Date: Thu, 10 Feb 2000 14:46:27 -0500 (EST) From: Steve Hovey <shovey@buffnet.net> To: "Ben C.O.Grimm" <Ben.Grimm@wirehub.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Ethernet (ed0) not working Message-ID: <Pine.BSF.4.05.10002101444590.4617-100000@buffnet11.buffnet.net> In-Reply-To: <fsv5asg9k5hpl0iivvefppsgu80mjs0ieo@louie.wirehub.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
You guys sure you dont have in IRQ conflict someplace? And that the IRQ freebsd is config'd for matches the IRQ you have your card set to? Ive seen freebsd see a card, with a mismatched IRQ if their was a device on the IRQ freebsd assumed/looked at, even though it was not the nic. On Thu, 10 Feb 2000, Ben C.O.Grimm wrote: > On Thu, 10 Feb 2000 16:39:01 +1100, Roy Soliman <soliman@tpg.com.au> > wrote: > > > I've been having some problems with my ethernet card, i'm fairly sure it > > works. I am using an ed0 device, i can ping it's ip, but i can't see > > anything in the arp tables or ping anything in the same subnet. > > /var/log/messages says ed0: device timeout. > > Any thoughts? Okay, could you put them in writing? :-) > > FWIW: I have exactly the same problem with a Realtek card running > under NE2000 mode. I had to change from 0x280 (default) to 0x300 to > get it recognized at boot-time, but after that I get device timeouts, > making it impossible to continue installing over FTP/NFS. > > -- > - Ben C. O. Grimm ----------------- Ben.Grimm@wirehub.net - > - Wirehub! Internet Engineering - http://www.wirehub.net/ - > - Wirehub! Backbone --- http://doema.wirehub.net/wirehub/ - > - Private Ponderings ------- http://libertas.wirehub.net/ - > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10002101444590.4617-100000>