Date: Fri, 08 Nov 2013 00:22:03 +0200 From: clutton <clutton@zoho.com> To: freebsd-wireless@freebsd.org, freebsd-arch@freebsd.org Cc: Bernhard Schmidt <bschmidt@techwires.net>, Adrian Chadd <adrian@freebsd.org> Subject: Re: service netif restart [iface] runs a wpa_supplicant twice Message-ID: <1383862923.70321.87.camel@eva02.mbsd> In-Reply-To: <201311061159.14824.jhb@freebsd.org> References: <1382572583.1862.39.camel@eva02.mbsd> <CAAgh0_aFdJTYVvgczt=wvKdUFR90hLiVS%2BFRbXZyvrVVpWvbYA@mail.gmail.com> <201311051717.30519.jhb@freebsd.org> <201311061159.14824.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-BVm0CXnSENNJNebfmTOo
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
On Wed, 2013-11-06 at 11:59 -0500, John Baldwin wrote:
> On Tuesday, November 05, 2013 5:17:30 pm John Baldwin wrote:
> > On Tuesday, November 05, 2013 2:33:50 pm Bernhard Schmidt wrote:
> > > On Tue, Nov 5, 2013 at 5:54 PM, John Baldwin <jhb@freebsd.org> wrote:
> > > > On Sunday, November 03, 2013 12:56:08 pm Adrian Chadd wrote:
> > > >> On 2 November 2013 12:13, clutton <clutton@zoho.com> wrote:
> > > >>
> > > >> [snip]
> > > >>
> > > >> > What was happened? netif tries to setup wlan0 (clone, wpa, dhcp,=
etc),
> > > >> > when wlan0 interface occurs, devd runs another copy of netif.
> > > >>
> > > >> Well, it sounds like we need to pick an architecture _and_ fix the
> > > >> behaviour here.
> > > >>
> > > >> Which is:
> > > >>
> > > >>
> > > >> * I think wpa-supplicant should always run if it's required in /et=
c/rc.conf;
> > > >> * netif should check if devd is configured and if so, just leave t=
he
> > > >> configuration up to devd
> > > >> * if it isn't running, then devd should be responsible for
> > > >> dhclient/add-to-wpa-config
> > > >>
> > > >> What we first have to establish is whether add_interface and
> > > >> remove_interface (or whatever they're called) are correctly workin=
g,
> > > >> for ethernet and wifi driver types. Then, we need to ensure they c=
an
> > > >> coexist (ie, one wpa_supplicant, but with both ethernet/wifi drive=
rs
> > > >> loaded and active on their relevant interfaces.) _then_ we can bre=
ak
> > > >> out the "stuff devd does" out of netif and have _either_ netif (x)=
or
> > > >> devd call this new script to setup/teardown the interface runtime
> > > >> state.
> > > >>
> > > >> How's that sound?
> > > >
> > > > Note that devd just runs netif (via /etc/pccard_ether), so it's alr=
eady
> > > > just one script, and having netif bail if devd is running would mak=
e
> > > > netif not do anything in the common case.
> > > >
> > > > What normally happens during boot is that '/etc/rc.d/netif start' c=
reates
> > > > wlan0 and runs wpa_supplicant via 'childif_create' making a nested =
call to
> > > > ifn_start for wlan0. That is, childif_create autoruns /etc/rc.d/ne=
tif
> > > > explicitly after it creates the device. Probably that is what shou=
ld be
> > > > removed. That would let devd always start wpa_supplicant via
> > > > /etc/pccard_ether. I've just tested this by doing a stop/start on =
iwn0
> > > > (parent of wlan0, so wlan0 gets destroyed and re-created) and it st=
arted
> > > > wpa_supplicant correctly.
> > > >
> > > > Index: head/etc/network.subr
> > > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> > > > --- network.subr (revision 257705)
> > > > +++ network.subr (working copy)
> > > > @@ -1429,9 +1429,6 @@ childif_create()
> > > > fi
> > > > ${IFCONFIG_CMD} $i name $child && cfg=3D0
> > > > fi
> > > > - if autoif $child; then
> > > > - ifn_start $child
> > > > - fi
> > > > done
> > > >
> > > > # Create vlan interfaces
> > > >
> > > > I also tested vlans created via vlans_<if> and they should use the =
same fix as
> > > > well. Note that this model is more consistent with how cloned_inte=
rfaces
> > > > works where ifn_start is not explicitly run when each interface is =
created.
> > > > Instead, we rely on devd kicking off pccard_ether for those as well=
.
> > >=20
> > > That looks sane too me.
> > >=20
> > > Just one question, I remember that devd is disabled during boot and
> > > activated later through a sysctl (to ignore events entirely), is this
> > > the case before or after netif is running? I guess it is activated
> > > after netif, otherwise we would have seen this issue on booting and
> > > not just during netif restart.
> >=20
> > Hmm, devd starts after netif, but it just worked fine for me when I boo=
ted up.
