Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Sep 2005 15:14:08 +0900 (JST)
From:      FUJITA Kazutoshi <fujita@soum.co.jp>
To:        freebsd-amd64@freebsd.org, freebsd-current@freebsd.org
Cc:        freebsd-usb@freebsd.org
Subject:   MAXMEM ?
Message-ID:  <20050917.151408.46626816.fujita@soum.co.jp>
In-Reply-To: <20050902.103259.08238152.fujita@soum.co.jp> <20050902.105311.24457489.fujita@soum.co.jp>
References:  <17166.21317.705489.47055@grasshopper.cs.duke.edu> <20050902.100210.123568240.fujita@soum.co.jp> <20050902.103259.08238152.fujita@soum.co.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
----Next_Part(Sat_Sep_17_15_14_08_2005_164)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Hi,

I have AMD64 -CURRENT box.
Motherboard is ASUS A8N-E(chipset is nForce4).
It has 4GB Memory.

There is some trouble with GENERIC kernel,
but specifying MAXMEM, such as

options	       MAXMEM=(2*1024*1024)

in kernel configuration solve that.

What is the problem?


[trouble 1]
From: FUJITA Kazutoshi <fujita@soum.co.jp>
Subject: bge problem
Date: Fri, 02 Sep 2005 10:32:59 +0900 (JST)

> > nve never works on my amd64 box.
> > It links up successfully, but...
> > 
> > nve0: device timeout (5)
> > nve0: link state changed to DOWN
> > nve0: link state changed to UP
> > nve0: device timeout (8)
> > nve0: link state changed to DOWN
> > nve0: link state changed to UP
> > 
> > 
> > my motherboard is ASUS A8N-E.
> 
> on my amd64 box, bge (at PCI slot) also never works.
> it seems same problem as nve.
> 
> 
> bge0: link state changed to UP
> bge0: watchdog timeout -- resetting
> bge0: link state changed to DOWN
> bge0: link state changed to UP
> bge0: watchdog timeout -- resetting
> bge0: link state changed to DOWN
> bge0: link state changed to UP
> bge0: watchdog timeout -- resetting
> bge0: link state changed to DOWN
> 
> 
> bge0: <Altima AC9100 Gigabit Ethernet, ASIC rev. 0x105> mem 0xd8000000-0xd800ffff irq 16 at device 6.0 on pci5
> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd8000000
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bge0: bpf attached
> bge0: Ethernet address: 00:09:5b:8e:63:2f
> bge0: [MPSAFE]
> 
> 
> of course, the bge works well on my i386 box.
> any suggestions ?


[trouble 2]
From: FUJITA Kazutoshi <fujita@soum.co.jp>
Subject: uhub1: device problem (SHORT_XFER), disabling port 1
Date: Fri, 02 Sep 2005 10:53:11 +0900 (JST)

> my axe never works on my amd64 box with 7.0-current.
> 
> insert axe to the usb port, following message is out.
> 
> uhub1: device problem (SHORT_XFER), disabling port 1
> 
> 
> of course,
> the axe works well on my i386 laptop(ThinkPad T43)
> with 7.0-current.


Regards,

----Next_Part(Sat_Sep_17_15_14_08_2005_164)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="dmesg.txt"

