From owner-freebsd-questions Fri Apr 14 05:33:17 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id FAA15776 for questions-outgoing; Fri, 14 Apr 1995 05:33:17 -0700 Received: from crow.csrv.uidaho.edu (root@crow.csrv.uidaho.edu [129.101.119.223]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id FAA15770 for ; Fri, 14 Apr 1995 05:33:14 -0700 Received: from pain.csrv.uidaho.edu (pain.csrv.uidaho.edu [129.101.114.109]) by crow.csrv.uidaho.edu (8.6.9/8.6.9) with ESMTP id FAA27406 for ; Fri, 14 Apr 1995 05:33:12 -0700 Message-Id: <199504141233.FAA27406@crow.csrv.uidaho.edu> To: questions@freefall.cdrom.com Subject: [2.0R] pas16 query X-Real-Name: Faried Nawaz X-Address: Box 3582, Moscow, Id 83843-1914 X-Phone: 1 (208) 882 8896 Date: Fri, 14 Apr 1995 05:33:11 -0700 From: Faried Nawaz Sender: questions-owner@FreeBSD.org Precedence: bulk hello, a friend was low on rent money, so i his pas16 card. i have a 486dx33 with 8mb ram (the usual...), and the pas16 is set to irq10 drq5. as far as i know, there are no conflicts. i can't get it to work. i (of course :) suspect the way i compiled my kernel to handle it. currently, /dev/sndstat says Sound Driver:2.90-2 (Thu Sep 29 15:33:39 PDT 1994 swallace@pal-r32-a07b.slip.nts.uci.edu.) Config options: ffffffff Installed drivers: Type 1: OPL-2/OPL-3 FM Type 3: ProAudioSpectrum Type 5: Roland MPU-401 Type 2: SoundBlaster Type 6: SoundBlaster16 Type 7: SB16 MIDI Type 9: Ultrasound 16-bit opt. Type 10: MS Sound System Type 4: Gravis Ultrasound Card config: Roland MPU-401 at 0x330 irq 6 drq 0 MS Sound System at 0x530 irq 10 drq 3 ProAudioSpectrum at 0x388 irq 10 drq 5 SoundBlaster at 0x220 irq 7 drq 1 SoundBlaster16 at 0x220 irq 7 drq 6 SB16 MIDI at 0x300 irq 7 drq 0 Ultrasound 16-bit opt. at 0x530 irq 7 drq 3 Gravis Ultrasound at 0x220 irq 15 drq 6 OPL-2/OPL-3 FM at 0x38a irq 65535 drq 4294967295 PCM devices: 0: Pro Audio Spectrum 1: SoundBlaster 2.0 Synth devices: 0: Yamaha OPL-3 Midi devices: MIDI Timers: 0: System Timer 1 mixer(s) installed (yet cat foo.au > /dev/audio doesn't produce a sound.) i believe the card is not set to emulate sound blaster or the mpu_401. i configured and reconfigured my kernel so many times in the past two days... :( could anyone please send me whatever lines the kernel needs to recog & use the card? i'm lost... :( thanks, faried.