Date: Fri, 1 Aug 2008 15:07:14 -0400 From: "burt rosenberg" <burt@cs.miami.edu> To: freebsd-stable@freebsd.org Subject: reboot sometimes freezes, adaptic scsi card possible problem Message-ID: <e46716cf0808011207m2ef1b24bmaf2a1c2977959c03@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On reboot, one out of 10 times, reboot (from hardware initialization) stops.
Referring to this portion of the dmesg -v output, of a successful boot,
where i have marked ">>>HERE<<<" is where the boot freezes on an
unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3
unchanged.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> CDRW drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1536KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
mfid0: <MFI Logical Disk> on mfi0
mfid0: 139392MB (285474816 sectors) RAID volume '' is optimal
GEOM: new disk mfid0
mfi0: 3796 (270874608s/0x0008/0) - Battery temperature is normal
mfi0: 3797 (270874608s/0x0008/0) - Battery started charging
mfi0: 3798 (270874608s/0x0008/0) - Current capacity of the battery is above
threshold
>>>>>>>>>>>HERE<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd1: Selection Timeout on A:0. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd1: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:0. 0 SCBs aborted
ahd1: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:1. 0 SCBs aborted
ahd1: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd1: Selection Timeout on A:12. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
I have enclose various files with my hardware profile.
[burt@mcclellan ~]$ uname -a
FreeBSD mcclellan.cs.miami.edu 6.3-RELEASE-p3 FreeBSD 6.3-RELEASE-p3 #8: Wed
Jul 30 13:02:03 EDT 2008
burt@mcclellan.cs.miami.edu:/usr/obj/usr/src/sys/MCCLELLAN
amd64
Dell PowerEdge 2950;
ahd0@pci15:3:0: class=0x010000 card=0x00409005 chip=0x80169005 rev=0x10
hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320A Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
scbus0 on ahd0 bus 0:
<SEAGATE DAT DAT72-052 A16E> at scbus0 target 6 lun 0 (sa0,pass0)
< > at scbus0 target -1 lun -1 ()
scbus1 on ahd1 bus 0:
< > at scbus1 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
Thanks.
[-- Attachment #2 --]
scbus0 on ahd0 bus 0:
<SEAGATE DAT DAT72-052 A16E> at scbus0 target 6 lun 0 (sa0,pass0)
< > at scbus0 target -1 lun -1 ()
scbus1 on ahd1 bus 0:
< > at scbus1 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
[-- Attachment #3 --]
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p3 #8: Wed Jul 30 13:02:03 EDT 2008
burt@mcclellan.cs.miami.edu:/usr/obj/usr/src/sys/MCCLELLAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff807e9000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL PE_SC3 >
Calibrating clock(s) ... i8254 clock: 1193143 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995033546 Hz
CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (1995.03-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147123200 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x00000000008e6000 - 0x000000007c35afff, 2074562560 bytes (506485 pages)
avail memory = 2064297984 (1968 MB)
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 64 at 0xfec81000
ioapic1: Changing APIC ID to 3
ioapic1: WARNING: intbase 64 != expected base 24
MADT: Found IO APIC ID 4, Interrupt 160 at 0xfec84000
ioapic2: Changing APIC ID to 4
ioapic2: WARNING: intbase 160 != expected base 88
MADT: Found IO APIC ID 5, Interrupt 224 at 0xfec84800
ioapic3: Changing APIC ID to 5
ioapic3: WARNING: intbase 224 != expected base 184
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 3
MADT: Ignoring local NMI routed to ACPI CPU 4
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 64-87 on motherboard
ioapic2 <Version 2.0> irqs 160-183 on motherboard
ioapic3 <Version 2.0> irqs 224-247 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd0 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
acpi0: <DELL PE_SC3> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.LPCC -> bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.MCHM.MCH0 -> bus 0 dev 16 func 1
AcpiOsDerivePciId: \\_SB_.PCI0.MCHD.MCH0 -> bus 0 dev 16 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12
Validation 0 11 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12
Validation 0 10 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12
Validation 0 5 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12
Validation 0 5 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12
Validation 0 10 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12
Validation 0 11 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12
Validation 0 255 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12
Validation 0 255 N 0 3 4 5 6 7 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 10 11 12
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x25c0, revid=0x12
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e2, revid=0x12
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e3, revid=0x12
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f8, revid=0x12
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e5, revid=0x12
bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f9, revid=0x12
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25e7, revid=0x12
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f0, revid=0x12
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f1, revid=0x12
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f3, revid=0x12
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f5, revid=0x12
bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25f6, revid=0x12
bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2688, revid=0x09
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000cce0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2689, revid=0x09
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000ccc0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 20
found-> vendor=0x8086, dev=0x268a, revid=0x09
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 0000cca0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 21
found-> vendor=0x8086, dev=0x268c, revid=0x09
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fc900000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x244e, revid=0xd9
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 6
pcib1: subordinate bus 11
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf2000000-0xf7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib1
pci6: physical bus=6
found-> vendor=0x8086, dev=0x3500, revid=0x01
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x350c, revid=0x01
bus=6, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib2: secondary bus 7
pcib2: subordinate bus 10
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xf4000000-0xf7ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib2
pci7: physical bus=7
found-> vendor=0x8086, dev=0x3510, revid=0x01
bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x3514, revid=0x01
bus=7, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib3: secondary bus 8
pcib3: subordinate bus 9
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf4000000-0xf7ffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci8: <ACPI PCI bus> on pcib3
pci8: physical bus=8
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=8, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf4000000-0xf7ffffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib4
pci9: physical bus=9
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f4000000, size 25, enabled
pcib4: requested memory range 0xf4000000-0xf5ffffff: good
pcib3: requested memory range 0xf4000000-0xf5ffffff: good
pcib2: requested memory range 0xf4000000-0xf5ffffff: good
pcib1: requested memory range 0xf4000000-0xf5ffffff: good
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
pcib4: slot 0 INTA is routed to irq 16
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
bce0: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf4000000
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
brgphy0: OUI 0x000818, model 0x0036, rev. 5
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: bpf attached
bce0: Ethernet address: 00:18:8b:75:1d:e0
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
bce0: [MPSAFE]
bce0: ASIC (0x57081010); Rev (B1); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01080005); Flags( MFW )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib5
pci10: physical bus=10
pcib6: <PCI-PCI bridge> at device 0.3 on pci6
pcib6: secondary bus 11
pcib6: subordinate bus 11
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib6
pci11: physical bus=11
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib7: secondary bus 1
pcib7: subordinate bus 3
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xfc600000-0xfc8fffff
pcib7: prefetched decode 0xd8000000-0xd80fffff
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib8: secondary bus 2
pcib8: subordinate bus 2
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfc700000-0xfc8fffff
pcib8: prefetched decode 0xd8000000-0xd80fffff
pci2: <ACPI PCI bus> on pcib8
pci2: physical bus=2
found-> vendor=0x1028, dev=0x0015, revid=0x00
bus=2, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x01d6, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 3, range 32, base d80f0000, size 16, enabled
pcib8: requested memory range 0xd80f0000-0xd80fffff: good
pcib7: requested memory range 0xd80f0000-0xd80fffff: good
map[18]: type 1, range 32, base fc7e0000, size 17, enabled
pcib8: requested memory range 0xfc7e0000-0xfc7fffff: good
pcib7: requested memory range 0xfc7e0000-0xfc7fffff: good
pcib8: matched entry for 2.14.INTA
pcib8: slot 14 INTA hardwired to IRQ 78
mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc7e0000-0xfc7fffff irq 78 at device 14.0 on pci2
mfi0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd80f0000
mfi0: Megaraid SAS driver Ver 2.00
