From owner-freebsd-current@FreeBSD.ORG Tue Jan 9 10:54:32 2007 Return-Path: X-Original-To: freebsd-current@freebsd.org Delivered-To: freebsd-current@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id E456E16A407 for ; Tue, 9 Jan 2007 10:54:31 +0000 (UTC) (envelope-from dom@helenmarks.co.uk) Received: from mailhost.graphdata.co.uk (mailhost.graphdata.co.uk [195.12.22.194]) by mx1.freebsd.org (Postfix) with ESMTP id 2DB0113C474 for ; Tue, 9 Jan 2007 10:54:31 +0000 (UTC) (envelope-from dom@helenmarks.co.uk) Received: from localhost (localhost [127.0.0.1]) by mailhost.graphdata.co.uk (Postfix) with ESMTP id BBFEE114020 for ; Tue, 9 Jan 2007 10:54:29 +0000 (GMT) X-Virus-Scanned: amavisd-new at graphdata.co.uk Received: from mailhost.graphdata.co.uk ([127.0.0.1]) by localhost (mailhost.graphdata.co.uk [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 9247fUwh+qXX for ; Tue, 9 Jan 2007 10:54:26 +0000 (GMT) Received: from gdc083.internal.graphdata.co.uk (gdc083.internal.graphdata.co.uk [192.168.0.86]) by mailhost.graphdata.co.uk (Postfix) with SMTP id 41F5D114026 for ; Tue, 9 Jan 2007 10:54:26 +0000 (GMT) Date: Tue, 9 Jan 2007 10:54:25 +0000 From: Dominic Marks To: freebsd-current@freebsd.org Message-Id: <20070109105425.1cdde85a.dom@helenmarks.co.uk> In-Reply-To: <09BFF2FA5EAB4A45B6655E151BBDD90302C25B4F@NT-IRVA-0750.brcm.ad.broadcom.com> References: <20070108171952.2f1a0c8d.dom@helenmarks.co.uk> <09BFF2FA5EAB4A45B6655E151BBDD90302C25B4F@NT-IRVA-0750.brcm.ad.broadcom.com> X-Mailer: Sylpheed 2.3.0 (GTK+ 2.10.6; i386-portbld-freebsd6.2) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: Re: CURRENT from 04/01/07 + bge NIC panic X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 09 Jan 2007 10:54:32 -0000 On Mon, 8 Jan 2007 18:46:48 -0800 "David Christensen" wrote: > The driver is calling into ukphy_service which means the PHY ID table is > not correct for -CURRENT. Scott Long checked in some changes for the > RELENG_6 tree to support this chip on this platform in mid-December > which should be migrated to -CURRENT. Could you try RELENG_6 to make > sure it's the same issue? I was installing CURRENT because I couldn't STABLE to recognise the NIC. Perhaps my STABLE CD was older than I thought. I'll try a fresh one and it let you know what happens. Thanks, Dom > Dave > > > -----Original Message----- > > From: owner-freebsd-current@freebsd.org > > [mailto:owner-freebsd-current@freebsd.org] On Behalf Of Dominic Marks > > Sent: Monday, January 08, 2007 9:20 AM > > To: freebsd-current@freebsd.org > > Subject: CURRENT from 04/01/07 + bge NIC panic > > > > Hello, > > > > I have a PowerEdge SC440 which panics when I set an IP to its > > bge interface. I have serial console and it is sitting a ddb > > prompt. > > > > This is plain CURRENT, I made my own snapshot hence the uname. > > I had a look at cvsweb but didn't see any commits to bge in > > since this source. > > > > # uname -a > > FreeBSD 7.0-SNAPSHOT-20060104 FreeBSD 7.0-SNAPSHOT-20060104 > > #0: Thu Jan 4 20:43:26 UTC 2007 > > root@turtle.internal.graphdata.co.uk:/usr/obj/usr/src/sys/GENE > > RIC i386 > > > > # cat /var/run/dmesg.boot > > Copyright (c) 1992-2007 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > > 1993, 1994 The Regents of the University of California. All > > rights reserved. FreeBSD is a registered trademark of The > > FreeBSD Foundation. FreeBSD 7.0-SNAPSHOT-20060104 #0: Thu Jan > > 4 20:43:26 UTC 2007 > > root@turtle.internal.graphdata.co.uk:/usr/obj/usr/src/sys/GENERIC > > WARNING: WITNESS option enabled, expect reduced performance. > > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel > > (R) Celeron(R) CPU 2.80GHz (2793.09-MHz 686-class CPU) Origin = > > "GenuineIntel" Id = 0xf49 Stepping = 9 > > Features=0xbfebfbff P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2> > ,SS,HTT,TM,PBE> > > Features2=0x651d > > AMD Features=0x20100000 AMD Features2=0x1 > > real memory = 535281664 (510 MB) > > avail memory = 510054400 (486 MB) > > ACPI APIC Table: > > ioapic0: Changing APIC ID to 8 > > ioapic0 irqs 0-23 on motherboard > > lapic0: Forcing LINT1 to edge trigger > > kbd1 at kbdmux0 > > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, > > RF2413, RF5413) acpi0: on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on > > acpi0 cpu0: on acpi0 > > acpi_button0: on acpi0 > > pcib0: port 0xcf8-0xcff on acpi0 > > pci0: on pcib0 > > pcib1: irq 16 at device 1.0 on pci0 > > pci1: on pcib1 > > pcib2: irq 16 at device 28.0 on pci0 > > pci2: on pcib2 > > pcib3: irq 16 at device 28.4 on pci0 > > pci3: on pcib3 > > pcib4: irq 17 at device 28.5 on pci0 > > pci4: on pcib4 > > bge0: > rev. 0xb002> mem 0xefcf0000-0xefcfffff irq 17 at device 0.0 on > > pci4 miibus0: on bge0 ukphy0: > media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, > > 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: > > Ethernet address: 00:13:72:35:f5:d0 uhci0: > controller> port 0xff80-0xff9f irq 21 at device 29.0 on pci0 > > uhci0: [GIANT-LOCKED] > > usb0: on uhci0 > > usb0: USB revision 1.0 > > uhub0: > > on usb0 uhub0: 2 ports with 2 removable, self powered > > uhci1: port 0xff60-0xff7f irq > > 22 at device 29.1 on pci0 > > uhci1: [GIANT-LOCKED] > > usb1: on uhci1 > > usb1: USB revision 1.0 > > uhub1: > > on usb1 uhub1: 2 ports with 2 removable, self powered > > uhci2: port 0xff40-0xff5f irq > > 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] > > usb2: on uhci2 > > usb2: USB revision 1.0 > > uhub2: > > on usb2 uhub2: 2 ports with 2 removable, self powered > > uhci3: port 0xff20-0xff3f irq > > 23 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] > > usb3: on uhci3 > > usb3: USB revision 1.0 > > uhub3: > > on usb3 uhub3: 2 ports with 2 removable, self powered > > ehci0: mem > > 0xff980800-0xff980bff irq 21 at device 29.7 on pci0 ehci0: > > [GIANT-LOCKED] usb4: waiting for BIOS to give up control > > usb4: EHCI version 1.0 > > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > > usb4: on ehci0 > > usb4: USB revision 2.0 > > uhub4: > > on usb4 uhub4: 8 ports with 8 removable, self powered > > pcib5: at device 30.0 on pci0 > > pci5: on pcib5 > > vgapci0: port 0xdc00-0xdcff mem > > 0xe0000000-0xe7ffffff,0xefaf0000-0xefafffff irq 19 at device > > 7.0 on pci5 isab0: at device 31.0 on pci0 > > isa0: on isab0 atapci0: > controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at > > device 31.1 on pci0 ata0: on atapci0 > > ata1: on atapci0 > > atapci1: port > > 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfecf > > mem 0xeffffc00-0xefffffff irq 20 at device 31.2 on pci0 ata2: > > on atapci1 ata3: on atapci1 > > pci0: at device 31.3 (no driver attached) > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags > > 0x10 on acpi0 sio0: type 16550A, console sio0: [FAST] > > pmtimer0 on isa0 > > orm0: at iomem > > 0xc0000-0xc8fff,0xc9000-0xcafff,0xcb000-0xcbfff pnpid ORM0000 > > on isa0 atkbdc0: at port > > 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 > > at atkbd0 atkbd0: [GIANT-LOCKED] > > ppc0: parallel port not found. > > sc0: at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x100> > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > vga0: at port 0x3c0-0x3df iomem > > 0xa0000-0xbffff on isa0 ukbd0: > class 0/0, rev 1.10/1.05, addr 2> on uhub3 kbd2 at ukbd0 > > uhid0: > addr 2> on uhub3 Timecounter "TSC" frequency 2793085123 Hz > > quality 800 Timecounters tick every 1.000 msec > > acd0: CDROM at ata0-master PIO4 > > ad4: 238418MB at ata2-master > > SATA150 Trying to mount root from ufs:/dev/ad4s1a > > WARNING: /var was not properly dismounted > > WARNING: /var/log was not properly dismounted > > > > # pciconf -lv > > hostb0@pci0:0:0: class=0x060000 card=0x01df1028 > > chip=0x27788086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' > > device = 'E7230/3000/3010 Processor to I/O Controller' > > class = bridge > > subclass = HOST-PCI > > pcib1@pci0:1:0: class=0x060400 card=0x00000088 chip=0x27798086 > > rev=0x00 hdr=0x01 vendor = 'Intel Corporation' > > device = 'E7230/3000/3010 PCI Express Root Port' > > class = bridge > > subclass = PCI-PCI > > pcib2@pci0:28:0: class=0x060400 card=0x00000040 > > chip=0x27d08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) PCI Express Root Port' > > class = bridge > > subclass = PCI-PCI > > pcib3@pci0:28:4: class=0x060400 card=0x00000040 > > chip=0x27e08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' > > device = '82801GR/GH/GHM (ICH7 Family) PCI Express Root > > Port' class = bridge > > subclass = PCI-PCI > > pcib4@pci0:28:5: class=0x060400 card=0x00000040 > > chip=0x27e28086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' > > device = '82801GR/GH/GHM (ICH7 Family) PCI Express