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #15: Sat Sep 17 14:16:11 JST 2005
    fujita@oscar:/usr/obj/usr/src/sys/OSCAR
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a62000.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80a621d0.
Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff80a627f8.
Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff80a62d60.
Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff80a631c8.
Preloaded elf obj module "/boot/kernel/ichsmb.ko" at 0xffffffff80a63630.
ACPI APIC Table: <Nvidia AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193257 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2412374352 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2412.37-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f32  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
  Hyperthreading: 2 logical CPUs
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 5368709120 (5120 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b61000 - 0x00000000b69bffff, 3051745280 bytes (745055 pages)
0x0000000100000000 - 0x000000013ffebfff, 1073659904 bytes (262124 pages)
avail memory = 4115156992 (3924 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
MADT: Interrupt override: source 14, irq 14
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
MADT: Interrupt override: source 15, irq 15
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
null: <null device, zero device>
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80004004
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNK2> irq 3 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: <ACPI PCI Link LUBA> on acpi0
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: <ACPI PCI Link LMAC> irq 3 on acpi0
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: <ACPI PCI Link LACI> irq 5 on acpi0
pci_link8: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: <ACPI PCI Link LMCI> on acpi0
pci_link9: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: <ACPI PCI Link LSMB> on acpi0
pci_link10: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: <ACPI PCI Link LUB2> on acpi0
pci_link11: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link12: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: <ACPI PCI Link LSID> irq 5 on acpi0
pci_link13: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link14: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link15: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link16: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link16: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link16: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link17: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link17: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link17: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link18: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link18: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link18: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link19: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link19: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link19: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link20: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   16   N     0  16
pci_link20: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   16   N     0  16
pci_link20: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link21: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link21: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link21: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link22: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link23: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link24: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link25: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link26: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link27: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link28: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link29: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link30: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
pci_link31: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x10de, dev=0x005e, revid=0xa3
	bus=0, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0050, revid=0xa3
	bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0052, revid=0xa2
	bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  5, enabled
	map[20]: type 4, range 32, base 00004c00, size  6, enabled
	map[24]: type 4, range 32, base 00004c40, size  6, enabled
found->	vendor=0x10de, dev=0x005a, revid=0xa2
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d8104000, size 12, enabled
found->	vendor=0x10de, dev=0x005b, revid=0xa3
	bus=0, slot=2, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base feb00000, size  8, enabled
found->	vendor=0x10de, dev=0x0059, revid=0xa2
	bus=0, slot=4, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
	map[14]: type 4, range 32, base 0000e000, size  8, enabled
	map[18]: type 1, range 32, base d8103000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCJ:0)
pci_link24: Picked IRQ 20 with weight 0
pcib0: slot 4 INTA routed to irq 20 via \\_SB_.PCI0.APCJ
found->	vendor=0x10de, dev=0x0053, revid=0xf2
	bus=0, slot=6, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x10de, dev=0x0054, revid=0xf3
	bus=0, slot=7, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 000009f0, size  3, enabled
	map[14]: type 4, range 32, base 00000bf0, size  2, enabled
	map[18]: type 4, range 32, base 00000970, size  3, enabled
	map[1c]: type 4, range 32, base 00000b70, size  2, enabled
	map[20]: type 4, range 32, base 0000d800, size  4, enabled
	map[24]: type 1, range 32, base d8102000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.APSI:0)
pci_link29: Picked IRQ 21 with weight 0
pcib0: slot 7 INTA routed to irq 21 via \\_SB_.PCI0.APSI
found->	vendor=0x10de, dev=0x0055, revid=0xf3
	bus=0, slot=8, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 000009e0, size  3, enabled
	map[14]: type 4, range 32, base 00000be0, size  2, enabled
	map[18]: type 4, range 32, base 00000960, size  3, enabled
	map[1c]: type 4, range 32, base 00000b60, size  2, enabled
	map[20]: type 4, range 32, base 0000c400, size  4, enabled
	map[24]: type 1, range 32, base d8101000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.APSJ:0)
pci_link30: Picked IRQ 22 with weight 0
pcib0: slot 8 INTA routed to irq 22 via \\_SB_.PCI0.APSJ
found->	vendor=0x10de, dev=0x005c, revid=0xa2
	bus=0, slot=9, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x0057, revid=0xa3