> > I also misspoke about cloned_interfaces. We manually add the cloned_in=
terface
> > list to the list of interfaces /etc/rc.d/netif iterates over. What I a=
m
> > puzzled by is that this just worked for me during a test boot. Hmm, it=
looks like
> > devctl is no longer disabled during boot and then explicitly enabled by=
devd.
> > devctl is now always enabled during boot, but capped at 1000 entries to=
avoid
> > leaking memory. In fact, it looks like devd tries to recreate a few in=
terfaces
> > after netif finishes and is generally confused. I tried again with dev=
d_flags
> > set to "-n" to flush the initial set of events on boot. This removed t=
he
> > multiple calls to netif on boot on my laptop, but somehow wpa_supplican=
t is
> > still being started by devd (and I'm not sure how now).
>=20
> I've hacked devd some more and can now see what is going on. -n doesn't =
do what
> I thought it does. It does not throw away pending events on startup, it =
just
> makes devd not fork until it has walked the initial set of events. The k=
ernel
> changed (a while ago) to queue the first 1000 events until devd starts up=
. This
> means that in practice devd gets arrival events for all devices in the sy=
stem as
> soon as it starts up and triggers duplicate invocations of netif after ne=
tif
> finishes. However, /etc/pccard_ether ignores attempts to start a device =
that
> is already up, so this should be a no-op on bootup (if my change is rever=
ted)
> as the interfaces should already be configured by the time devd starts. =
I suspect
> what happens in multiuser is that devd fires off pccard_ether and sees th=
at the
> interface isn't up before the original netif has a chance to invoke the n=
ested
> ifn_start. We could perhaps change it so we only invoke ifn_start if dev=
d
> isn't running.
>=20
> One other thought: I restart my wireless interfaces by doing
> 'sh /etc/rc.d/netif restart wlan0', not 'iwn0'. This doesn't teardown/re=
create
> the wlan0 device, so it doesn't suffer from the issue reported by the OP.
>=20
> Here is a change I've tested that seems to do the right thing both at boo=
t time
> and doing a restart of either iwn0 or wlan0 at runtime. If devd is runni=
ng
> it leaves the task of starting an interface up to devd, otherwise (such a=
s during
> boot), it configures the new child interface synchronously.
>=20
> Note that pgrep is in /bin.
>=20
> Index: network.subr
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> --- network.subr (revision 257747)
> +++ network.subr (working copy)
> @@ -1406,10 +1406,14 @@ clone_down()
> #
> childif_create()
> {
> - local cfg child child_vlans child_wlans create_args debug_flags ifn i
> + local cfg child child_vlans child_wlans create_args debug_flags devd \
> + ifn i
> cfg=3D1
> ifn=3D$1
> =20
> + # Check if devd is running
> + devd=3D$(pgrep devd)
> +
> # Create wireless interfaces
> child_wlans=3D`get_if_var $ifn wlans_IF`
> =20
> @@ -1429,6 +1433,9 @@ childif_create()
> fi
> ${IFCONFIG_CMD} $i name $child && cfg=3D0
> fi
> + if [ -z "$devd" ] && autoif $child; then
> + ifn_start $child
> + fi
> done
> =20
> # Create vlan interfaces
> @@ -1452,6 +1459,9 @@ childif_create()
> ${IFCONFIG_CMD} $i name $child && cfg=3D0
> fi
> fi
> + if [ -z "$devd" ] && autoif $child; then
> + ifn_start $child
> + fi
> done
> =20
> return ${cfg}
>=20
Yes, the "service netif restart wlan0" doesn't teardown/recreate the
wlan0 device. Anyway, a "service netif restart" does.
What about removing this functionality, instead? See the patch below.
The pros:
1) creating the wlan interface by hand (by ifconfig) means that the
further configuration is going to be in that way, by hand (by ifconfig,
route, dhcpclient, etc).
2) already written down configuration (in rc.conf) means working with rc
subsystem (netif)
3) I have no idea why somebody would expect from a command "ifconfig
wlan0 create wlandev ath0" the same behaviour as from a "service netif
start wlan0".
4) Let's remove the unexpected behaviour at all, it's prone error, it's
not obviously at first glance, some kind of clever computer which knows
better what do you need. I think that we have this functionality
occasionally, no one had designed this on purpose, am I wrong?
The cons:
I have none. You told me.
=CE=9E ~ =E2=86=92 diff -u /usr/src/etc/devd.conf /etc/devd.conf =20
--- /usr/src/etc/devd.conf 2013-09-29 17:24:16.759250174 +0300
+++ /etc/devd.conf 2013-11-07 23:43:17.833616197 +0200
@@ -38,7 +38,7 @@
#
notify 0 {
match "system" "IFNET";
- match "subsystem" "!usbus[0-9]+";
+ match "subsystem" "!(usbus|wlan|vlan)[0-9]+";
match "type" "ATTACH";
action "/etc/pccard_ether $subsystem start";
};
--=-BVm0CXnSENNJNebfmTOo
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (FreeBSD)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=Fusc
-----END PGP SIGNATURE-----
--=-BVm0CXnSENNJNebfmTOo--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1383862923.70321.87.camel>