Root > > Port' class = bridge > > subclass = PCI-PCI > > uhci0@pci0:29:0: class=0x0c0300 card=0x01df1028 > > chip=0x27c88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB Universal Host > > Controller' class = serial bus > > subclass = USB > > uhci1@pci0:29:1: class=0x0c0300 card=0x01df1028 > > chip=0x27c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB Universal Host > > Controller' class = serial bus > > subclass = USB > > uhci2@pci0:29:2: class=0x0c0300 card=0x01df1028 > > chip=0x27ca8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB Universal Host > > Controller' class = serial bus > > subclass = USB > > uhci3@pci0:29:3: class=0x0c0300 card=0x01df1028 > > chip=0x27cb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB Universal Host > > Controller' class = serial bus > > subclass = USB > > ehci0@pci0:29:7: class=0x0c0320 card=0x01df1028 > > chip=0x27cc8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB 2.0 Enhanced Host > > Controller' class = serial bus > > subclass = USB > > pcib5@pci0:30:0: class=0x060401 card=0x00000050 > > chip=0x244e8086 rev=0xe1 hdr=0x01 vendor = 'Intel Corporation' > > device = '82801BA/CA/DB/DBL/EB/ER/FB/GB/HB > > (ICH2/3/4/4/5/5/6/7/8), 63xxESB Hub Interface to PCI Bridge' > > class = bridge subclass = PCI-PCI > > isab0@pci0:31:0: class=0x060100 card=0x00000000 > > chip=0x27b88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801GB/GR (ICH7 Family) LPC Interface > > Controller' class = bridge > > subclass = PCI-ISA > > atapci0@pci0:31:1: class=0x01018a card=0x01df1028 > > chip=0x27df8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) Ultra ATA Storage > > Controller' class = mass storage > > subclass = ATA > > atapci1@pci0:31:2: class=0x01018f card=0x01df1028 > > chip=0x27c08086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage > > Controller' class = mass storage > > subclass = ATA > > none0@pci0:31:3: class=0x0c0500 card=0x01df1028 > > chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) SMBus Controller' > > class = serial bus > > subclass = SMBus > > bge0@pci4:0:0: class=0x020000 card=0x01df1028 chip=0x167a14e4 > > rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' > > device = 'NetXtreme BCM5754 Gigabit Ethernet PCI Express' > > class = network > > subclass = ethernet > > vgapci0@pci5:7:0: class=0x030000 card=0x01df1028 > > chip=0x515e1002 rev=0x02 hdr=0x00 vendor = 'ATI Technologies > > Inc.' device = 'Radeon ES1000 Radeon ES1000' > > class = display > > subclass = VGA > > > > To trigger the panic: > > > > # dhclient bge0 > > panic: invalid ife->ifm_data (0xa) in mii_phy_setmedia > > cpuid = 0 > > KDB: enter: panic > > [thread pid 650 tid 100063 ] > > Stopped at kdb_enter+0x2b: nop > > db> where > > Tracing pid 650 tid 100063 td 0xc30ead80 > > kdb_enter(c094055e) at kdb_enter+0x2b > > panic(c092025d,a,d0391b4b,c2,ce8eea68,...) at panic+0x11c > > mii_phy_setmedia(c2e74580) at mii_phy_setmedia+0x83 > > ukphy_service(c2e74580,c2e74e40,2) at ukphy_service+0xfd > > mii_mediachg(c2e74e40,8803,c2e74e40,c2e6c800,c2e76000,...) at > > mii_mediachg+0x27 bge_stop > > (c2e76000,80206910,c30d0000,c2e76000,d60e6b80,...) at bge_stop > > +0x58b bge_init_locked(c2e76000) at bge_init_locked+0x36 > > bge_ioctl(c2e6c800,80206910,c30d0000) at bge_ioctl+0x136 > > ifhwioctl(80206910,c2e6c800,c30d0000,c30ead80) at ifhwioctl > > +0x3b2 ifioctl(c30de530,80206910,c30d0000,c30ead80,0,...) at > > ifioctl+0x101 soo_ioctl > > (c3010a20,80206910,c30d0000,c31fea00,c30ead80) at soo_ioctl > > +0x2db kern_ioctl(c30ead80,3,80206910,c30d0000) at kern_ioctl > > +0x296 ioctl(c30ead80,d60e6d00) at ioctl+0xf1 syscall(d60e6d38) > > at syscall+0x256 Xint0x80_syscall() at Xint0x80_syscall+0x20 > > --- syscall (0, FreeBSD ELF32, nosys), eip = 0x2, esp = 0x247, > > ebp = 0x1 --- > > > > The panic comes from this KASSERT in mii_physubr.c > > > > KASSERT(ife->ifm_data >=0 && ife->ifm_data < MII_NMEDIA, > > ("invalid ife->ifm_data (0x%x) in mii_phy_setmedia", > > ife->ifm_data)); > > > > Let me know what other information I can provide. > > > > Thanks, > > Dominic > > _______________________________________________ > > freebsd-current@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-current > > To unsubscribe, send any mail to > > "freebsd-current-unsubscribe@freebsd.org" > > > > > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"