mfi0: 3784 (270874485s/0x0020/0) - Shutdown command received from host
mfi0: 3785 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028)
mfi0: 3786 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.01-0088
mfi0: 3787 (4278190106s/0x0008/0) - Battery Present
mfi0: 3788 (4278190134s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255)
mfi0: 3789 (4278190134s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08(e1/s255)
mfi0: 3790 (4278190134s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, portMap=00, sasAddr=500180b040906b00,0000000000000000
mfi0: 3791 (4278190134s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0)
mfi0: 3792 (4278190134s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, portMap=01, sasAddr=50010b9000390fee,0000000000000000
mfi0: 3793 (4278190134s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1)
mfi0: 3794 (4278190134s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, portMap=02, sasAddr=50010b9000390f8e,0000000000000000
mfi0: 3795 (270874552s/0x0020/0) - Adapter ticks 270874552 elapsed 55s: Time established as 08/01/08 2:55:52; (55 seconds since power on)
ioapic1: routing intpin 14 (PCI IRQ 78) to vector 50
mfi0: [MPSAFE]
pcib9: <PCI-PCI bridge> at device 0.2 on pci1
pcib9: secondary bus 3
pcib9: subordinate bus 3
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib9
pci3: physical bus=3
pcib10: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib10: secondary bus 12
pcib10: subordinate bus 12
pcib10: I/O decode 0xf000-0xfff
pcib10: memory decode 0xfff00000-0xfffff
pcib10: prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib10
pci12: physical bus=12
pcib11: <PCI-PCI bridge> at device 5.0 on pci0
pcib11: secondary bus 13
pcib11: subordinate bus 13
pcib11: I/O decode 0xf000-0xfff
pcib11: memory decode 0xfff00000-0xfffff
pcib11: prefetched decode 0xfff00000-0xfffff
pci13: <PCI bus> on pcib11
pci13: physical bus=13
pcib12: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib12: secondary bus 14
pcib12: subordinate bus 16
pcib12: I/O decode 0xe000-0xefff
pcib12: memory decode 0xfc300000-0xfc5fffff
pcib12: prefetched decode 0xfff00000-0xfffff
pci14: <ACPI PCI bus> on pcib12
pci14: physical bus=14
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=14, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=14, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pcib13: secondary bus 15
pcib13: subordinate bus 15
pcib13: I/O decode 0xe000-0xefff
pcib13: memory decode 0xfc400000-0xfc5fffff
pcib13: prefetched decode 0xfff00000-0xfffff
pci15: <ACPI PCI bus> on pcib13
pci15: physical bus=15
found-> vendor=0x9005, dev=0x8016, revid=0x10
bus=15, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0430, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
pcib13: requested I/O range 0xec00-0xecff: in range
pcib12: requested I/O range 0xec00-0xecff: in range
map[14]: type 1, range 64, base fc4fe000, size 13, enabled
pcib13: requested memory range 0xfc4fe000-0xfc4fffff: good
pcib12: requested memory range 0xfc4fe000-0xfc4fffff: good
map[1c]: type 4, range 32, base 0000e800, size 8, enabled
pcib13: requested I/O range 0xe800-0xe8ff: in range
pcib12: requested I/O range 0xe800-0xe8ff: in range
pcib13: matched entry for 15.3.INTA
pcib13: slot 3 INTA hardwired to IRQ 160
found-> vendor=0x9005, dev=0x8016, revid=0x10
bus=15, slot=3, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0430, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 0000e400, size 8, enabled
pcib13: requested I/O range 0xe400-0xe4ff: in range
pcib12: requested I/O range 0xe400-0xe4ff: in range
map[14]: type 1, range 64, base fc4fc000, size 13, enabled
pcib13: requested memory range 0xfc4fc000-0xfc4fdfff: good
pcib12: requested memory range 0xfc4fc000-0xfc4fdfff: good
map[1c]: type 4, range 32, base 0000e000, size 8, enabled
pcib13: requested I/O range 0xe000-0xe0ff: in range
pcib12: requested I/O range 0xe000-0xe0ff: in range
pcib13: matched entry for 15.3.INTB
pcib13: slot 3 INTB hardwired to IRQ 161
ahd0: <Adaptec 39320A Ultra320 SCSI adapter> port 0xec00-0xecff,0xe800-0xe8ff mem 0xfc4fe000-0xfc4fffff irq 160 at device 3.0 on pci15
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
ahd0: Reserved 0x100 bytes for rid 0x1c type 4 at 0xe800
ahd0: Enabling 39Bit Addressing
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Disabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 697 instructions downloaded
ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x143f1
ioapic2: routing intpin 0 (PCI IRQ 160) to vector 51
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec 39320A Ultra320 SCSI adapter> port 0xe400-0xe4ff,0xe000-0xe0ff mem 0xfc4fc000-0xfc4fdfff irq 161 at device 3.1 on pci15
ahd1: Defaulting to MEMIO on
ahd1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
ahd1: Reserved 0x100 bytes for rid 0x1c type 4 at 0xe000
ahd1: Enabling 39Bit Addressing
ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
ahd1: Reading SEEPROM...done.
