From owner-freebsd-current Sun Sep 2 13: 5:46 2001 Delivered-To: freebsd-current@freebsd.org Received: from ns.altadena.net (ns.altadena.net [206.126.144.2]) by hub.freebsd.org (Postfix) with ESMTP id 9D83037B401 for ; Sun, 2 Sep 2001 13:05:32 -0700 (PDT) Received: (from pete@localhost) by ns.altadena.net (8.11.3/8.8.8) id f82K1vo07551 for current@freebsd.org; Sun, 2 Sep 2001 13:01:57 -0700 (PDT) (envelope-from pete) From: Pete Carah Message-Id: <200109022001.f82K1vo07551@ns.altadena.net> Subject: Re: ACPI problems To: current@freebsd.org Date: Sun, 2 Sep 2001 13:01:56 -0700 (PDT) X-Mailer: ELM [version 2.4ME+ PL68 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=iso8859-1 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I have a panic that I haven't seen in the notes so far; if I allow load of the acpi module, it gets a "can't allocate memory" very early in the boot process. Hopefully the following is complete - KDE2 cut-and-paste didn't work as I expected for a big region. Motherboard is ASUS A7V with 1.2G processor. DMESG (with old kernel and without ACPI) follows: ---------------------------------------------------------- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Mon Aug 20 22:26:20 PDT 2001 root@seagull.altadena.net:/usr/src/sys/i386/compile/SEAGULL Calibrating clock(s) ... TSC clock: 1208810099 Hz, i8254 clock: 1193250 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1208750410 Hz CPU: AMD Athlon(tm) Processor (1208.75-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x642 Stepping = 2 Features=0x183f9ff AMD Features=0xc0440000<,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 805224448 (786352K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x003cf000 - 0x2ffe3fff, 801198080 bytes (195605 pages) avail memory = 776478720 (758280K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f92a0 bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1150 pnpbios: Found PnP BIOS data at 0xc00fc2b0 pnpbios: Entry = f0000:c2e0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: Preloaded elf kernel "kernel" at 0xc03a9000. null: mem: Pentium Pro MTRR support enabled Using $PIR table, 9 entries at 0xc00f1720 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 3, range 32, base e6000000, size 25, enabled found-> vendor=0x1106, dev=0x0305, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x8305, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=4, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=4, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000d400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x16 bus=0, slot=4, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000d000, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x16 bus=0, slot=4, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=4, func=4 class=06-00-00, hdrtype=0x00, mfdev=0 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base e1800000, size 12, enabled map[14]: type 4, range 32, base 0000a400, size 6, enabled map[18]: type 1, range 32, base e1000000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000a000, size 3, enabled map[14]: type 4, range 32, base 00009800, size 2, enabled map[18]: type 4, range 32, base 00009400, size 3, enabled map[1c]: type 4, range 32, base 00009000, size 2, enabled map[20]: type 4, range 32, base 00008800, size 6, enabled map[24]: type 1, range 32, base e0800000, size 17, enabled found-> vendor=0x105a, dev=0x0d30, revid=0x02 bus=0, slot=17, func=0 class=01-80-00, hdrtype=0x00, mfdev=0 intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xe2000000-0xe3cfffff pcib1: prefetched decode 0xe3f00000-0xe5ffffff pci1: physical bus=1 map[10]: type 1, range 32, base e2000000, size 24, enabled map[14]: type 3, range 32, base e4000000, size 25, enabled found-> vendor=0x10de, dev=0x002d, revid=0x15 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 pci1: on pcib1 pci1: at 0.0 (no driver attached) isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xd800-0xd80f at device 4.1 on pci0ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe 00 00 ata0-slave: ATAPI probe 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA probe 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808 ata1: mask=01 ostat0=50 ostat2=ff ata1-master: ATAPI probe 14 eb ata1: mask=01 stat0=00 stat1=ff ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd000-0xd01f irq 5 at device 4.3 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fxp0: port 0xa400-0xa43f mem 0xe1000000-0xe10fffff,0xe1800000-0xe1800fff irq 5 at device 9.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:04:16:c4 fxp0: PCI IDs: 8086 1229 8086 000c 0008 fxp0: Chip Type: 0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached atapci1: port 0x8800-0x883f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 mem 0xe0800000-0xe081ffff irq 10 at device 17.0 on pci0 ata-: ata2 already exists, using ata3 instead ata2: iobase=0xa000 altiobase=0x9802 bmaddr=0x8800 ata2: mask=03 ostat0=50 ostat2=50 ata2-master: ATAPI probe 00 00 ata2-slave: ATAPI probe 00 00 ata2: mask=03 stat0=50 stat1=50 ata2-master: ATA probe 01 a5 ata2-slave: ATA probe 01 a5 ata2: devices=03 ata2: at 0xa000 on atapci1 ata3: iobase=0x9400 altiobase=0x9002 bmaddr=0x8808 ata3: mask=03 ostat0=7f ostat2=7f ata3-master: ATAPI probe 7f 7f ata3-slave: ATAPI probe 7f 7f ata3: mask=03 stat0=7f stat1=7f ata3-master: ATA probe 25 25 ata3-slave: ATA probe 25 25 ata3: devices=00 ata3: at 0x9400 on atapci1 ata-: ata0 already exists, using ata4 instead ata-: ata1 already exists, using ata5 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 14 devices, largest 114 bytes PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 PNP0400: adding io range 0x778-0x77f, size=0x8, align=0 PNP0400: end config pnpbios: handle 0 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: end config pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 PNP0501: end config pnpbios: handle 3 device ID PNP0501 (0105d041) PNP0f13: adding irq mask 0x1000 PNP0f13: end config pnpbios: handle 8 device ID PNP0f13 (130fd041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x2fffffff, size=0x2ff00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xd1000-0xd3fff, size=0x3000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: end config pnpbios: handle 9 device ID PNP0c01 (010cd041) PNP0000: adding irq mask 0x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0000: end config pnpbios: handle 10 device ID PNP0000 (0000d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: end config pnpbios: handle 11 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x75, size=0x6, align=0 PNP0b00: end config pnpbios: handle 12 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: end config pnpbios: handle 13 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 PNP0c04: end config pnpbios: handle 14 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 PNP0200: end config pnpbios: handle 15 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 16 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: end config pnpbios: handle 17 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0 PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0 PNP0c02: end config pnpbios: handle 18 device ID PNP0c02 (020cd041) sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: