From owner-freebsd-mobile Sun Aug 20 21: 8:12 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f115.law9.hotmail.com [64.4.9.115]) by hub.freebsd.org (Postfix) with ESMTP id 135A337B422 for ; Sun, 20 Aug 2000 21:07:58 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 20 Aug 2000 21:07:57 -0700 Received: from 63.195.114.87 by lw9fd.law9.hotmail.msn.com with HTTP; Mon, 21 Aug 2000 GMT X-Originating-IP: [63.195.114.87] From: "Greg Smith" To: freebsd-mobile@freebsd.org Subject: Winbook FX w/ Cirrus 5729/5730 PCIC + FreeBSD 4.1R = SOL ? Date: Mon, 21 Aug 2000 04:07:57 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 21 Aug 2000 04:07:57.0970 (UTC) FILETIME=[63A30F20:01C00B25] Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, I recently installed FreeBSD 4.1-Release on a Winbook FX (P133, 32MB, 2GB). The machine now can dual-boot win95 or FreeBSD. The installation went fine, but I get the following errors: pccardd: "fatal error: no PC-CARD slots" pccardc: "/dev/card0: Device not configured" I have tried various changes to various files that I have gleaned from searching the last few years of this mailing list, but to no avail: I swapped the device card and device pcic statements; I tried the option PNPBIOS statement; I moved the sound card from IRQ10 to IRQ5 in BIOS; I altered the BIOS to support PNP or non-PNP OS; I adjusted the generally available IRQ and IO in pccard.conf, etc. I'm not sure what else to do, or if this setup will even work with 4.1R. I saved copies of the various files that should show the problem, for many of the permutations, and merged them together with highlighting of what varied across experiments. The lines which varied are all bracketed with lines starting with ===. I would appreciate any hints or advice. And please let me know if this is doomed, because I might be able to get a Winbook XL which has a TI PCI-1131 CardBus Controller instead. Or in the worst case a Winbook XP5 with the Vadem 469 chip and ISA bus I believe. Thanks in advance for considering this. Greg Smith --- config ---- machine i386 cpu I586_CPU ident MINE maxusers 02 === the following 1 line is present with PNPBIOS in config options PNPBIOS === end diff === the following 1 line is present without PNPBIOS in config #!options PNPBIOS === end diff : lines removed : device isa #!device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 options PSM_HOOKRESUME #hook the system resume event, useful #for some laptops options PSM_RESETAFTERSUSPEND #reset the device at the resume event device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)" options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)" options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" options SC_TWOBUTTON_MOUSE # paste text with right mouse button # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? options PCIC_RESUME_RESET # reset cards after resume # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # PCMCIA Ethernet Adaptors device ed # NE2000 compatible, e.g. LinkSys EC2T device ep # 3Com 3C589x # Sound #!device pcm options INCLUDE_CONFIG_FILE # Include this file in kernel options IPFIREWALL #firewall using ipfw options IPFIREWALL_VERBOSE #print information about # dropped packets options IPFIREWALL_FORWARD #enable transparent proxy support options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity #!options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPV6FIREWALL #firewall for IPv6 options IPV6FIREWALL_VERBOSE options IPV6FIREWALL_VERBOSE_LIMIT=100 #!options IPV6FIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT #divert sockets using ipfw options IPFILTER #ipfilter support options IPFILTER_LOG #ipfilter logging options IPSTEALTH #support for stealth forwarding #!options TCPDEBUG options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN options TCP_RESTRICT_RST #restrict emission of TCP RST options ICMP_BANDLIM #icmp error response bandwidth limiting #!options DUMMYNET #enable "dummynet" bandwidth limiter #!options BRIDGE #enable bridging between ethernet cards --- rc.conf --- # This file now contains just the overrides from /etc/defaults/rc.conf # please make all changes to this file. # -- sysinstall generated deltas -- # linux_enable="YES" moused_enable="YES" gateway_enable="YES" ############ my changes ############ swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="YES" # Set to YES to enable APM BIOS functions (or NO). pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_beep="1" # pccard beep type. pccard_enable="YES" # Set to YES if you want to configure PCCARD devices. pccard_conf="/etc/pccard.conf" # pccardd(8) config file hostname="00.000.000.00" # Set this! firewall_enable="NO" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface or IPaddress to use. log_in_vain="YES" # YES to log connects to ports w/o listeners. tcp_drop_synfin="YES" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification tcp_restrict_rst="YES" # Set to YES to restrict emission of RST icmp_drop_redirect="YES" # Set to YES to ignore ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). ifconfig_lo0="inet 127.0.0.5" # default loopback device configuration. ifconfig_ed0_alias0="inet 00.000.000.00 netmask 0xffffffff" # ifconfig_ep0_alias0="inet 00.000.000.00 netmask 0xffffffff" # portmap_enable="NO" # Run the portmapper service (or NO). defaultrouter="00.000.000.000" # Set to default gateway (or NO). sendmail_enable="NO" # Run the sendmail daemon (or NO). --- pccard.conf --- # $FreeBSD: src/etc/defaults/pccard.conf,v 1.98.2.3 2000/07/19 12:58:12 sanpei Exp $ # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 5 9 11 # Available memory slots memory 0xd4000 96k ########## ata ########## # Integral Peripherals Viper HDD Series card "INTEGRAL PERIPHERALS" "ATA CARD" # config default "ata" ? config 0x01 "ata" ? iosize 16 ########## ed ########## # Kingston KNE-PC2 card "Kingston" "KNE-PC2" config default "ed" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete # Linksys Combo PCMCIA EthernetCard (model EC2T on box) card "Linksys" "Combo PCMCIA EthernetCard (EC2T)" config 0x1 "ed" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete ########## ep ########## # 3Com Etherlink III 3CXE589ET card "3Com" "Megahertz 589E" config 0x1 "ep" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "ep" ? # config auto "ep" ? insert /etc/pccard_ether $device -link0 link1 # insert /etc/pccard_ether $device link0 -link1 remove /sbin/ifconfig $device delete # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep" ? # config auto "ep" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device delete # ------------------------------------------------------------------- # # "Wildcard" entries # # ------------------------------------------------------------------- # GENERIC PCMCIA modem generic serial config auto "sio" ? reset 10000 # for unstable cards logstr "GENERIC PCMCIA modem" # GENERIC Flash ATA / ATA HDD generic fixed_disk config auto "ata" ? logstr "GENERIC Flash ATA / ATA HDD" --- dmesg ----- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Fri Aug 18 13:52:13 PDT 2000 root@00.000.000.00:/usr/src/sys/compile/MINEPNP Calibrating clock(s) ... TSC clock: 166056903 Hz, i8254 clock: 1192939 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P55C (166.09-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x544 Stepping = 4 Features=0x8001bf real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) === next 2 with BIOS setting sound to IRQ10 [non-PnP mode, no PNPBIOS] 0x002ea000 - 0x01ff7fff, 30466048 bytes (7438 pages) avail memory = 30003200 (29300K bytes) === end diff === next 2 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] 0x002eb000 - 0x01ff7fff, 30461952 bytes (7437 pages) avail memory = 29999104 (29296K bytes) === end diff bios32: Found BIOS32 Service Directory header at 0xc00fdb50 bios32: Entry = 0xf61a2 (c00f61a2) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x2ae pnpbios: Found PnP BIOS data at 0xc00fdb60 pnpbios: Entry = f0000:5086 Rev = 1.0 pnpbios: Event flag at fd878 Other BIOS signatures found: ACPI: 00000000 === next 1 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] Preloaded elf kernel "kernel" at 0xc02d2000. === end diff Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x800008d4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12358086) npx0: on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 173792144 bytes/sec bzero() bandwidth = 653594771 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12358086) pcib0: on motherboard