	bus=0, slot=10, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d8100000, size 12, enabled
	map[14]: type 4, range 32, base 0000b000, size  3, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 23 with weight 0
pcib0: slot 10 INTA routed to irq 23 via \\_SB_.PCI0.APCH
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=12, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=13, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=14, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ichsmb0: <SMBus controller> port 0xe400-0xe41f,0x4c00-0x4c3f,0x4c40-0x4c7f at device 1.1 on pci0
ichsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x4c00
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS:0)
pci_link26: Picked IRQ 20 with weight 1
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.PCI0.APCS
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
ohci0: <OHCI (generic) USB controller> mem 0xd8104000-0xd8104fff at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8104000
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 21 with weight 1
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.PCI0.APCF
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb00000
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCL:0)
pci_link27: Picked IRQ 22 with weight 1
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.PCI0.APCL
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem 0xd8103000-0xd8103fff irq 20 at device 4.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
pcm0: Reserved 0x100 bytes for rid 0x14 type 4 at 0xe000
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec (id = 0x414c4790)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap b69aa000, 4000; 0xffffffffb4abf000 -> b69aa000
pcm0: sndbuf_setmap b69a6000, 4000; 0xffffffffb4ac3000 -> b69a6000
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd8102000-0xd8102fff irq 21 at device 7.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xd8102000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xd8101000-0xd8101fff irq 22 at device 8.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci2: [MPSAFE]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xd8101000
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata4: SATA connect ready time=0ms
ata4: sata_connect devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1:   secondary bus     5
pcib1:   subordinate bus   5
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xd8000000-0xd80fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
ACPI: Found matching pin for 0.7.INTA at func 0: 21
pci_link17: BIOS IRQ 21 for 0.7.INTA is invalid
ACPI: Found matching pin for 0.8.INTA at func 0: 22
pci_link18: BIOS IRQ 22 for 0.8.INTA is invalid
ACPI: Found matching pin for 0.10.INTA at func 0: 23
pci_link18: BIOS IRQ 23 for 0.10.INTA is invalid
pci5: <ACPI PCI bus> on pcib1
pci5: physical bus=5
found->	vendor=0x173b, dev=0x03ea, revid=0x15
	bus=5, slot=7, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 64, base d8000000, size 16, enabled
pcib1: (null) requested memory range 0xd8000000-0xd800ffff: good
pcib1: matched entry for 5.7.INTA (src \\_SB_.PCI0.APC2:0)
pci_link17: Picked IRQ 17 with weight 0
pcib1: slot 7 INTA routed to irq 17 via \\_SB_.PCI0.APC2
bge0: <Altima AC9100 Gigabit Ethernet, ASIC rev. 0x105> mem 0xd8000000-0xd800ffff irq 17 at device 7.0 on pci5
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd8000000
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:09:5b:8e:63:2f
bge0: [MPSAFE]
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xd8100000-0xd8100fff irq 23 at device 10.0 on pci0
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8100000
nve0: Ethernet address 00:13:d4:36:79:07
miibus1: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x005043, model 0x000c, rev. 2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:13:d4:36:79:07
nve0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR3 - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xfff00000-0xfffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR2 - AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4:   secondary bus     2
pcib4:   subordinate bus   2
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xfff00000-0xfffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib4
pci2: physical bus=2
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5:   secondary bus     1
pcib5:   subordinate bus   1
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xd0000000-0xd7ffffff
pcib5:   prefetched decode 0xc0000000-0xcfffffff
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR0 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib5
pci1: physical bus=1
found->	vendor=0x10de, dev=0x0141, revid=0xa2
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base d0000000, size 26, enabled
pcib5: (null) requested memory range 0xd0000000-0xd3ffffff: good
	map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib5: (null) requested memory range 0xc0000000-0xcfffffff: good
	map[1c]: type 1, range 64, base d4000000, size 24, enabled
pcib5: (null) requested memory range 0xd4000000-0xd4ffffff: good
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APC3:0)
pci_link18: Picked IRQ 18 with weight 0
pcib0: slot 14 INTA routed to irq 18 via \\_SB_.PCI0.APC3
pcib5: slot 0 INTA is routed to irq 18
pci1: <display, VGA> at device 0.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x829 0x839 0x829 0x829
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff pnpid ORM0000 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8a9 0x8a9 0x8a9 0x8a9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100515309 hz
Timecounter "TSC" frequency 2412374352 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on nVidia nForce4 chip
acd0: setting UDMA66 on nVidia nForce4 chip
acd0: <DV-W516E/1.05> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 1419KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 286188MB <Maxtor 6L300S0 BANC1G10> at ata4-master SATA150
ad8: 586114704 sectors [581463C/16H/63S] 16 sectors/interrupt 1 depth queue
ad8: nVidia check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 286188MB <Maxtor 6L300S0 BANC1G10> at ata5-master SATA150
ad10: 586114704 sectors [581463C/16H/63S] 16 sectors/interrupt 1 depth queue
ad10: nVidia check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
pcm0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad8
GEOM: new disk ad10
Trying to mount root from ufs:/dev/ad8s1a
start_init: trying /sbin/init
bge0: link state changed to DOWN
nve0: link state changed to UP
splash: image decoder found: daemon_saver
bge0: watchdog timeout -- resetting

