From owner-freebsd-hackers Wed Apr 24 16:32:34 1996 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id QAA10181 for hackers-outgoing; Wed, 24 Apr 1996 16:32:34 -0700 (PDT) Received: from who.cdrom.com (who.cdrom.com [204.216.27.3]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id QAA10176 Wed, 24 Apr 1996 16:32:32 -0700 (PDT) Received: from toplink1.toplink.net (toplink1.toplink.net [194.163.120.1]) by who.cdrom.com (8.6.12/8.6.11) with ESMTP id QAA05270 ; Wed, 24 Apr 1996 16:32:29 -0700 Received: (from ck@localhost) by toplink1.toplink.net (8.6.9/8.6.9) id BAA26858; Thu, 25 Apr 1996 01:31:11 +0200 From: Christian Kratzer Message-Id: <199604242331.BAA26858@toplink1.toplink.net> Subject: Going gaga over Cyclades board To: hackers@freebsd.org, isp@freebsd.org Date: Thu, 25 Apr 1996 01:31:10 +0200 (MET DST) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi Guys, we've been trying to wire up a cyclades 1400 based pccom 8 /port serial adapter under FreeBSD 2.1r. - I have compiled a kernel with the cy driver and used MAKEDEV ttyc0 ... ttyc7 to make the devices. - We have the board configured to irq 15 and d800. - The card is regcognized by the kernel on bootup. Apr 25 01:09:13 mail /kernel: cy0 irq 15 maddr 0xd8000 msize 8192 on isa - I have edited the modem part of rc.serial to initialize ttyc0 .. ttyc7 - We have 8 modems connected by DB25 connectors to the board - We use an ASUS P55 Tri Motherboard The problem is that using 'kermit -l /dev/cuac0' just hangs. No echo no nothing. Trying to exit kermit will leave it hanging around forever. We're at our wits end currently and would appreciate any pointers. Greetings Christian Kratzer -- TopLink GbR, Internet Services info@toplink.net Christian Kratzer http://www.toplink.net/ Phone: +49 7452 87174 Fax: +49 7452 87175 FreeBSD spoken here!