Date: Wed, 13 Apr 2016 22:32:10 +0800 From: =?UTF-8?B?5om/5oGp5b6Q?= <mashomee@gmail.com> To: Arto Pekkanen <isoa@kapsi.fi> Cc: freebsd-x11@freebsd.org Subject: Re: kloadload i915kms cause kernel core dump Message-ID: <CALGfCvCHyvS65K-z1yatOK3q97Qs%2BYjok358HUZoYBZCfVLLUA@mail.gmail.com> In-Reply-To: <570D4A62.8010705@kapsi.fi> References: <CALGfCvDtyaPC%2BKiXFw_bghcw6mcvSR_4VaxZxtw_ps0mXMDihg@mail.gmail.com> <570D4A62.8010705@kapsi.fi>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for your reply! I've already done the stuff listed in https://www.freebsd.org/doc/handbook/x-config.html. <https://www.freebsd.org/doc/handbook/x-config.html>; vgapci1@pci0:0:2:0: class=3D0x030000 card=3D0x0934152d chip=3D0x0166808= 6 > rev=3D0x09 hdr=3D0x00 > vendor =3D 'Intel Corporation' > device =3D '3rd Gen Core processor Graphics Controller' > class =3D display > subclass =3D VGA > bar [10] =3D type Memory, range 64, base 0xd3000000, size 4194304, > enabled > bar [18] =3D type Prefetchable Memory, range 64, base 0xc0000000, s= ize > 268435456, enabled > bar [20] =3D type I/O Port, range 32, base 0x5000, size 64, enabled > cap 05[90] =3D MSI supports 1 message > cap 01[d0] =3D powerspec 2 supports D0 D3 current D0 > cap 13[a4] =3D PCI Advanced Features: FLR TP > Here is my xorg.conf Section "Device" > Identifier "Card0" > Driver "vesa" > BusId "PCI:0:2:0" > EndSection > I've changed driver to "vesa", because as long as I use "intel", kernel core dumped at once because of the "i915kms" driver! I've just want know how to make intel driver works for me. Thank you. On Wed, Apr 13, 2016 at 3:20 AM, Arto Pekkanen <isoa@kapsi.fi> wrote: > This topic has been discussed already many times before, so I am just > going to link the relevant Handbook article: > https://www.freebsd.org/doc/handbook/x-config.html > > Read through the section "Setting the Video Driver in a File" > > To set the Intel=C2=AE driver in a configuration file: > > Example 5.1. Select Intel=C2=AE Video Driver in a File > /usr/local/etc/X11/xorg.conf.d/driver-intel.conf > > Section "Device" > Identifier "Card0" > Driver "intel" > # BusID "PCI:1:0:0" > EndSection > > If more than one video card is present, the BusID identifier can be > uncommented and set to select the desired card. A list of video card bus > IDs can be displayed with pciconf -lv | grep -B3 display. > > ... and in your case, you MUST set the BusID attribute or X won't be > able to figure out which device to configure. > > On 09.04.2016 09:31, =E6=89=BF=E6=81=A9=E5=BE=90 wrote: > > Hi, everyone. > > > > I'using a Hasee laptop Model:K580S-i7 D0. It has a optimus dual cards, > one > > is Intel HD4000, the other nvidia GT650M. There is no option in BIOS to > > disable optimus. > > > > I follow the link https://wiki.freebsd.org/Graphics. > > > > I've the problem enabling intel card. > > When I just use "intel" driver in xorg.conf, X won't start, compaining = no > > device detected. I can only use the "vesa" driver, this way, X starts > well, > > But I cannot switch back to console. When I pressed Alt-Shift-F1, it ju= st > > went black, no response to any key but pressing power putton for 5 > seconds. > > > > Everytime trying loading i915kms kernel module, the kernel core dumps. > > If i compiled the module into kernel or put it in /boot/loader.conf or > > /etc/rc.conf, It will core dump in next booting process. > > If I manully kldload the module, kernel will core dump right after i > press > > Enter. > > > > I don't know why and how to resolve this. > > Any help will be appreciated! Thanks. > > > > > > > > _______________________________________________ > > freebsd-x11@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-x11 > > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALGfCvCHyvS65K-z1yatOK3q97Qs%2BYjok358HUZoYBZCfVLLUA>