----Next_Part(Sat_Sep_17_15_14_08_2005_164)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="dmesg-MAXMEM=2G.txt"

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #12: Sat Sep 17 08:44:12 JST 2005
    fujita@oscar:/usr/obj/usr/src/sys/OSCAR
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a62000.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80a621d0.
Preloaded elf obj module "/boot/kernel/snd_ich.ko" at 0xffffffff80a627f8.
Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff80a62d60.
Preloaded elf obj module "/boot/kernel/smb.ko" at 0xffffffff80a631c8.
Preloaded elf obj module "/boot/kernel/ichsmb.ko" at 0xffffffff80a63630.
ACPI APIC Table: <Nvidia AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193257 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2412375335 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2412.38-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f32  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
  Hyperthreading: 2 logical CPUs
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000b60000 - 0x000000007c3bbfff, 2072363008 bytes (505948 pages)
avail memory = 2062155776 (1966 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
MADT: Interrupt override: source 14, irq 14
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
MADT: Interrupt override: source 15, irq 15
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
null: <null device, zero device>
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80004004
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=058000] [hdr=00] is there (id=005e10de)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 1 func 0
pci_link0: <ACPI PCI Link LNK1> on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNK2> irq 3 on acpi0
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: <ACPI PCI Link LUBA> on acpi0
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: <ACPI PCI Link LUBB> on acpi0
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: <ACPI PCI Link LMAC> irq 3 on acpi0
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: <ACPI PCI Link LACI> irq 5 on acpi0
pci_link8: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link8: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: <ACPI PCI Link LMCI> on acpi0
pci_link9: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link9: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: <ACPI PCI Link LSMB> on acpi0
pci_link10: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link10: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: <ACPI PCI Link LUB2> on acpi0
pci_link11: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link11: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: <ACPI PCI Link LIDE> on acpi0
pci_link12: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link12: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: <ACPI PCI Link LSID> irq 5 on acpi0
pci_link13: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 7 9 10 11 12 14 15
pci_link13: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: <ACPI PCI Link LFID> irq 11 on acpi0
pci_link14: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 7 9 10 11 12 14 15
pci_link14: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: <ACPI PCI Link LPCA> on acpi0
pci_link15: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link15: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 7 9 10 11 12 14 15
pci_link16: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link16: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link16: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link16: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link17: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link17: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link17: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link17: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  17
pci_link18: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link18: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link18: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link18: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  18
pci_link19: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link19: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link19: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link19: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  19
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link20: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   16   N     0  16
pci_link20: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   16   N     0  16
pci_link20: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  16
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link21: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link21: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link21: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link22: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link22: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link23: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link23: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link24: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link24: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link25: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link25: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link26: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link26: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link27: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link27: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link28: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link28: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link29: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link29: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: <ACPI PCI Link APSJ> irq 0 on acpi0