ahd1: STPWLEVEL is on
ahd1: Manual Primary Termination
ahd1: Manual Secondary Termination
ahd1: Primary High byte termination Disabled
ahd1: Primary Low byte termination Enabled
ahd1: Secondary High byte termination Disabled
ahd1: Secondary Low byte termination Disabled
ahd1: Downloading Sequencer Program... 697 instructions downloaded
ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x143f0
ioapic2: routing intpin 1 (PCI IRQ 161) to vector 52
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pcib14: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pcib14: secondary bus 16
pcib14: subordinate bus 16
pcib14: I/O decode 0xf000-0xfff
pcib14: memory decode 0xfff00000-0xfffff
pcib14: prefetched decode 0xfff00000-0xfffff
pci16: <ACPI PCI bus> on pcib14
pci16: physical bus=16
pcib15: <PCI-PCI bridge> at device 7.0 on pci0
pcib15: secondary bus 17
pcib15: subordinate bus 17
pcib15: I/O decode 0xf000-0xfff
pcib15: memory decode 0xfff00000-0xfffff
pcib15: prefetched decode 0xfff00000-0xfffff
pci17: <PCI bus> on pcib15
pci17: physical bus=17
pcib16: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib16: secondary bus 4
pcib16: subordinate bus 5
pcib16: I/O decode 0xf000-0xfff
pcib16: memory decode 0xf8000000-0xfbffffff
pcib16: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib16
pci4: physical bus=4
found-> vendor=0x1166, dev=0x0103, revid=0xc2
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib17: <PCI-PCI bridge> at device 0.0 on pci4
pcib17: secondary bus 5
pcib17: subordinate bus 5
pcib17: I/O decode 0xf000-0xfff
pcib17: memory decode 0xf8000000-0xfbffffff
pcib17: prefetched decode 0xfff00000-0xfffff
pci5: <PCI bus> on pcib17
pci5: physical bus=5
found-> vendor=0x14e4, dev=0x164c, revid=0x11
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x015e, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base f8000000, size 25, enabled
pcib17: requested memory range 0xf8000000-0xf9ffffff: good
pcib16: requested memory range 0xf8000000-0xf9ffffff: good
pcib16: matched entry for 4.0.INTA
pcib16: slot 0 INTA hardwired to IRQ 16
pcib17: slot 0 INTA is routed to irq 16
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
bce1: Reserved 0x2000000 bytes for rid 0x10 type 3 at 0xf8000000
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
brgphy1: OUI 0x000818, model 0x0036, rev. 5
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: bpf attached
bce1: Ethernet address: 00:18:8b:75:1d:de
bce1: [MPSAFE]
bce1: ASIC (0x57081010); Rev (B1); Bus (PCI-X, 64-bit, 133MHz); F/W (0x01080005); Flags( MFW )
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcca0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900000-0xfc9003ff irq 21 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc900000
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
pcib18: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib18: secondary bus 18
pcib18: subordinate bus 18
pcib18: I/O decode 0xd000-0xdfff
pcib18: memory decode 0xfc100000-0xfc2fffff
pcib18: prefetched decode 0xd0000000-0xd7ffffff
pcib18: Subtractively decoded bridge.
