Date: Fri, 27 Jul 2007 14:34:56 -0300 From: "Jynx Jynx" <mrjynx2@gmail.com> To: freebsd-alpha@freebsd.org Subject: [Newbie at FreeBSD Alpha] Message-ID: <a76a86650707271034m26a57d0cl15cc67c71209f700@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Greetings to all,
I'm recently purchased a Alphaserver DS10. I'm a big FreeBSD fan from
Brazil and I finally got access to an Alpha machine. I have downloaded the
FreeBSD stable version 6.2 and tried to install it on the machine.
Everything was fine during the installation, however, when the system boot
(bringing up the FreeBSD) the kernel stops at the following lines:
*FreeBSD/alpha SRM disk boot, Revision 1.2
(**root@ds10.freebie.xs4all.nl* <root@ds10.freebie.xs4all.nl>*, Fri Jan 12
17:01:13 UTC 2007)
Memory: 524288 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x6fed50+0x39a70 syms=[0x8+0x76578+0x8+0x61c05]*
*Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc00003523b0...
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Sat Jan 13 02:32:39 UTC 2007
**root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC*<root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC>
*ST6600
COMPAQ AlphaServer DS10 617 MHz, 617MHz
8192 byte page size, 1 processor.
CPU: EV67 (21264A) major=11 minor=14
extensions=0x307<BWX,FIX,CIX,MVI,PRECISE>
OSF PAL rev: 0x1004600020158
real memory = 533979136 (509 MB)
avail memory = 512827392 (489 MB)
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413,
REGOP
S_FUNC)
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <Intel 21143 10/100BaseTX> port 0x11000-0x1107f mem 0x1581000-0x15813ff
irq
29 at device 9.0 on pci0
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:02:a5:c6:9f:e1
dc0: interrupting at TSUNAMI irq 29
dc1: <Intel 21143 10/100BaseTX> port 0x11080-0x110ff mem 0x1581400-0x15817ff
irq
30 at device 11.0 on pci0
miibus1: <MII bus> on dc1
dcphy1: <Intel 21143 NWAY media interface> on miibus1
dcphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc1: Ethernet address: 00:02:a5:c6:9f:e0
dc1: interrupting at TSUNAMI irq 30
atapci0: <AcerLabs M5229 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0
x376,0x11150-0x1115f irq 238 at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: interrupting at ISA irq 14
ata1: <ATA channel 1> on atapci0
ata1: interrupting at ISA irq 15
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x11100-0x1113f mem
0x1580000-0x1580ff
f,0x1000000-0x10fffff irq 35 at device 14.0 on pci0
miibus2: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus2
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:18:89:93
fxp0: interrupting at TSUNAMI irq 35
pcib1: <PCI-PCI bridge> at device 16.0 on pci0
pci2: <PCI bus> on pcib1
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x10000-0x1003f mem
0x1400000-0x1400ff
f,0x1200000-0x12fffff irq 43 at device 4.0 on pci2
miibus3: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus3
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:0b:cd:f4:66:b8
fxp1: interrupting at TSUNAMI irq 43
fxp2: <Intel 82559 Pro/100 Ethernet> port 0x10040-0x1007f mem
0x1401000-0x1401ff
f,0x1300000-0x13fffff irq 42 at device 5.0 on pci2
miibus4: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> on miibus4
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: Ethernet address: 00:0b:cd:f4:66:b9
fxp2: interrupting at TSUNAMI irq 42
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: interrupting at ISA irq 6
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 617283950 Hz quality 800
Timecounters tick every 0.976 msec
ad0: 38166MB <Maxtor 6E040L0 NAR61590> at ata0-master UDMA33
acd0: CDROM <HL-DT-ST CD-ROM GCR-8480B/2.11> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0a*
As I wrote, the machine is an Alphaserver DS10 with 512MB RAM, 40GB SATA
HD and IDE CDROM. The partitions were configured as default by
FreeBSD (1024MB SWAP, 512MB /, everything else default tmp, usr, var). I
really don't want to install any Linux distribution on machine, since i
think that FreeBSD is the best. As I told you, I'm completelly unfamiliar
with alpha systems and any help will be really appreciated.
Thanks in advance,
Rafael Krug
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a76a86650707271034m26a57d0cl15cc67c71209f700>