Date: Tue, 10 May 2005 14:56:06 +0200 (CEST) From: Marc Olzheim <marcolz@stack.nl> To: FreeBSD-gnats-submit@FreeBSD.org Subject: www/80857: FreeBSD/amd64 Tyan Thunder K8W (S2885) report Message-ID: <20050510125606.1735D614E@hammer.stack.nl> Resent-Message-ID: <200505101300.j4AD0JWJ046399@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 80857 >Category: www >Synopsis: FreeBSD/amd64 Tyan Thunder K8W (S2885) report >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Tue May 10 13:00:18 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Marc Olzheim >Release: FreeBSD 5.4-STABLE amd64 >Organization: M.C.G.V. Stack >Environment: System: FreeBSD hammer.stack.nl 5.4-STABLE FreeBSD 5.4-STABLE #14: Mon May 9 18:07:23 CEST 2005 root@hammer.stack.nl:/usr/obj/usr/src/sys/HAMMER amd64 >Description: Vendor: Tyan Model: K8W S2885 Chipset: AMD-8111 Issues: Fully functional Everything tested works, including sound, SATA and USB, both on 5.4-STABLE and 6.0-CURRENT. This updates Sean's entry. dmesg attached. %%% Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #14: Mon May 9 18:07:23 CEST 2005 root@hammer.stack.nl:/usr/obj/usr/src/sys/HAMMER WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 242 (1594.39-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf51 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 3674144768 (3503 MB) avail memory = 3544821760 (3380 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-27 on motherboard ioapic2 <Version 1.1> irqs 28-31 on motherboard acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci3: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xfe9f9000-0xfe9f9fff irq 19 at device 0.0 on pci3 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe9fa000-0xfe9fafff irq 19 at device 0.1 on pci3 usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci3: <display, VGA> at device 10.0 (no driver attached) atapci0: <SiI 3114 SATA150 controller> port 0xac00-0xac0f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 mem 0xfe9fbc00-0xfe9fbfff irq 17 at device 11.0 on pci3 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 ata4: channel #2 on atapci0 ata5: channel #3 on atapci0 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfe9f4000-0xfe9f7fff,0xfe9fb000-0xfe9fb7ff irq 19 at device 12.0 on pci3 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:81:00:00:30:15:d9 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:81:30:15:d9 fwe0: Ethernet address: 02:e0:81:30:15:d9 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <AMD 8111 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 7.2 (no driver attached) pci0: <bridge> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 7.5 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfd7f0000-0xfd7fffff irq 24 at device 9.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:e0:81:26:35:45 pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci1: <ACPI PCI bus> on pcib3 pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached) pcib4: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4 pci5: <ACPI PCI bus> on pcib5 acpi_button0: <Power Button> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <ISA Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad4: 156334MB <Maxtor 6Y160M0/YAR51BW0> [317632/16/63] at ata2-master SATA150 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad4s1a ... pcm0: <AMD-8111> port 0xcc00-0xcc3f,0xc800-0xc8ff irq 17 at device 7.5 on pci0 pcm0: <Analog Devices AD1981B AC97 Codec> %%% >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050510125606.1735D614E>