Date: Mon, 6 May 2002 08:41:12 +0200 From: "Knut Magne Huglen" <v-ger@racoo.com> To: "FreeBSD Questions" <questions@FreeBSD.ORG> Subject: 100% interupts with Broadcom BCM570x Network Interface Message-ID: <002c01c1f4c9$06e1f500$831e04a1@ihelse.net> References: <3CD59599.8050805@trini0.org> <200205060215.58159.gaspeak@sampson.gaspeak-p-va.prestige.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_002A_01C1F4D9.C6F637B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi. Hi, I have installed FreeBSD 4.5-Release on a Compaq ProLiant DL360 G2 = that has a Broadcom BCM570x PCI gigabit ethernet adapter (bge). I have configured the interface correct, and the duplex setting is also correct. I'm not able to ping a remote host. 1 out of 50 pings got a replay when trying to ping the server from a = remote host. The server has 95% to 100% interrupts as long as the Network cable is inserted. I have tried the same on a different server with the same symptoms. Anyone got a clue? PS: Have attached the dmesg V-ger ------=_NextPart_000_002A_01C1F4D9.C6F637B0 Content-Type: text/plain; name="odin2-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="odin2-dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Fri May 3 12:53:57 CEST 2002 root@:/usr/src/sys/compile/GENERIC_CPQ Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1396.44-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 = Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 1342156800 (1310700K bytes) avail memory =3D 1300389888 (1269912K bytes) Preloaded elf kernel "kernel" at 0xc049b000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem = 0xf7ef0000-0xf7ef3fff,0xf7fc0000-0xf7ffffff irq 11 at device 4.0 on pci1 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 1.80 ciss0: 2 SCSI channels ciss0: signature 'CISS' ciss0: valence 1 ciss0: supported I/O methods 0xe<simple,performant,MEMQ> ciss0: active I/O method 0x3<simple> ciss0: 4G page base 0x00000000 ciss0: interrupt coalesce delay 1000us ciss0: interrupt coalesce count 16 ciss0: max outstanding commands 1024 ciss0: bus types 0x2<ultra3> ciss0: server name '' ciss0: heartbeat 0x3000006a ciss0: 1 logical drive ciss0: logical drive 0: RAID 1, 34304MB in interim recovery mode bge0: <Broadcom BCM5701 Gigabit Ethernet> mem 0xf7fb0000-0xf7fbffff irq = 5 at device 5.0 on pci1 bge0: Ethernet address: 00:02:a5:ec:10:4b miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 100baseTX, 100baseTX-FDX ukphy1: <Generic IEEE 802.3u media interface> on miibus0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy2: <Generic IEEE 802.3u media interface> on miibus0 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy3: <Generic IEEE 802.3u media interface> on miibus0 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy4: <Generic IEEE 802.3u media interface> on miibus0 ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy5: <Generic IEEE 802.3u media interface> on miibus0 ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy6: <Generic IEEE 802.3u media interface> on miibus0 ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy7: <Generic IEEE 802.3u media interface> on miibus0 ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy8: <Generic IEEE 802.3u media interface> on miibus0 ukphy8: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy9: <Generic IEEE 802.3u media interface> on miibus0 ukphy9: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy10: <Generic IEEE 802.3u media interface> on miibus0 ukphy10: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy11: <Generic IEEE 802.3u media interface> on miibus0 ukphy11: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy12: <Generic IEEE 802.3u media interface> on miibus0 ukphy12: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy13: <Generic IEEE 802.3u media interface> on miibus0 ukphy13: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy14: <Generic IEEE 802.3u media interface> on miibus0 ukphy14: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy15: <Generic IEEE 802.3u media interface> on miibus0 ukphy15: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy16: <Generic IEEE 802.3u media interface> on miibus0 ukphy16: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy17: <Generic IEEE 802.3u media interface> on miibus0 ukphy17: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy18: <Generic IEEE 802.3u media interface> on miibus0 ukphy18: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy19: <Generic IEEE 802.3u media interface> on miibus0 ukphy19: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy20: <Generic IEEE 802.3u media interface> on miibus0 ukphy20: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy21: <Generic IEEE 802.3u media interface> on miibus0 ukphy21: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy22: <Generic IEEE 802.3u media interface> on miibus0 ukphy22: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy23: <Generic IEEE 802.3u media interface> on miibus0 ukphy23: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy24: <Generic IEEE 802.3u media interface> on miibus0 ukphy24: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy25: <Generic IEEE 802.3u media interface> on miibus0 ukphy25: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy26: <Generic IEEE 802.3u media interface> on miibus0 ukphy26: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy27: <Generic IEEE 802.3u media interface> on miibus0 ukphy27: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy28: <Generic IEEE 802.3u media interface> on miibus0 ukphy28: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy29: <Generic IEEE 802.3u media interface> on miibus0 ukphy29: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy30: <Generic IEEE 802.3u media interface> on miibus0 ukphy30: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy31: <Generic IEEE 802.3u media interface> on