found-> vendor=0x8086, dev=0x1235, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x1234, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x100b, dev=0x0002, revid=0x01 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=14 map[10]: type 1, range 32, base 000001f0, size 3 map[14]: type 1, range 32, base 000003f4, size 2 map[18]: type 1, range 32, base 00000170, size 3 map[1c]: type 1, range 32, base 00000374, size 2 map[20]: type 1, range 32, base 0000fff0, size 4 found-> vendor=0x1013, dev=0x1100, revid=0xee class=06-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 === next 1 with BIOS setting sound to IRQ10 [non-PnP mode, no PNPBIOS] intpin=a, irq=255 === end diff === next 1 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] intpin=a, irq=10 === end diff === next 1 with BIOS in non-PnP mode map[10]: type 3, range 32, base 0000fcec, size 2 === end diff found-> vendor=0x102c, dev=0x00e0, revid=0xc6 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base fd000000, size 24 pci0: on pcib0 chip1: at device 1.0 on pci0 atapci0: port 0xfff0-0xffff,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at device 5.0 on pci0 atapci0: Busmastering DMA not enabled ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0001 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed === next 1 with BIOS in PnP mode pcic-pci0: at device 19.0 on pci0 === end diff === next 1 with BIOS in non-PnP mode pcic-pci0: port 0xfcec-0xfcef at device 19.0 on pci0 === end diff === next 1 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] pcic-pci0: port 0xfcec-0xfcef irq 10 at device 19.0 on pci0 === end diff pcic-pci0: Legacy address set to 0 PCI Config space: 00: 11001013 04000083 060500ee 00000000 10: 0000fced 00000000 00000000 00000000 20: 00000000 00000000 00000000 00000000 === next 1 with BIOS setting sound to IRQ10 [all] 30: 00000000 00000000 00000000 000001ff === end diff === next 1 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] 30: 00000000 00000000 00000000 0000010a === end diff 40: 00000000 00000000 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00000000 00000000 00000000 00000000 90: 00000000 00000000 00000000 00000000 Cardbus Socket registers: === next 2 with BIOS setting sound to IRQ10 [all] 00: 00000000: 00000000: 00000000: 00000000: 10: 00000000: 00000000: 00000000: 00000000: === end diff === next 2 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] 00: 000000e5: 01cb4968: 256de800: c4830001: 10: 087d8310: 831a7500: ca68fcc4: 680001cb: === end diff ExCa registers: === next 4 with PNPBIOS in config 00: 65 74 5f 6c 75 6e 00 64 65 66 72 74 72 6c 69 73 10: 74 5f 64 65 6c 00 76 6d 5f 6d 61 70 5f 73 74 61 20: 72 74 75 70 00 76 6f 70 5f 73 74 72 61 74 65 67 30: 79 5f 64 65 73 63 00 76 6f 70 5f 69 73 6c 6f 63 === end diff === next 4 without PNPBIOS in config 00: 65 74 69 5f 69 72 65 74 5f 66 61 75 6c 74 00 6f 10: 73 69 67 72 65 74 75 72 6e 00 61 6c 6c 6f 63 62 20: 75 66 00 73 6f 63 61 6e 74 73 65 6e 64 6d 6f 72 30: 65 00 76 6f 70 5f 72 65 76 6f 6b 65 5f 64 65 73 === end diff === next 4 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] 00: 52 50 8b 55 08 52 e8 54 01 00 00 89 c6 8b 45 08 10: 8b 38 89 78 04 83 c4 f8 8b 45 0c 8b 55 10 52 50 20: e8 e6 05 00 00 66 89 47 04 8b 55 14 89 57 0c 88 30: d8 0c 04 88 47 06 8a 55 0c 88 57 07 89 77 08 8d === end diff pci0: (vendor=0x102c, dev=0x00e0) at 20.0 isa0: on motherboard === next 93 with PNPBIOS in config pnpbios: 19 devices, largest 131 bytes ESS1878: adding dma mask 0x2 ESS1878: adding dma mask 0x8 ESS1878: adding irq mask 0x400 ESS1878: adding io range 0x220-0x22f, size=0x10, align=0x10 ESS1878: adding io range 0x388-0x38b, size=0x4, align=0x8 ESS1878: adding io range 0x330-0x331, size=0x2, align=0x10 ESS1878: end config pnpbios: handle 0 device ID ESS1878 (78187316) ESS0005: adding io range 0x201-0x201, size=0x1, align=0 ESS0005: end config pnpbios: handle 1 device ID ESS0005 (05007316) ESS0004: adding io range 0x800-0x807, size=0x8, align=0x10 ESS0004: end config pnpbios: handle 2 device ID ESS0004 (04007316) PNP0a03: adding io range 0xcf8-0xcfb, size=0x4, align=0 PNP0a03: adding io range 0xcfc-0xcff, size=0x4, align=0 PNP0a03: end config pnpbios: handle 3 device ID PNP0a03 (030ad041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 PNP0800: end config