Date: Mon, 9 Apr 2007 16:38:21 GMT From: Christian Gusenbauer<c47g@gmx.at> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/111419: ATA command timeout with JMicron 363 controller Message-ID: <200704091638.l39GcLs6008005@www.freebsd.org> Resent-Message-ID: <200704091650.l39Go3Id041270@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 111419
>Category: i386
>Synopsis: ATA command timeout with JMicron 363 controller
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Apr 09 16:50:02 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Christian Gusenbauer
>Release: current
>Organization:
>Environment:
FreeBSD bones.gusis.at 7.0-CURRENT FreeBSD 7.0-CURRENT #1: Mon Apr 9 11:29:17 CEST 2007 root@bones.gusis.at:/jail/mytestjail/usr/src/sys/i386/compile/BONES i386
>Description:
I'm having problems burning CDs and DVDs on FreeBSD-current with a
new ASUS P5B-E board and an Intel Core 2 Duo. The IDE DVD drive, a Plextor
PX708A is connected to the JMicron JMB363 controller.
If hw.ata.atapi_dma is set to 1, some ata commands are timing out and finally (after ~15 minutes), the DVD drive is recognized, but I can't burn CDs or DVDs with it. Reading CDs is no problem though.
If hw.ata.atapi_dma is set to 0, no ata commands time out, the drive is recognized, but burning with it doesn't work either. Reading CDs/DVDs is no problem.
I'm using /usr/sbin/burncd, which simply hangs forever. Eg. doing a "burncd -f /dev/acd0 blank", the blanking process seem to work without any problems, but after a while, the drive stops and the process hangs forever (I killed it after 2 hours).
>How-To-Repeat:
>Fix:
none
Patch attached with submission follows:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Mon Apr 9 07:41:38 CEST 2007
root@bones.gusis.at:/jail/mytestjail/usr/src/sys/i386/compile/BONES
ACPI APIC Table: <MSTEST OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2401.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147024896 (2047 MB)
avail memory = 2091536384 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI: RSDP @ 0x0xfa980/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x7ff90100/0x0054 (v 1 KOZIRO FRONTIER 0x02000707 MSFT 0x00000097)
ACPI: FACP @ 0x0x7ff90290/0x00F4 (v 3 MSTEST OEMFACP 0x02000707 MSFT 0x00000097)
ACPI: DSDT @ 0x0x7ff905c0/0x8FA9 (v 1 A0637 A0637000 0x00000000 INTL 0x20060113)
ACPI: FACS @ 0x0x7ff9e000/0x0040
ACPI: APIC @ 0x0x7ff90390/0x006C (v 1 MSTEST OEMAPIC 0x02000707 MSFT 0x00000097)
ACPI: MCFG @ 0x0x7ff90400/0x003C (v 1 MSTEST OEMMCFG 0x02000707 MSFT 0x00000097)
ACPI: SLIC @ 0x0x7ff90440/0x0176 (v 1 KOZIRO FRONTIER 0x02000707 MSFT 0x00000097)
ACPI: OEMB @ 0x0x7ff9e040/0x007B (v 1 MSTEST AMI_OEM 0x02000707 MSFT 0x00000097)
ACPI: HPET @ 0x0x7ff99570/0x0038 (v 1 MSTEST OEMHPET 0x02000707 MSFT 0x00000097)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <KOZIRO FRONTIER> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - F8, should be EC [20070320]
ACPI: SSDT @ 0x0x7ff9e0c0/0x01C6 (v 1 AMI CPU1PM 0x00000001 INTL 0x20060113)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7ff9e290/0x013A (v 1 AMI CPU2PM 0x00000001 INTL 0x20060113)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7600 GT> port 0xac00-0xac7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
uhub7: <vendor 0x0424 product 0xa700, class 9/0, rev 2.00/0.00, addr 2> on uhub6
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c900B-COMBO Etherlink XL> port 0xcc00-0xcc7f mem 0xfeaffc00-0xfeaffc7f irq 23 at device 2.0 on pci5
xl0: selecting AUI port, half duplex
xl0: Ethernet address: 00:10:5a:06:f7:9b
xl0: [ITHREAD]
pci5: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
ichsmb0: <SMBus controller> port 0x400-0x41f irq 18 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6MP> PJL,MLC,PCLXL,PCL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ucom0: <Sony Ericsson Mobile Communications M600i, class 2/0, rev 2.00/0.00, addr 2> on uhub3
ucom0: ignoring interrupt endpoint
ucom0: <Symbian Device> Sony Ericsson Mobile Communications M600i, rev 2.00/0.00, addr 2
ulpt0: <hp deskjet 5100, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-708A/1.08> at ata4-master PIO4
ad10: 238475MB <SAMSUNG SP2504C VT100-50> at ata5-master SATA300
pcm0: <HDA Codec: Analog Device (Unknown)>
pcm0: <HDA Driver Revision: 20070320_0043>
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
SMP: AP CPU #1 Launched!
cd0 at ata4 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-708A 1.08> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
GEOM_LABEL: Label for provider ad10s2 is msdosfs/D.