pci_link30: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link30: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: <ACPI PCI Link APCP> irq 0 on acpi0
pci_link31: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
pci_link31: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  20 21 22 23
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x10de, dev=0x005e, revid=0xa3
	bus=0, slot=0, func=0
	class=05-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0050, revid=0xa3
	bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0052, revid=0xa2
	bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  5, enabled
	map[20]: type 4, range 32, base 00004c00, size  6, enabled
	map[24]: type 4, range 32, base 00004c40, size  6, enabled
found->	vendor=0x10de, dev=0x005a, revid=0xa2
	bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d8104000, size 12, enabled
found->	vendor=0x10de, dev=0x005b, revid=0xa3
	bus=0, slot=2, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base feb00000, size  8, enabled
found->	vendor=0x10de, dev=0x0059, revid=0xa2
	bus=0, slot=4, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
	map[14]: type 4, range 32, base 0000e000, size  8, enabled
	map[18]: type 1, range 32, base d8103000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.APCJ:0)
pci_link24: Picked IRQ 20 with weight 0
pcib0: slot 4 INTA routed to irq 20 via \\_SB_.PCI0.APCJ
found->	vendor=0x10de, dev=0x0053, revid=0xf2
	bus=0, slot=6, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x10de, dev=0x0054, revid=0xf3
	bus=0, slot=7, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 000009f0, size  3, enabled
	map[14]: type 4, range 32, base 00000bf0, size  2, enabled
	map[18]: type 4, range 32, base 00000970, size  3, enabled
	map[1c]: type 4, range 32, base 00000b70, size  2, enabled
	map[20]: type 4, range 32, base 0000d800, size  4, enabled
	map[24]: type 1, range 32, base d8102000, size 12, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.APSI:0)
pci_link29: Picked IRQ 21 with weight 0
pcib0: slot 7 INTA routed to irq 21 via \\_SB_.PCI0.APSI
found->	vendor=0x10de, dev=0x0055, revid=0xf3
	bus=0, slot=8, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 000009e0, size  3, enabled
	map[14]: type 4, range 32, base 00000be0, size  2, enabled
	map[18]: type 4, range 32, base 00000960, size  3, enabled
	map[1c]: type 4, range 32, base 00000b60, size  2, enabled
	map[20]: type 4, range 32, base 0000c400, size  4, enabled
	map[24]: type 1, range 32, base d8101000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.APSJ:0)
pci_link30: Picked IRQ 22 with weight 0
pcib0: slot 8 INTA routed to irq 22 via \\_SB_.PCI0.APSJ
found->	vendor=0x10de, dev=0x005c, revid=0xa2
	bus=0, slot=9, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x0057, revid=0xa3
	bus=0, slot=10, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d8100000, size 12, enabled
	map[14]: type 4, range 32, base 0000b000, size  3, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 23 with weight 0
pcib0: slot 10 INTA routed to irq 23 via \\_SB_.PCI0.APCH
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=12, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=13, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x005d, revid=0xa3
	bus=0, slot=14, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ichsmb0: <SMBus controller> port 0xe400-0xe41f,0x4c00-0x4c3f,0x4c40-0x4c7f at device 1.1 on pci0
ichsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x4c00
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS:0)
pci_link26: Picked IRQ 20 with weight 1
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.PCI0.APCS
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
ohci0: <OHCI (generic) USB controller> mem 0xd8104000-0xd8104fff at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8104000
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 21 with weight 1
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.PCI0.APCF
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeb00000
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCL:0)
pci_link27: Picked IRQ 22 with weight 1
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.PCI0.APCL
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcm0: <nVidia nForce4> port 0xdc00-0xdcff,0xe000-0xe0ff mem 0xd8103000-0xd8103fff irq 20 at device 4.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
pcm0: Reserved 0x100 bytes for rid 0x14 type 4 at 0xe000
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC850 AC97 Codec (id = 0x414c4790)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 7ba37000, 4000; 0xffffffffb1ea6000 -> 7ba37000
pcm0: sndbuf_setmap 7ba1c000, 4000; 0xffffffffb1eaa000 -> 7ba1c000