pnpbios: handle 4 device ID PNP0800 (0008d041) PNP0c01: adding memory range 0-0x9ffff, size=0xa0000, align=0 PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0 PNP0c01: adding fixed memory32 range 0x100000-0x50fffff, size=0x5000000 PNP0c01: end config pnpbios: handle 5 device ID PNP0c01 (010cd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1 PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 PNP0c02: adding io range 0x373-0x373, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c02: adding fixed memory32 range 0xcb000-0xcbfff, size=0x1000 PNP0c02: adding fixed memory32 range 0xd0000-0xd07ff, size=0x800 PNP0c02: end config pnpbios: handle 6 device ID PNP0c02 (020cd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: adding irq mask 00x2 PNP0303: end config pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 9 device ID PNP0f13 (130fd041) PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 11 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: adding irq mask 00x4 PNP0000: end config pnpbios: handle 12 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: adding irq mask 00x1 PNP0100: end config pnpbios: handle 13 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: adding irq mask 0x100 PNP0b00: end config pnpbios: handle 14 device ID PNP0b00 (000bd041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 15 device ID PNP0501 (0105d041) PUM0000: adding io range 0x3e8-0x3ef, size=0x8, align=0 PUM0000: adding irq mask 0x10 PUM0000: adding dma mask 0x1 PUM0000: end config pnpbios: handle 16 device ID PUM0000 (0000ad42) QCI0100: adding io range 0x2f8-0x2ff, size=0x8, align=0 QCI0100: adding irq mask 00x8 QCI0100: end config pnpbios: handle 17 device ID QCI0100 (00016944) PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 PNP0400: adding io range 0x778-0x77a, size=0x3, align=0 PNP0400: adding irq mask 0x80 PNP0400: end config pnpbios: handle 18 device ID PNP0400 (0004d041) PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0 PNP0700: adding irq mask 0x40 PNP0700: end config pnpbios: handle 19 device ID PNP0700 (0007d041) === end diff Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=ff status1=ff ata3: probe allocation failed atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0045 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00006000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 01 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 00 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 01 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 00 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus0 lpt0: Interrupt-driven port isa_probe_children: probing PnP devices === next 19 with PNPBIOS in config unknown0: at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 10 drq 1,3 on isa0 unknown1: at port 0x201 on isa0 unknown2: at port 0x800-0x807 on isa0 unknown3: at port 0xcf8-0xcfb,0xcfc-0xcff on isa0 unknown4: at port 0x61 on isa0 unknown5: at iomem 0-0x9ffff,0xe0000-0xfffff, 0x100000-0x50fffff on isa0 unknown6: at port 0x80,0x4d0-0x4d1,0xb2-0xb3,0x74-0x75, 0x398-0x399,0x373 iomem 0xfffe0000-0xffffffff, 0xcb000-0xcbfff,0xd0000-0xd07ff on isa0 unknown: can't assign resources unknown7: at port 0xf0-0xff irq 13 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown8: at port 0x40-0x43 irq 0 on isa0 unknown9: at port 0x70-0x71 irq 8 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources === end diff BIOS Geometries: 0:02097f3f 0..521=522 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, logging limited to 100 packets/entry IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled ad0: ATA-3 disk at ata0 as master ad0: 2061MB (4221504 sectors), 4188 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, BIOSPIO ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Creating DISK ad0 Creating DISK wd0 === next 1 with BIOS setting sound to IRQ10 [all] Mounting root from ufs:ad0s2a === end diff === next 1 with BIOS setting sound to IRQ5 [non-PnP mode, no PNPBIOS] Mounting root from ufs:/dev/ad0s2a === end diff ad0s1: type 0xb, start 63, end = 2048255, size 2048193 : OK ad0s2: type 0xa5, start 2048256, end = 4096511, size 2048256 : OK ad0s4: type 0xa0, start 4096512, end = 4209407, size 112896 : OK start_init: trying /sbin/init Linux-ELF