pci18: <ACPI PCI bus> on pcib18
pci18: physical bus=18
found-> vendor=0x1002, dev=0x515e, revid=0x02
bus=18, slot=13, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x01a7, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib18: requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 0000dc00, size 8, enabled
pcib18: requested I/O range 0xdc00-0xdcff: in range
map[18]: type 1, range 32, base fc1f0000, size 16, enabled
pcib18: requested memory range 0xfc1f0000-0xfc1fffff: good
pcib18: matched entry for 18.13.INTA
pcib18: slot 13 INTA hardwired to IRQ 19
pci18: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
atkbdc0 failed to probe at port 0x60 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: Justcom Technology USB KVM Switch, rev 1.10/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 132824 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 166252807 hz
Timecounter "TSC" frequency 1995033546 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
Waiting 20 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 63XXESB2 chip
acd0: setting UDMA33 on 63XXESB2 chip
acd0: <TSSTcorpCD-RW/DVD-ROM TSL462D/DE01> CDRW drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1536KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
mfid0: <MFI Logical Disk> on mfi0
mfid0: 139392MB (285474816 sectors) RAID volume '' is optimal
GEOM: new disk mfid0
mfi0: 3796 (270874608s/0x0008/0) - Battery temperature is normal
mfi0: 3797 (270874608s/0x0008/0) - Battery started charging
mfi0: 3798 (270874608s/0x0008/0) - Current capacity of the battery is above threshold
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd1: Selection Timeout on A:0. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd1: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:0. 0 SCBs aborted
ahd1: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:1. 0 SCBs aborted
ahd1: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd1: Selection Timeout on A:12. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
ahd1: Selection Timeout on A:13. 0 SCBs aborted
ahd0: Selection Timeout on A:4. 0 SCBs aborted
ahd1: Selection Timeout on A:14. 0 SCBs aborted
ahd0: Selection Timeout on A:5. 0 SCBs aborted
ahd1: Selection Timeout on A:15. 0 SCBs aborted
ahd1: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd1: Selection Timeout on A:3. 0 SCBs aborted
ahd0: Selection Timeout on A:9. 0 SCBs aborted
ahd1: Selection Timeout on A:4. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd1: Selection Timeout on A:5. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd1: Selection Timeout on A:6. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd1: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
ahd1: Selection Timeout on A:9. 0 SCBs aborted
(ahd0:A:6:0): Sending WDTR 1
(ahd0:A:6:0): Received WDTR 1 filtered to 1
ahd0: target 6 using 16bit transfers
(ahd0:A:6:0): Sending SDTR period a, offset 7f
(ahd0:A:6:0): Received SDTR period a, offset 20
Filtered to period a, offset 20
ahd0: target 6 synchronous with period = 0xa, offset = 0x20
(ahd0:A:6:0): Sending WDTR 1
(ahd0:A:6:0): Received WDTR 1 filtered to 1
ahd0: target 6 using 16bit transfers
(ahd0:A:6:0): Sending SDTR period a, offset 20
(ahd0:A:6:0): Received SDTR period a, offset 20
Filtered to period a, offset 20
ahd0: target 6 synchronous with period = 0xa, offset = 0x20
pass0 at ahd0 bus 0 target 6 lun 0
pass0: <SEAGATE DAT DAT72-052 A16E> Removable Sequential Access SCSI-3 device
pass0: Serial Number HV0DB57
pass0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
sa0 at ahd0 bus 0 target 6 lun 0
sa0: <SEAGATE DAT DAT72-052 A16E> Removable Sequential Access SCSI-3 device
sa0: Serial Number HV0DB57
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 3 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic1: Assigning PCI IRQ 78 to local APIC 1
ioapic2: Assigning PCI IRQ 160 to local APIC 0
ioapic2: Assigning PCI IRQ 161 to local APIC 1
Trying to mount root from ufs:/dev/mfid0s1a
start_init: trying /sbin/init
pid 1122 (smbd), uid 0: exited on signal 6
mfi0: 3799 (270876363s/0x0008/0) - Battery charge complete
pid 1342 (smbd), uid 0: exited on signal 6
pid 1343 (smbd), uid 0: exited on signal 6
pid 1345 (smbd), uid 0: exited on signal 6
pid 1346 (smbd), uid 0: exited on signal 6
pid 1350 (smbd), uid 0: exited on signal 6
pid 1357 (smbd), uid 0: exited on signal 6
pid 1358 (smbd), uid 0: exited on signal 6
pid 1361 (smbd), uid 0: exited on signal 6
pid 1373 (smbd), uid 0: exited on signal 6
pid 1374 (smbd), uid 0: exited on signal 6
pid 1375 (smbd), uid 0: exited on signal 6
pid 1393 (smbd), uid 0: exited on signal 6
pid 1446 (smbd), uid 0: exited on signal 6
pid 1462 (smbd), uid 0: exited on signal 6
pid 1463 (smbd), uid 0: exited on signal 6
pid 1465 (smbd), uid 0: exited on signal 6
pid 1499 (smbd), uid 0: exited on signal 6
pid 1504 (smbd), uid 0: exited on signal 6
pid 1505 (smbd), uid 0: exited on signal 6
[-- Attachment #4 --]
# dmidecode 2.9
SMBIOS 2.4 present.
