From owner-freebsd-hardware Tue Aug 29 16:22:14 1995 Return-Path: hardware-owner Received: (from majordom@localhost) by freefall.FreeBSD.org (8.6.11/8.6.6) id QAA28526 for hardware-outgoing; Tue, 29 Aug 1995 16:22:14 -0700 Received: from relay3.UU.NET (relay3.UU.NET [192.48.96.8]) by freefall.FreeBSD.org (8.6.11/8.6.6) with ESMTP id QAA28520 for ; Tue, 29 Aug 1995 16:22:11 -0700 Received: from uucp6.UU.NET by relay3.UU.NET with SMTP id QQzeyf09696; Tue, 29 Aug 1995 19:22:05 -0400 Received: from uanet.UUCP by uucp6.UU.NET with UUCP/RMAIL ; Tue, 29 Aug 1995 19:22:05 -0400 Received: by crocodil.monolit.kiev.ua (8.6.8.1/8.5) id CAA25554 for hardware@freebsd.org; Wed, 30 Aug 1995 02:19:09 +0300 Date: Wed, 30 Aug 1995 02:19:09 +0300 From: System daemons Message-Id: <199508292319.CAA25554@crocodil.monolit.kiev.ua> Apparently-To: hardware@freebsd.org Sender: hardware-owner@freebsd.org Precedence: bulk [ I've sent this already, but to wrong address... second try should be ok. ] Subject: SCSI CD Hitachi 1750S + PCI NCR cannot play sound (data ok) Date: 25 Aug 1995 03:33:32 +0300 Organization: FARM Computing Association Keywords: PCI NCR SCSI CD-ROM audio I can use the drive in data mode (installed my system from it), but when I run cdplay (or any X player, it doesn't matter), I get the following diagnostics: cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2. dmesg: FreeBSD 2.0.5-RELEASE #0: Mon Aug 14 13:52:02 EET DST 1995 dk@dog.farm.org:/usr/src/sys/compile/FARM CPU: i486DX (486-class CPU) real memory = 7995392 (1952 pages) avail memory = 6729728 (1643 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <8 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 15 on isa ed0: address 00:40:33:2c:a6:13, type NE2000 (16 bit) bpf: ed0 attached sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16450 sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 at 0x278-0x27f on isa lpt2 not found at 0xffffffff pca0 on isa pca0: PC speaker audio driver fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1058400 sectors), 1050 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 npx0 on motherboard npx0: INT 16 interface Probing for devices on the pci0 bus: configuration mode 1 allows 32 devices. pci0:5: vendor=0x1039, device=0x496, class=bridge [not supported] vga0 rev 0 on pci0:11 ncr0 rev 2 int a irq 9 on pci0:13 reg20: virtual=0xf224b000 physical=0xf0800000 size=0x100 ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (V2 pl21 95/03/21) ncr0 waiting for scsi devices to settle (ncr0:2:0): "HITACHI CDR-1750S 0009" type 5 removable SCSI 1 cd0(ncr0:2:0): CD-ROM cd0(ncr0:2:0): UNIT ATTENTION asc:28,0 cd0(ncr0:2:0): Not ready to ready transition, medium may have changed cd present.[400000 x 2048 byte records] pci0: uses 8388864 bytes of memory from f0000000 upto f08000ff. pci0: uses 256 bytes of I/O space from 6000 upto 60ff. bpf: lo0 attached bpf: ppp0 attached bpf: sl0 attached cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2. cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2. cd0(ncr0:2:0): ILLEGAL REQUEST asc:20,0 Invalid command operation code cd0(ncr0:2:0): phase change 2-3 10@1e9d8 resid=2. [same for each request]