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd8102000-0xd8102fff irq 21 at device 7.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd800
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xd8102000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
ata3: SATA connect status=00000000
ata3: [MPSAFE]
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xd8101000-0xd8101fff irq 22 at device 8.0 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci2: [MPSAFE]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xd8101000
atapci2: [MPSAFE]
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
ata4: SATA connect ready time=0ms
ata4: sata_connect devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1:   secondary bus     5
pcib1:   subordinate bus   5
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xd8000000-0xd80fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1:   Subtractively decoded bridge.
ACPI: Found matching pin for 0.7.INTA at func 0: 21
pci_link17: BIOS IRQ 21 for 0.7.INTA is invalid
ACPI: Found matching pin for 0.8.INTA at func 0: 22
pci_link18: BIOS IRQ 22 for 0.8.INTA is invalid
ACPI: Found matching pin for 0.10.INTA at func 0: 23
pci_link18: BIOS IRQ 23 for 0.10.INTA is invalid
pci5: <ACPI PCI bus> on pcib1
pci5: physical bus=5
found->	vendor=0x173b, dev=0x03ea, revid=0x15
	bus=5, slot=7, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=3
	powerspec 2  supports D0 D3  current D0
	MSI supports 8 messages, 64 bit
	map[10]: type 1, range 64, base d8000000, size 16, enabled
pcib1: (null) requested memory range 0xd8000000-0xd800ffff: good
pcib1: matched entry for 5.7.INTA (src \\_SB_.PCI0.APC2:0)
pci_link17: Picked IRQ 17 with weight 0
pcib1: slot 7 INTA routed to irq 17 via \\_SB_.PCI0.APC2
bge0: <Altima AC9100 Gigabit Ethernet, ASIC rev. 0x105> mem 0xd8000000-0xd800ffff irq 17 at device 7.0 on pci5
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd8000000
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:09:5b:8e:63:2f
bge0: [MPSAFE]
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xd8100000-0xd8100fff irq 23 at device 10.0 on pci0
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd8100000
nve0: Ethernet address 00:13:d4:36:79:07
miibus1: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: OUI 0x005043, model 0x000c, rev. 2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:13:d4:36:79:07
nve0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR3 - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xfff00000-0xfffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR2 - AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4:   secondary bus     2
pcib4:   subordinate bus   2
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xfff00000-0xfffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib4
pci2: physical bus=2
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5:   secondary bus     1
pcib5:   subordinate bus   1
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xd0000000-0xd7ffffff
pcib5:   prefetched decode 0xc0000000-0xcfffffff
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.XVR0 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib5
pci1: physical bus=1
found->	vendor=0x10de, dev=0x0141, revid=0xa2
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base d0000000, size 26, enabled
pcib5: (null) requested memory range 0xd0000000-0xd3ffffff: good
	map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib5: (null) requested memory range 0xc0000000-0xcfffffff: good
	map[1c]: type 1, range 64, base d4000000, size 24, enabled
pcib5: (null) requested memory range 0xd4000000-0xd4ffffff: good
pcib0: matched entry for 0.14.INTA (src \\_SB_.PCI0.APC3:0)
pci_link18: Picked IRQ 18 with weight 0
pcib0: slot 14 INTA routed to irq 18 via \\_SB_.PCI0.APC3
pcib5: slot 0 INTA is routed to irq 18
pci1: <display, VGA> at device 0.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x829 0x839 0x829 0x829
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff pnpid ORM0000 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8a9 0x8a9 0x8a9 0x8a9
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132689 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100515310 hz
Timecounter "TSC" frequency 2412375335 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
acd0: setting PIO4 on nVidia nForce4 chip
acd0: setting UDMA66 on nVidia nForce4 chip
acd0: <DV-W516E/1.05> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 1419KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 286188MB <Maxtor 6L300S0 BANC1G10> at ata4-master SATA150
ad8: 586114704 sectors [581463C/16H/63S] 16 sectors/interrupt 1 depth queue
ad8: nVidia check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 286188MB <Maxtor 6L300S0 BANC1G10> at ata5-master SATA150
ad10: 586114704 sectors [581463C/16H/63S] 16 sectors/interrupt 1 depth queue
ad10: nVidia check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
pcm0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad8
GEOM: new disk ad10
Trying to mount root from ufs:/dev/ad8s1a
start_init: trying /sbin/init
nve0: link state changed to UP
splash: image decoder found: daemon_saver
bge0: link state changed to UP

----Next_Part(Sat_Sep_17_15_14_08_2005_164)----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050917.151408.46626816.fujita>