Date: Sat, 25 Feb 2012 13:34:02 +0530 From: "Desai, Kashyap" <Kashyap.Desai@lsi.com> To: "bsalinux@gmail.com" <bsalinux@gmail.com>, "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: RE: IBM M1015 support Message-ID: <B2FD678A64EAAD45B089B123FDFC3ED72B96D34A1D@inbmail01.lsi.com> In-Reply-To: <CAB3Sx6dhacfm8agN_=dYm3Vk_GZ-gyAoynUccsxqpOVZodu9XA@mail.gmail.com> References: <CAB3Sx6dhacfm8agN_=dYm3Vk_GZ-gyAoynUccsxqpOVZodu9XA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Send me your cards PCI config space detail. I generally use "lspci -vvv -s = <bus:deviceid>". It may possible that your card is part of IBM and might have different pci = <vedorid>. Pls send me card's pci details to comment further. ` Kashyap > -----Original Message----- > From: owner-freebsd-scsi@freebsd.org [mailto:owner-freebsd- > scsi@freebsd.org] On Behalf Of bsalinux@gmail.com > Sent: Saturday, February 25, 2012 1:30 PM > To: freebsd-scsi@freebsd.org > Subject: IBM M1015 support >=20 > Hello, >=20 > I'm trying to get M1015 card recognized by FreeBSD 9.0-RELEASE. I have > searched the forums but no luck. It seems that the chip LSI SAS2008 is > supported by mps driver but couldn't find any results. One of the > thread says to flash it with IT firmware but some say that IR is ok > also. >=20 > Any help would be appreciated. >=20 > Thanks. > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B2FD678A64EAAD45B089B123FDFC3ED72B96D34A1D>