Date: Thu, 6 Nov 2003 18:06:09 -0600 From: "Cagle, John (ISS-Houston)" <john.cagle@hp.com> To: "John Baldwin" <jhb@FreeBSD.org> Cc: smp@FreeBSD.org Subject: RE: HEADSUP: Committing new interrupt code, tree will be broken Message-ID: <C50AB9511EE59B49B2A503CB7AE1ABD106610E7F@cceexc19.americas.cpqcorp.net>
next in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: John Baldwin > > My GENERIC build finished ok, so it should at least be workable for > most people. By the way, if anyone has a machine with 8 or more CPUs > (John Cagle, I know you are out there. :)) feel free to test the new > code out and post a boot -v dmesg log to the smp@ list. Thanks. Hi John! Yes, I'm out here! ;-) Attached below is a dmesg from the ProLiant DL560 which has 4 XEON-HTT processors. I'll try the 8-way next. This PAE kernel is from a cvsup early this morning. Thanks, John Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Thu Nov 6 17:36:05 GMT 2003 root@bigdaddy:/usr/obj/usr/src/sys/PAE Preloaded elf kernel "/boot/kernel/kernel" at 0xc06fd000. ACPI APIC Table: <COMPAQ 00000083> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) XEON(TM) MP CPU 1.90GHz (1889.38-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf22 Stepping =3D 2 =20 Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> Hyperthreading: 2 logical CPUs real memory =3D 9126801408 (8703 MB) avail memory =3D 8611352576 (8212 MB) FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard ioapic3 <Version 1.1> irqs 48-63 on motherboard Pentium Pro MTRR support enabled acpi0: <COMPAQ P30 > on motherboard ACPI-1016: *** Info: There are no GPE blocks defined in the FADT acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 pcibios: BIOS version 2.10 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_cpu4: <CPU> on acpi0 acpi_cpu5: <CPU> on acpi0 acpi_cpu6: <CPU> on acpi0 acpi_cpu7: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: _CRS resource entry has unsupported type 14 pci0: <display, VGA> at device 3.0 (no driver attached) pci0: <base peripheral> at device 4.0 (no driver attached) pci0: <base peripheral> at device 4.2 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: simplex device, DMA on primary only ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 15.2 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7df0000-0xf7df3fff,0xf7ec0000-0xf7efffff irq 30 at device 3.0 on pci1 pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 31 at device 1.0 on pci2 bge0: Ethernet address: 00:0b:cd:29:69:35 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 23 at device 2.0 on pci2 bge1: Ethernet address: 00:0b:cd:29:69:36 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib3: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI Host-PCI bridge> on acpi0 pci6: <ACPI PCI bus> on pcib4 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4 GEOM: create disk da0 dp=3D0xd29da450 da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device=20 da0: 135.168MB/s transfers da0: 17359MB (35553120 512 byte sectors: 255H 32S/T 4357C) SMP: AP CPU #7 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! Mounting root from ufs:/dev/da0s1a bge0: gigabit link up
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C50AB9511EE59B49B2A503CB7AE1ABD106610E7F>