Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 21 Jan 1996 09:17:51 -0500 (EST)
From:      Peter Dufault <dufault@hda.com>
To:        jmb@freebsd.org (Jonathan M. Bresler)
Cc:        freebsd-scsi@freebsd.org
Subject:   Re: nakamichi MBR-7, some bizarre behavior
Message-ID:  <199601211417.JAA06506@hda.com>
In-Reply-To: <Pine.BSF.3.91.960121080012.2243D-100000@Aspen.Woc.Atinc.COM> from "Jonathan M. Bresler" at Jan 21, 96 08:02:09 am

next in thread | previous in thread | raw e-mail | index | archive | help
> 
> On Sun, 21 Jan 1996, Peter Dufault wrote:
> 
> > > i use an external scsi terminator (active) on the lower scsi
> > > connector of the MBR-7, i get scsi phase errors.  when the cable
> > > connects the SC-200 to the upper scsi connector on the MBR-7, the
> > > unit reponds normally.
> > 
> > Just to let you know - I used this unit for about 24 hours continuously
> > without trouble with an Adaptec 1542C and -stable.
> 
> 	did you attach to the upper or lower scsi connector on the unit?  
> (i know this is bizarre, guess i will send the report to ripley's believe 
> it or not).   the unit is rock-solid, just this one bizarre thing.  i 
> will have to place it in the middle of a scsi chain and see the results.

I don't know, since as you know they should be the same and I sent
the unit back to Helmuth.  Maybe you have a faulty unit and the lower
connector is marginal.

--

Peter Dufault               Real Time Machine Control and Simulation
HD Associates, Inc.         Voice: 508 433 6936
dufault@hda.com             Fax:   508 433 5267



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199601211417.JAA06506>