Trying to mount root from ufs:/dev/ad10s3a
lpt0: switched to polled extended mode
uhub7: at uhub6 port 4 (addr 2) disconnected
uhub7: detached
uhub7: <vendor 0x0424 product 0xa700, class 9/0, rev 2.00/0.00, addr 2> on uhub6
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 6 1 1 0 1 0 0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #1: Mon Apr 9 11:29:17 CEST 2007
root@bones.gusis.at:/jail/mytestjail/usr/src/sys/i386/compile/BONES
ACPI APIC Table: <MSTEST OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2401.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147024896 (2047 MB)
avail memory = 2091536384 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI: RSDP @ 0x0xfa980/0x0024 (v 2 ACPIAM)
ACPI: XSDT @ 0x0x7ff90100/0x0054 (v 1 KOZIRO FRONTIER 0x02000707 MSFT 0x00000097)
ACPI: FACP @ 0x0x7ff90290/0x00F4 (v 3 MSTEST OEMFACP 0x02000707 MSFT 0x00000097)
ACPI: DSDT @ 0x0x7ff905c0/0x8FA9 (v 1 A0637 A0637000 0x00000000 INTL 0x20060113)
ACPI: FACS @ 0x0x7ff9e000/0x0040
ACPI: APIC @ 0x0x7ff90390/0x006C (v 1 MSTEST OEMAPIC 0x02000707 MSFT 0x00000097)
ACPI: MCFG @ 0x0x7ff90400/0x003C (v 1 MSTEST OEMMCFG 0x02000707 MSFT 0x00000097)
ACPI: SLIC @ 0x0x7ff90440/0x0176 (v 1 KOZIRO FRONTIER 0x02000707 MSFT 0x00000097)
ACPI: OEMB @ 0x0x7ff9e040/0x007B (v 1 MSTEST AMI_OEM 0x02000707 MSFT 0x00000097)
ACPI: HPET @ 0x0x7ff99570/0x0038 (v 1 MSTEST OEMHPET 0x02000707 MSFT 0x00000097)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <KOZIRO FRONTIER> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - F8, should be EC [20070320]
ACPI: SSDT @ 0x0x7ff9e0c0/0x01C6 (v 1 AMI CPU1PM 0x00000001 INTL 0x20060113)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7ff9e290/0x013A (v 1 AMI CPU2PM 0x00000001 INTL 0x20060113)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7600 GT> port 0xac00-0xac7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: waiting for BIOS to give up control
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebf8000-0xfebfbfff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib4
atapci0: <JMicron JMB363 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
uhub7: <vendor 0x0424 product 0xa700, class 9/0, rev 2.00/0.00, addr 2> on uhub6
uhub7: multiple transaction translators
uhub7: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
xl0: <3Com 3c900B-COMBO Etherlink XL> port 0xcc00-0xcc7f mem 0xfeaffc00-0xfeaffc7f irq 23 at device 2.0 on pci5
xl0: selecting AUI port, half duplex
xl0: Ethernet address: 00:10:5a:06:f7:9b
xl0: [ITHREAD]
pci5: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
ichsmb0: <SMBus controller> port 0x400-0x41f irq 18 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6MP> PJL,MLC,PCLXL,PCL,POSTSCRIPT
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ucom0: <Sony Ericsson Mobile Communications M600i, class 2/0, rev 2.00/0.00, addr 2> on uhub3
ucom0: ignoring interrupt endpoint
ucom0: <Symbian Device> Sony Ericsson Mobile Communications M600i, rev 2.00/0.00, addr 2
ulpt0: <hp deskjet 5100, class 0/0, rev 2.00/1.00, addr 2> on uhub4
ulpt0: using bi-directional mode
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-708A/1.08> at ata4-master UDMA33
ad10: 238475MB <SAMSUNG SP2504C VT100-50> at ata5-master SATA300
pcm0: <HDA Codec: Analog Device (Unknown)>
pcm0: <HDA Driver Revision: 20070320_0043>
acd0: WARNING - TEST_UNIT_READY taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - REQUEST_SENSE taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
acd0: WARNING - READ_TOC taskqueue timeout - completing request directly
acd0: WARNING - READ_TOC freeing taskqueue zombie request
acd0: WARNING - READ_TOC taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - READ_TOC freeing taskqueue zombie request
acd0: WARNING - TEST_UNIT_READY taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - REQUEST_SENSE taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
acd0: WARNING - READ_TOC taskqueue timeout - completing request directly
acd0: WARNING - READ_TOC freeing taskqueue zombie request
acd0: WARNING - READ_TOC taskqueue timeout - completing request directly
acd0: FAILURE - INQUIRY timed out
acd0: WARNING - READ_TOC freeing taskqueue zombie request
SMP: AP CPU #1 Launched!
acd0: WARNING - TEST_UNIT_READY taskqueue timeout - completing request directly
acd0: FAILURE - READ_CAPACITY timed out
acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request
GEOM_LABEL: Label for provider ad10s2 is msdosfs/D.
acd0: FAILURE - READ_CAPACITY timed out
(cd0:ata4:0:0:0): got CAM status 0xb
(cd0:ata4:0:0:0): fatal error, failed to attach to device
(cd0:ata4:0:0:0): lost device
acd0: FAILURE - READ_CAPACITY timed out
acd0: FAILURE - READ_CAPACITY timed out
(cd0:ata4:0:0:0): removing device entry
Trying to mount root from ufs:/dev/ad10s3a
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200704091638.l39GcLs6008005>