Date: Mon, 28 May 2001 20:33:08 -0700 From: "Eric Rosenberry" <eric@rosenberry.org> To: "Mobile@Freebsd. Org" <mobile@freebsd.org> Subject: More info on Linksys Wireless Card (WPC11) Message-ID: <GLEOKLAKEIBLAAKKFHEIKELICDAA.eric@rosenberry.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I have been trying to get a Linksys Wireless card (model WPC11) working in
FreeBSD 4.3 (Generic kernel).
It has been suggested that the wi driver should work for this card.
I made an entry in my /etc/pccard.conf file and I have got it loading the wi
driver.
When I insert the card, it detects it, loads the driver, and it can grab the
MAC address of the card. It then makes an Ethernet device that shows up in
ifconfig. However, it would seem if I try to DO anything to the card beyond
just inserting it and loading the driver that it locks my machine
(specifically trying to assign it an IP address).
I have attached my dmesg, the output of "pccardc dumpcis", my
/etc/pccard.conf, and the output of ifconfig.
My guess is that it does something *slightly* differently than other
standard Prism II cards that is causing issues. Other possibilities include
address conflicts on my machine however I have used other regular Ethernet
adaptors in it and they have worked fine.
Any help is greatly appreciated.
P.S. Is there any other debugging information that would be helpful?
Thanks!
-Eric
[-- Attachment #2 --]
# Linksys WPC11 (Intersil Chipset)
card "Instant Wireless " " Network PC CARD"
config auto "wi" ?
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
[-- Attachment #3 --]
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 74 05
PCMCIA ID = 0x101, OEM ID = 0x574
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 33
000: 04 01 33 43 6f 6d 00 4f 66 66 69 63 65 43 6f 6e
010: 6e 65 63 74 20 35 37 32 42 00 42 00 30 30 31 00
020: ff
Version = 4.1, Manuf = [3Com], card vers = [OfficeConnect 572B]
Addit. info = [B],[001]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 65 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 5.0 x 100 us
Card decodes 5 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #8, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #9, code = 0x14 (No link), length = 0
Tuple #10, code = 0x10 (Checksum), length = 5
000: aa ff 5f 00 00
Checksum from offset 65450, length 95, value is 0x0
Tuple #11, code = 0xff (Terminator), length = 0
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 67 5a 08 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = OFF
Speed = 5.0 x 100 ns, Memory block size = reserved, 32 units
Device number 2, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #3, code = 0x1d (Other conditions for attribute memory), length = 5
000: 01 67 5a 08 ff
(MWAIT)
Tuple #4, code = 0x15 (Version 1 info), length = 80
000: 05 00 49 6e 73 74 61 6e 74 20 57 69 72 65 6c 65
010: 73 73 20 00 20 4e 65 74 77 6f 72 6b 20 50 43 20
020: 43 41 52 44 00 56 65 72 73 69 6f 6e 20 30 31 2e
030: 30 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00
040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
Version = 5.0, Manuf = [Instant Wireless ], card vers = [ Network PC CARD]
Addit. info = [Version 01.02],[]
Tuple #5, code = 0x20 (Manufacturer ID), length = 4
000: 56 01 02 00
PCMCIA ID = 0x156, OEM ID = 0x2
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 40 42 0f 00
Network speed: 1 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #10, code = 0x22 (Functional EXT), length = 5
000: 02 60 ec 53 00
Network speed: 5 Mb/sec
Tuple #11, code = 0x22 (Functional EXT), length = 5
000: 02 c0 d8 a7 00
Network speed: 11 Mb/sec
Tuple #12, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 04 5a 0d 90 95
Network node ID: 00 04 5a 0d 90 95
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 05 01
Network connector: closed connector standard
Tuple #15, code = 0x1a (Configuration map), length = 7
000: 03 01 e0 03 00 00 01
Reg len = 4, config register addr = 0x3e0, last config = 0x1
Registers: X-------
Tuple #16, code = 0x1b (Configuration entry), length = 15
000: c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Minimum operating supply voltage: 4 x 1V, ext = 0x4b
Maximum operating supply voltage: 5 x 1V, ext = 0x19
Max current average over 1 second: 3 x 100mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
Card decodes 6 address lines, limited 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: NMI IOCK BERR VEND 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
[-- Attachment #4 --]
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
faith0: flags=8000<MULTICAST> mtu 1500
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ep0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.46 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::250:daff:fe52:f911%ep0 prefixlen 64 scopeid 0xa
ether 00:50:da:52:f9:11
wi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 80:eb:15:c1:80:a1
[-- Attachment #5 --]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256917504 (250896K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0
wi0: Ethernet address: 00:ec:15:c1:80:94
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 4 4 1
done
Uptime: 3m47s
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256917504 (250896K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
awi0: awi_pccard_probe: bad banner: 00 00 00 00 00 00 00 00 00 00 00 00
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 4 4 2
done
Uptime: 4m36s
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256917504 (250896K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 10 slot 0 on pccard0
wi0: Ethernet address: 00:ec:15:c1:00:95
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: xmit failed
wi0: unload
wi0: detached
pccard: card removed, slot 0
stray irq 10
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x303031f
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01f65e9
stack pointer = 0x10:0xcd04bcd4
frame pointer = 0x10:0xcd04bd18
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 258 (ifconfig)
interrupt mask =
trap number = 12
panic: page fault
syncing disks...
done
Uptime: 18m6s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256917504 (250896K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GLEOKLAKEIBLAAKKFHEIKELICDAA.eric>