Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Dec 2015 10:43:13 +0200
From:      Daniel Braniss <danny@cs.huji.ac.il>
To:        Adrian Chadd <adrian.chadd@gmail.com>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: rpi wifi/wlan0 stopped working -- Solved 
Message-ID:  <241BE9C5-8168-4A24-BC7C-930DCED737BF@cs.huji.ac.il>
In-Reply-To: <F2960E19-C98F-41FC-B558-229EAB0C7E89@cs.huji.ac.il>
References:  <2FD9A764-9F86-4DF1-B8F8-964678BFC21D@cs.huji.ac.il> <CAJ-Vmok7dtVfN8KUCf-ydWXJXg1hhnm63%2BX-494Bp9RQ-qx3wg@mail.gmail.com> <F2960E19-C98F-41FC-B558-229EAB0C7E89@cs.huji.ac.il>

next in thread | previous in thread | raw e-mail | index | archive | help

> On 25 Dec 2015, at 09:44, Daniel Braniss <danny@cs.huji.ac.il> wrote:
>=20
>>=20
>> On 24 Dec 2015, at 16:47, Adrian Chadd <adrian.chadd@gmail.com =
<mailto:adrian.chadd@gmail.com>> wrote:
>>=20
>> try 'sysctl net.wlan.devices' ; see if urtwn0 shows up.
>>=20
>> Newer -head removed the need for the hardware interface in ifconfig,
>> as it's not used.
>>=20
>=20
> ok, it shows up.
> net.wlan.hwmp.inact: 5000
> net.wlan.hwmp.rootconfint: 2000
> net.wlan.hwmp.rannint: 1000
> net.wlan.hwmp.rootint: 2000
> net.wlan.hwmp.roottimeout: 5000
> net.wlan.hwmp.net <http://net.wlan.hwmp.net/>_diameter_traversal_time: =
510
> net.wlan.hwmp.maxpreq_retries: 30
> net.wlan.hwmp.pathlifetime: 5000
> net.wlan.hwmp.targetonly: 0
> net.wlan.addba_maxtries: 3
> net.wlan.addba_backoff: 10000
> net.wlan.addba_timeout: 250
> net.wlan.recv_bar: 1
> net.wlan.mesh.maxholding: 2
> net.wlan.mesh.maxretries: 2
> net.wlan.mesh.backofftimeout: 5000
> net.wlan.mesh.confirmtimeout: 40
> net.wlan.mesh.holdingtimeout: 40
> net.wlan.mesh.retrytimeout: 40
> net.wlan.mesh.gateint: 10000
> net.wlan.cac_timeout: 60
> net.wlan.nol_timeout: 1800
> net.wlan.devices: urtwn0
>=20
> something must have changed in the startup, since I can not get wlan0 =
started.
> i have
> in /boot/loader.conf
> wlan_xauth_load=3D=E2=80=9CYES=E2=80=9D
>=20
> in /etc/rc.conf
> wlans_urtwn0=3Dwlan0
> ifconfig_wlan0=3D=E2=80=9CWPA SYNCDHCP=E2=80=9D
>=20

several (GRRRR) mergemaster later and all is ok again!
thanks,

> cheers and season greetings
> 	danny
>=20
>=20
>>=20
>> -a
>>=20
>>=20
>> On 24 December 2015 at 06:34, Daniel Braniss <danny@cs.huji.ac.il> =
wrote:
>>> with an older current, my rpi sees the wifi, and it actually works,
>>> with a more resent current, ifconfig does not show it.
>>>=20
>>> when I take out the dongle:
>>> root@:~ # ugen0.4: <Realtek> at usbus0 (disconnected)
>>> urtwn0: at uhub1, port 4, addr 4 (disconnected)
>>>=20
>>> when I re insert it:
>>>=20
>>> ugen0.4: <Realtek> at usbus0
>>> urtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on =
usbus0
>>> urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
>>>=20
>>> but:
>>>=20
>>> root@:~ # ifconfig
>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>       options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>>>       inet6 ::1 prefixlen 128
>>>       inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
>>>       inet 127.0.0.1 netmask 0xff000000
>>>       groups: lo
>>>       nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
>>> ue0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 =
mtu 1500
>>>       options=3D80001<RXCSUM,LINKSTATE>
>>>       ether b8:27:eb:8e:39:ef
>>>       media: Ethernet autoselect (none)
>>>       status: no carrier
>>>       nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>=20
>>> no wlan0, nada
>>>=20
>>> any idea what I=E2=80=99m missing?
>>>=20
>>> cheers,
>>>       danny
>>>=20
>>> _______________________________________________
>>> freebsd-arm@freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
>>> To unsubscribe, send any mail to =
"freebsd-arm-unsubscribe@freebsd.org"
>=20
> _______________________________________________
> freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm =
<https://lists.freebsd.org/mailman/listinfo/freebsd-arm>;
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org =
<mailto:freebsd-arm-unsubscribe@freebsd.org>"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?241BE9C5-8168-4A24-BC7C-930DCED737BF>