exec handler installed --- win95 view --- ******************** IRQ SUMMARY ******************** 00 - System timer 01 - Standard 101/102-Key or Microsoft Natural Keyboard 02 - Programmable interrupt controller 03 - WinBook FX V.34i+ 04 - Generic Ir Serial Port (COM3) 04 - Communications Port (COM1) === next 1 with BIOS setting sound to IRQ5 [non-PnP or PnP mode] 05 - ES1878 Plug and Play AudioDrive === end diff 06 - Standard Floppy Disk Controller 07 - Printer Port (LPT1) 08 - System CMOS/real time clock === next 1 with BIOS setting sound to IRQ5 [non-PnP or PnP mode] 10 - IRQ Holder for PCI Steering === end diff === next 1 with BIOS setting sound to IRQ10 [non-PnP or PnP mode] 10 - ES1878 Plug and Play AudioDrive === end diff 11 - 3Com EtherLink III PCMCIA (3C589D) 12 - PS/2 Compatible Mouse Port 13 - Numeric data processor 14 - Intel 82371FB PCI Bus Master IDE Controller 14 - Primary IDE controller (single fifo) 15 - Intel 82371FB PCI Bus Master IDE Controller 15 - Secondary IDE controller (single fifo) ******************** IO PORT SUMMARY ******************** 0000h-000Fh - Direct memory access controller 0020h-0021h - Programmable interrupt controller 0040h-0043h - System timer 0060h-0060h - Standard 101/102-Key or Microsoft Natural Keyboard 0061h-0061h - System speaker 0064h-0064h - Standard 101/102-Key or Microsoft Natural Keyboard 0070h-0071h - System CMOS/real time clock 0074h-0075h - Motherboard resources 0080h-0080h - Motherboard resources 0081h-008Fh - Direct memory access controller 00A0h-00A1h - Programmable interrupt controller 00B2h-00B3h - Motherboard resources 00C0h-00DFh - Direct memory access controller 00F0h-00FFh - Numeric data processor === next 1 with BIOS in PnP mode 0104h-0107h - Cirrus Logic PCIC compatible PCI to PCMCIA bridge === end diff 0110h-011Fh - 3Com EtherLink III PCMCIA (3C589D) 0170h-0177h - Intel 82371FB PCI Bus Master IDE Controller 0170h-0177h - Secondary IDE controller (single fifo) 01F0h-01F7h - Intel 82371FB PCI Bus Master IDE Controller 01F0h-01F7h - Primary IDE controller (single fifo) 0201h-0201h - Gameport Joystick 0220h-022Fh - ES1878 Plug and Play AudioDrive 02F8h-02FFh - WinBook FX V.34i+ 0330h-0331h - ES1878 Plug and Play AudioDrive 0373h-0373h - Motherboard resources 0376h-0376h - Intel 82371FB PCI Bus Master IDE Controller 0376h-0376h - Secondary IDE controller (single fifo) 0378h-037Fh - Printer Port (LPT1) 0388h-038Bh - ES1878 Plug and Play AudioDrive 0398h-0399h - Motherboard resources 03B0h-03BBh - Chips & Technologies 65550 PCI 03C0h-03DFh - Chips & Technologies 65550 PCI 03E8h-03EFh - Generic Ir Serial Port (COM3) 03F0h-03F5h - Standard Floppy Disk Controller 03F6h-03F6h - Intel 82371FB PCI Bus Master IDE Controller 03F6h-03F6h - Primary IDE controller (single fifo) 03F7h-03F7h - Standard Floppy Disk Controller 03F8h-03FFh - Communications Port (COM1) 04D0h-04D1h - Motherboard resources 0778h-077Ah - Printer Port (LPT1) 0800h-0807h - ES1878 Control Interface 0CF8h-0CFBh - PCI bus 0CFCh-0CFFh - PCI bus === next 1 with BIOS in non-PnP mode FCECh-FCEFh - Cirrus Logic PCIC compatible PCI to PCMCIA bridge === end diff FFF0h-FFF7h - Intel 82371FB PCI Bus Master IDE Controller FFF0h-FFF7h - Primary IDE controller (single fifo) FFF8h-FFFFh - Intel 82371FB PCI Bus Master IDE Controller FFF8h-FFFFh - Secondary IDE controller (single fifo) ******************** UPPER MEMORY USAGE SUMMARY ******************** 00000000h-0009FFFFh - System board extension for PnP BIOS 000A0000h-000AFFFFh - Chips & Technologies 65550 PCI 000B0000h-000BFFFFh - Chips & Technologies 65550 PCI 000C0000h-000CAFFFh - Chips & Technologies 65550 PCI 000CB000h-000CBFFFh - Motherboard resources 000D0000h-000D07FFh - Motherboard resources 000E0000h-000FFFFFh - System board extension for PnP BIOS 00100000h-050FFFFFh - System board extension for PnP BIOS 05100000h-05100FFFh - PCMCIA Card Services FD000000h-FDFFFFFFh - Chips & Technologies 65550 PCI FFFE0000h-FFFFFFFFh - Motherboard resources ******************** DMA USAGE SUMMARY ******************** 00 - Generic Ir Serial Port (COM3) 01 - ES1878 Plug and Play AudioDrive 02 - Standard Floppy Disk Controller 03 - ES1878 Plug and Play AudioDrive 04 - Direct memory access controller ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message