miibus0 ukphy31: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet> mem 0xf7fa0000-0xf7faffff irq = 10 at device 6.0 on pci1 bge1: Ethernet address: 00:02:a5:ec:10:4c miibus1: <MII bus> on bge1 ukphy32: <Generic IEEE 802.3u media interface> on miibus1 ukphy32: 100baseTX, 100baseTX-FDX ukphy33: <Generic IEEE 802.3u media interface> on miibus1 ukphy33: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy34: <Generic IEEE 802.3u media interface> on miibus1 ukphy34: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy35: <Generic IEEE 802.3u media interface> on miibus1 ukphy35: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy36: <Generic IEEE 802.3u media interface> on miibus1 ukphy36: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy37: <Generic IEEE 802.3u media interface> on miibus1 ukphy37: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy38: <Generic IEEE 802.3u media interface> on miibus1 ukphy38: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy39: <Generic IEEE 802.3u media interface> on miibus1 ukphy39: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy40: <Generic IEEE 802.3u media interface> on miibus1 ukphy40: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy41: <Generic IEEE 802.3u media interface> on miibus1 ukphy41: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy42: <Generic IEEE 802.3u media interface> on miibus1 ukphy42: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy43: <Generic IEEE 802.3u media interface> on miibus1 ukphy43: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy44: <Generic IEEE 802.3u media interface> on miibus1 ukphy44: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy45: <Generic IEEE 802.3u media interface> on miibus1 ukphy45: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy46: <Generic IEEE 802.3u media interface> on miibus1 ukphy46: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy47: <Generic IEEE 802.3u media interface> on miibus1 ukphy47: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy48: <Generic IEEE 802.3u media interface> on miibus1 ukphy48: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy49: <Generic IEEE 802.3u media interface> on miibus1 ukphy49: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy50: <Generic IEEE 802.3u media interface> on miibus1 ukphy50: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy51: <Generic IEEE 802.3u media interface> on miibus1 ukphy51: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy52: <Generic IEEE 802.3u media interface> on miibus1 ukphy52: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy53: <Generic IEEE 802.3u media interface> on miibus1 ukphy53: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy54: <Generic IEEE 802.3u media interface> on miibus1 ukphy54: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy55: <Generic IEEE 802.3u media interface> on miibus1 ukphy55: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy56: <Generic IEEE 802.3u media interface> on miibus1 ukphy56: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy57: <Generic IEEE 802.3u media interface> on miibus1 ukphy57: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy58: <Generic IEEE 802.3u media interface> on miibus1 ukphy58: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy59: <Generic IEEE 802.3u media interface> on miibus1 ukphy59: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy60: <Generic IEEE 802.3u media interface> on miibus1 ukphy60: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy61: <Generic IEEE 802.3u media interface> on miibus1 ukphy61: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy62: <Generic IEEE 802.3u media interface> on miibus1 ukphy62: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ukphy63: <Generic IEEE 802.3u media interface> on miibus1 ukphy63: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics accelerator> at 3.0 irq 7 pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xb203) at 5.0 irq 3 pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xb204) at 5.2 irq 15 isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 = on pci0 isa0: <ISA bus> on isab0 atapci0: <Generic PCI ATA controller> port = 0-0x3,0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at = device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 7 = at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib2: <ServerWorks host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib7: <ServerWorks host to PCI bridge> on motherboard pci7: <PCI bus> on pcib7 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0724 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem = 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ciss0: *** State change, logical drive 0 ciss0: logical drive 0 (probe0) changed status OK->missing physical = drive, spare status 0x0 ciss0: *** State change, logical drive 0 ciss0: logical drive 0 (probe0) changed status missing physical = drive->interim recovery, spare status 0x0 acd0: CDROM <CD-224E> at ata0-master using PIO4 Mounting root from ufs:/dev/da0s2a da0 at ciss0 bus 0 target 0 lun 0 da0: <RAID 1 interim recovery > Fixed Direct Access SCSI-0 device=20 da0: 135.168MB/s transfers da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) ciss0: *** Hot-plug drive inserted: SCSI port 2 ID 1 ciss0: *** State change, logical drive 0 ciss0: logical drive 0 (da0) changed status interim recovery->ready for = recovery, spare status 0x0 ciss0: *** State change, logical drive 0 ciss0: logical drive 0 (da0) changed status ready for = recovery->recovering, spare status 0x0 ciss0: *** State change, logical drive 0 ciss0: logical drive 0 (da0) changed status recovering->OK, spare status = 0x0 WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck ------=_NextPart_000_002A_01C1F4D9.C6F637B0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002c01c1f4c9$06e1f500$831e04a1>