Date: Fri, 23 Aug 2013 08:18:07 +0200 From: Hans Petter Selasky <hps@bitfrost.no> To: George Mitchell <george+freebsd@m5p.com> Cc: freebsd-arm@freebsd.org, freebsd-current@freebsd.org Subject: Re: ulpt can't attach Lexmark E120 Message-ID: <5216FE9F.2030608@bitfrost.no> In-Reply-To: <5216ACE5.7000500@m5p.com> References: <5105527F.3010708@m5p.com> <201301271915.47712.hselasky@c2i.net> <510570C1.1060607@m5p.com> <201301272007.30682.hselasky@c2i.net> <5105AB16.2000607@m5p.com> <5215F4DF.6000305@m5p.com> <5215F743.8060403@bitfrost.no> <5216ACE5.7000500@m5p.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 08/23/13 02:29, George Mitchell wrote: > On 08/22/13 07:34, Hans Petter Selasky wrote: > Here's the result: > > root@pi:/ # usbdump -i usbus0 -f 4 -s 65536 > 00:26:01.592494 usbus0.4 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=8,IVAL=0 > 00:26:01.593117 usbus0.4 > DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 > 00:26:01.593209 usbus0.4 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0 > 00:26:01.594146 usbus0.4 > DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 > 00:26:01.611621 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.614223 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0,ERR=0 > 00:26:01.614730 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.617595 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=20,IVAL=0,ERR=0 > 00:26:01.617758 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.620216 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.620313 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.622219 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.622326 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.624208 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.624305 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.631722 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=16,IVAL=0,ERR=0 > 00:26:01.631925 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.634217 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.634315 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.637220 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=44,IVAL=0,ERR=0 > 00:26:01.637334 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.639214 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.639312 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.641585 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=28,IVAL=0,ERR=0 > 00:26:01.641769 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.644209 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=12,IVAL=0,ERR=0 > 00:26:01.644316 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.651213 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=32,IVAL=0,ERR=0 > 00:26:01.651316 usbus0.4 SUBM-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=8,IVAL=0 > 00:26:01.653219 usbus0.4 > DONE-CTRL-EP=00000080,SPD=FULL,NFR=2,SLEN=4,IVAL=0,ERR=0 > 00:26:01.653321 usbus0.4 SUBM-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=8,IVAL=0 > 00:26:01.654584 usbus0.4 > DONE-CTRL-EP=00000000,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 > > (at which point if I type control-c to stop usbdump, the system gets a > fatal kernel mode translation fault, but that's another story.) Hope > this helps. -- George I would expect to see some messages ERR != 0 when you plug the device. Can you show both usbdump output and dmesg output which belongs together? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5216FE9F.2030608>