Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 15 Feb 2015 22:48:56 +0800
From:      Ganbold Tsagaankhuu <ganbold@gmail.com>
To:        John Wehle <john@feith.com>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: Initial Amlogic aml8726-m6 and aml8726-m8 support files
Message-ID:  <CAGtf9xOZO_ZyF8sWvcCGJ3aKPsqm5r8qeBDV9ax6xGeWJmzfiw@mail.gmail.com>
In-Reply-To: <201502110535.t1B5Z3c7007720@jwlab.FEITH.COM>
References:  <201502110535.t1B5Z3c7007720@jwlab.FEITH.COM>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 11, 2015 at 1:35 PM, John Wehle <john@feith.com> wrote:

> Ganbold Tsagaankhuu wrote on Mon Feb 2 07:19:11 UTC 2015:
>
> > Maybe making mmc stable is more priority.
>
> Try the attached patch.
>
> -- John
> --------------------8<-------------------8<-----------------------------
> --- sys/arm/amlogic/aml8726/aml8726_mmc.c.ORIGINAL      2015-01-07
> 00:57:31.000000000 -0500
> +++ sys/arm/amlogic/aml8726/aml8726_mmc.c       2015-02-10
> 23:51:49.000000000 -0500
> @@ -353,7 +353,8 @@ aml8726_mmc_intr(void *arg)
>                 return;
>         }
>
> -       if ((isr & AML_MMC_IRQ_STATUS_CMD_BUSY) != 0) {
> +       if ((isr & AML_MMC_IRQ_STATUS_CMD_BUSY) != 0
> +           && (isr & AML_MMC_IRQ_STATUS_CMD_DONE_IRQ) == 0) {
>                 if (mmc_error != MMC_ERR_TIMEOUT)
>                         mmc_error = MMC_ERR_FAILED;
>
> @@ -431,13 +432,14 @@ aml8726_mmc_intr(void *arg)
>         }
>
>         /*
> -        * If this command was successfully executed and there's
> -        * a linked stop command, then start the stop command.
> +        * If there's a linked stop command, then start the stop command.
> +        * In order to establish a known state attempt the stop command
> +        * even if the original request encountered an error.
>          */
>
>         stop_cmd = (cmd->mrq->stop != cmd) ? cmd->mrq->stop : NULL;
>
> -       if (stop_cmd != NULL && mmc_error == MMC_ERR_NONE) {
> +       if (stop_cmd != NULL) {
>                 mmc_stop_error = aml8726_mmc_start_command(sc, stop_cmd);
>                 if (mmc_stop_error == MMC_ERR_NONE) {
>                         AML_MMC_UNLOCK(sc);
> -------------------------------------------------------------------------
> |   Feith Systems  |   Voice: 1-215-646-8000  |  Email: john@feith.com  |
> |    John Wehle    |     Fax: 1-215-540-5495  |                         |
> -------------------------------------------------------------------------
>
>
It seems better, but still panics.

http://pastebin.ca/2928101


Ganbold



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGtf9xOZO_ZyF8sWvcCGJ3aKPsqm5r8qeBDV9ax6xGeWJmzfiw>