 attach returned 12 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xfc40-0xfc7f irq 11 at device 8.0 on pci1 end (fc7f) > sc->iolimit (fff) pcib1: device xl0 requested unsupported I/O range 0xfc40-0xfc7f (decoding 0x0-0xfff) xl0: couldn't map ports/memory device_probe_and_attach: xl0 attach returned 6 orm0: