From owner-freebsd-questions Tue Sep 3 16:37:37 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id QAA04588 for questions-outgoing; Tue, 3 Sep 1996 16:37:37 -0700 (PDT) Received: from answerman.mindspring.com (answerman.mindspring.com [204.180.128.8]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id QAA04568 for ; Tue, 3 Sep 1996 16:37:34 -0700 (PDT) Received: from rlb.mindspring.com (user-168-121-25-139.dialup.mindspring.com [168.121.25.139]) by answerman.mindspring.com (8.6.12/8.6.12) with SMTP id TAA29714 for ; Tue, 3 Sep 1996 19:37:31 -0400 Message-ID: <322CC16D.41C67EA6@mindspring.com> Date: Tue, 03 Sep 1996 19:38:21 -0400 From: Ron Bolin X-Mailer: Mozilla 3.0 (X11; I; FreeBSD 2.1.5-RELEASE i386) MIME-Version: 1.0 To: questions@freebsd.org Subject: FreeBSD on AST Bravo 486/66d Wont run Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk I configured a Segate SCSI-II Hawk drive and an Adaptech 1542CF for a 486 system on a clone PC. It runs great on the clone. The Adaptech is set to: IRQ 10 DMA 5 5.0 MB/SEC Speed I/O Addr: 330 I moved the controller and disk to a AST Bravo 486/66d. When I boot from the disk I get the standard boot prompt. However, when I select sd(0,a)/kernel or press return or give the -c option, the SCSI bus hangs and the screen comes up iht the Adaptec 1542CF setup as though I had pressed CTLR-A. I see only a one line entry on the console about biosdev=80 irq=0, etc. Any ideas out there on how to get this AST to run FreBSD 2.1.5?? THank's Ron -- **************************************************************************** Ron Bolin rlb@mindspring.com, http://www.mindspring.com/~rlb/ GSU: matrlbx@indigo4.cs.gsu.edu Home: 770-992-8877 ****************************************************************************