Date: Sun, 17 Jan 1999 13:59:53 -0800 (PST) From: Randy Bush <randy@psg.com> To: "Louis A. Mamakos" <louie@TransSys.COM> Cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: no sound with fxtv Message-ID: <m1020Eb-0008G6C@rip.psg.com> References: <m101wbU-0008G6C@rip.psg.com> <199901172129.QAA78311@whizzo.transsys.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Louie,
Thanks for the pointers.
> Can you narrow down the problem to either the sound card or the video
> capture? E.g., what if you plug some other line-level audio source into
> the sound card, or the line-out from the video into an amp?
When I plug the speaker amp into the Hauppauge's Line-Out, not even a humm.
> If this used to work
Not really. Never tried to get sound out of the Hauppauge. The mcast vat
was mike into the sound card. Hence my suspicion of the WinTV.
> did the kernel driver autodetect the right tuner and board type?
How can I tell? The tuner seems to be tuning the video part just fine.
bktr0: <BrookTree 878> rev 0x02 int a irq 10 on pci0.10.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
Probing for devices on iicbus0: <80> <81> <a0> <a1> <c2> <c3>
smbus0: <System Management Bus> on bti2c0
smb0: <SMBus general purpose I/O> on smbus0
Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner.
Probing for devices on PCI bus 1:
vga0: <Matrox model 051f graphics accelerator> rev 0x00
int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682
Comp ID: PNPb02f [0x2fb0d041]
How can I tell if the Hauppauge is a Philips FR1236 tuner? The manual is
all about how to set up Win95 aps, zero specs.
randy
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m1020Eb-0008G6C>