Date: Mon, 29 Jul 2002 09:13:04 -0400 From: Brian Minder <bmm@minder.net> To: John Chang <johnec@umich.edu> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Dell PowerEdge Message-ID: <20020729131304.GA29530@waste.minder.net> In-Reply-To: <4.3.2.7.2.20020729084900.01f30b18@j.imap.itd.umich.edu> References: <4.3.2.7.2.20020729084900.01f30b18@j.imap.itd.umich.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Jul 29, 2002 at 08:51:02AM -0400, John Chang wrote: > Anyone tried installing FreeBSD on a dell PowerEdge server? I have 4.6.1 running on the PE350 and the PE1650. dmesg's are below. The only odd thing I've noticed is that the disk on the 350 is detected as UDMA33 where it should be UDMA100. > Is there any hardware monitoring software like the ones that come with the > Dell servers if you install Redhat or Win2k? Thank you Can't speak to this. -- bmm@minder.net 1024/8C7C4DE9 PowerEdge 350: FreeBSD 4.6.1-RELEASE #0: Fri Jul 26 09:57:13 EDT 2002 root@skippy.qedinfo.com:/usr/obj/usr/src/sys/SKIPPY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1002.28-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536608768 (524032K bytes) avail memory = 517189632 (505068K bytes) Preloaded elf kernel "kernel" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00f2a80 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xef00-0xef3f mem 0xfea00000-0xfeafffff,0xfebfb000-0xfebfbfff irq 5 at device 12.0 on pci0 fxp0: Ethernet address 00:02:b3:ba:03:64 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xee80-0xeebf mem 0xfe800000-0xfe8fffff,0xfebfa000-0xfebfafff irq 5 at device 13.0 on pci0 fxp1: Ethernet address 00:02:b3:ba:03:65 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <ATI Mach64-GR graphics accelerator> at 15.0 irq 11 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. ata1-slave: ATAPI identify retries exceeded ad0: 19073MB <WDC WD200BB-18CAA0> [38752/16/63] at ata0-master UDMA33 acd0: CDROM <CD-224E> at ata1-master PIO4 PowerEdge 1650: FreeBSD 4.6.1-RELEASE #0: Fri Jul 26 09:56:35 EDT 2002 root@moscow.qedinfo.com:/usr/obj/usr/src/sys/MOSCOW Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1396.45-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 517382144 (505256K bytes) Preloaded elf kernel "kernel" at 0xc04d0000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fc220 npx0: <math processor> on motherboard npx0: INT 16 interface pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.2.7> port 0xdce0-0xdcff mem 0xfeb40000-0xfeb5ffff,0xfeb60000-0xfeb7ffff irq 7 at device 2.0 on pci1 em0: Speed:100 Mbps Duplex:Half em1: <Intel(R) PRO/1000 Network Connection, Version - 1.2.7> port 0xdcc0-0xdcdf mem 0xfeb00000-0xfeb1ffff,0xfeb20000-0xfeb3ffff irq 5 at device 4.0 on pci1 em1: Speed:N/A Duplex:N/A ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeb81000-0xfeb81fff irq 3 at device 6.0 on pci1 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xfeb80000-0xfeb80fff irq 7 at device 6.1 on pci1 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <ATI Mach64-GR graphics accelerator> at 12.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 11 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ServerWorks host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <ServerWorks host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 pcib4: <Host to PCI bridge> on motherboard pci4: <PCI bus> on pcib4 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ata0-slave: ATAPI identify retries exceeded acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle pass1 at ahc0 bus 0 target 6 lun 0 pass1: <PE/PV 1x3 SCSI BP 0.28> Fixed Processor SCSI-2 device pass1: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS10K3_18_SCA 120G> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020729131304.GA29530>