Date: Tue, 24 Apr 2001 15:00:20 -0400 (EDT) From: Todd Cohen <cohentl@clarkson.edu> To: "Kenneth D. Merry" <ken@kdm.org> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: is this device bad? Message-ID: <Pine.GSO.4.10.10104241500090.19100-100000@isis.aoc.clarkson.edu> In-Reply-To: <20010424125534.A557@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
(da0:sym0:0:0:0): READ(06). CDB: 8 1f 4e 46 2 0 (da0:sym0:0:0:0): MEDIUM ERROR info:1f4e47 asc:11,0 (da0:sym0:0:0:0): Unrecovered read error (da0:sym0:0:0:0): READ(06). CDB: 8 1f 60 10 10 0 (da0:sym0:0:0:0): MEDIUM ERROR info:1f6017 asc:11,0 (da0:sym0:0:0:0): Unrecovered read error sym0:4:control msgout: 80 6. -Todd On Tue, 24 Apr 2001, Kenneth D. Merry wrote: > On Tue, Apr 24, 2001 at 14:44:02 -0400, Todd Cohen wrote: > > I ran that command... it sat at "Fromatting..." for about 20-30 minutes or > > so.. then had the following error: > > > > lizard# camcontrol format da1 -v -w > > You are about to REMOVE ALL DATA from the following device: > > pass1: <SEAGATE ST410800N 7114> Fixed Direct Access SCSI-2 device > > pass1: Serial Number 00337771 > > pass1: 10.000MB/s transfers (10.000MHz, offset 8) > > Are you SURE you want to do this? (yes/no) yes > > Current format timeout is 10800 seconds > > Enter new timeout in seconds or press > > return to keep the current timeout [10800] > > Formatting...camcontrol: error sending format command > > CAM status is 0xb > > lizard# > > That's a command timeout, but the timeout was set to 3 hours, not 20-30 > minutes. Was there anything in the dmesg after camcontrol returned? > > Ken > -- > Kenneth Merry > ken@kdm.org > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > __________________________________________________________________________ ICMP: The protocol that goes PING! I like angles, but only to a degree. cthread. cthread_fork(). Fork, thread, fork! Black holes suck. http://wckn.clarkson.edu/~cohentl/ Real_men_don't_need_spacebars. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.10104241500090.19100-100000>