Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Dec 1999 00:19:01 EST
From:      w8sdz@mail.petersen.net (Keith Petersen)
To:        toasty@dragondata.com (Kevin Day)
Cc:        bugs@FreeBSD.ORG
Subject:   Re: Poor Internet throughput on FreeBSD 3.3-RELEASE
Message-ID:  <19991230001901.w8sdz@mail.petersen.net>
In-Reply-To: Message of Wed, 29 Dec 1999 23:03:59 -0600 (CST)

next in thread | raw e-mail | index | archive | help
toasty@dragondata.com (Kevin Day) wrote:
> What type of ethernet cards are you using? Posting a 'dmesg' from both
> systems would probably help, too.

New machine:

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.3-RELEASE #0: Thu Sep 16 23:40:35 GMT 1999
    jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 268435456 (262144K bytes)
avail memory = 257646592 (251608K bytes)
Preloaded elf kernel "kernel" at 0xc0379000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
xl0: <3Com 3c905-TX Fast Etherlink XL> rev 0x00 int a irq 5 on pci0.9.0
xl0: Ethernet address: 00:60:97:9c:ed:5b
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> rev 0x01 int a irq 10 on pci0.11.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
Probing for devices on PCI bus 1:
vga0: <ATI model 475a graphics accelerator> rev 0x7a int a irq 11 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 2 lun 0
sa0: <OnStream SC-30 1.05> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 7)
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device 
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DNES-318350W SA30> Fixed Direct Access SCSI-3 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)

===

Old machine:

"GenuineIntel"  Id = 0x525  Stepping=5
  Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory  = 67108864 (65536K bytes)
avail memory = 64114688 (62612K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
de0 <Digital DC21041 Ethernet> rev 17 int a irq 10 on pci0:10
de0: DC21041 [10Mb/s] pass 1.1 Ethernet address 00:00:c0:f7:6e:d5
vga0 <Display device> rev 0 on pci0:11
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
de0: enabling 10baseT/UTP port
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "QUANTUM XP34301 1071" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4106MB (8410200 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "QUANTUM XP34301 1051" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4106MB (8410200 512 byte sectors)
(ahc0:2:0): "TOSHIBA CD-ROM XM-5401TA 3115" type 5 removable SCSI 2
cd0(ahc0:2:0): CD-ROM 
cd0(ahc0:2:0): NOT READY asc:3a,0 Medium not present
can't get the size

(ahc0:3:0): "EXABYTE EXB-82058VQANXR1 0790" type 1 removable SCSI 2
st0(ahc0:3:0): Sequential-Access density code 0x0,  drive empty
ahc0: target 4 Tagged Queuing Device
(ahc0:4:0): "FUJITSU M2954S-512 0142" type 0 fixed SCSI 2
sd2(ahc0:4:0): Direct-Access 4149MB (8498506 512 byte sectors)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
bio_imask c0000840 tty_imask c003009a net_imask c0020400

syncing disks... 4 4 1 done
FreeBSD 2.1-STABLE #0: Thu Feb  1 18:24:04 PST 1996
    root@skene.cdrom.com:/usr/src/sys/compile/SIMTEL
CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping=5
  Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory  = 67108864 (65536K bytes)
avail memory = 64114688 (62612K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
de0 <Digital DC21041 Ethernet> rev 17 int a irq 10 on pci0:10
de0: DC21041 [10Mb/s] pass 1.1 Ethernet address 00:00:c0:f7:6e:d5
vga0 <Display device> rev 0 on pci0:11
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
de0: enabling 10baseT/UTP port
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "QUANTUM XP34301 1071" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4106MB (8410200 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "QUANTUM XP34301 1051" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4106MB (8410200 512 byte sectors)
(ahc0:2:0): "TOSHIBA CD-ROM XM-5401TA 3115" type 5 removable SCSI 2
cd0(ahc0:2:0): CD-ROM 
cd0(ahc0:2:0): NOT READY asc:3a,0 Medium not present
can't get the size

(ahc0:3:0): "EXABYTE EXB-82058VQANXR1 0790" type 1 removable SCSI 2
st0(ahc0:3:0): Sequential-Access density code 0x0,  drive empty
ahc0: target 4 Tagged Queuing Device
(ahc0:4:0): "FUJITSU M2954S-512 0142" type 0 fixed SCSI 2
sd2(ahc0:4:0): Direct-Access 4149MB (8498506 512 byte sectors)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
bio_imask c0000840 tty_imask c003009a net_imask c0020400
de0: enabling 10baseT/UTP port
de0: enabling AUI port
de0: enabling 10baseT/UTP port

--Keith



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991230001901.w8sdz>