62 structures occupying 3161 bytes.
Table at 0x7FFBC000.
Handle 0xDA00, DMI type 218, 11 bytes
OEM-specific Type
Header and Data:
DA 0B 00 DA B2 00 17 00 0E 20 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: 1.2.0
Release Date: 10/18/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 2.0
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: PowerEdge 2950
Version: Not Specified
Serial Number: 5H644C1
UUID: 44454C4C-4800-1036-8034-B5C04F344331
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 9 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0PR278
Version: A00
Serial Number: ..CN708216AN00AA.
Handle 0x0300, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Rack Mount Chassis
Lock: Present
Version: Not Specified
Serial Number: 5H644C1
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: Unknown
OEM Information: 0x00000000
Height: 2 U
Number Of Power Cords: Unspecified
Contained Elements: 0
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU1
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 6
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz
Voltage: 1.4 V
External Clock: 1333 MHz
Max Speed: 3600 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Socket LGA771
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: 0x0702
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable
Handle 0x0401, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU2
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: 00 00 00 00 00 00 00 00
Signature: Type 0, Family 0, Model 0, Stepping 0
Flags: None
Version: Not Specified
Voltage: 1.4 V
External Clock: Unknown
Max Speed: 3600 MHz
Current Speed: Unknown
Status: Unpopulated
Upgrade: Socket LGA771
L1 Cache Handle: 0x0703
L2 Cache Handle: 0x0704
L3 Cache Handle: 0x0705
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 4096 KB
Maximum Size: 4096 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x0702, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: Unknown
Handle 0x0703, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 0 KB
Maximum Size: 16 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: <OUT OF SPEC>
Handle 0x0704, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 0 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0705, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 0 KB
Maximum Size: 0 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: <OUT OF SPEC>
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0802, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0803, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0804, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0805, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0806, DMI type 126, 9 bytes
Inactive
Handle 0x0807, DMI type 126, 9 bytes
Inactive
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0900, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: x8 PCI Express
Current Usage: Available
Length: Long
ID: 1
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0901, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 64-bit PCI-X
Current Usage: In Use
Length: Long
ID: 2
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0902, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 64-bit PCI-X
Current Usage: Available
Length: Long
ID: 3
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0903, DMI type 126, 13 bytes
Inactive
Handle 0x0904, DMI type 126, 13 bytes
Inactive
Handle 0x0905, DMI type 126, 13 bytes
Inactive
Handle 0x0A00, DMI type 10, 10 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: Embedded ATI ES1000 Video
On Board Device 2 Information
Type: Ethernet
Status: Enabled
Description: Embedded Broadcom 5708 NIC 1
On Board Device 3 Information
Type: Ethernet
Status: Enabled
Description: Embedded Broadcom 5708 NIC 2
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: Dell System
String 2: 5[0000]
Handle 0x7E00, DMI type 126, 154 bytes
Inactive
Handle 0x0C00, DMI type 12, 5 bytes
System Configuration Options
Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults
Option 2: PASSWD: Close to enable password
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 8
Handle 0x1100, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: FB-DIMM
Set: 1
Locator: DIMM1
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 80CE80B380CE
Serial Number: 022BBB40
Asset Tag: 010642
Part Number: M395T6553CZ4-CE61
Handle 0x1101, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: FB-DIMM
Set: 1
Locator: DIMM2
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 80CE80B380CE
Serial Number: 022BBB2C
Asset Tag: 010642
Part Number: M395T6553CZ4-CE61
Handle 0x1102, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: FB-DIMM
Set: 2
Locator: DIMM3
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 80CE80B380CE
Serial Number: 022BBB5B
Asset Tag: 010642
Part Number: M395T6553CZ4-CE61
Handle 0x1103, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: FB-DIMM
Set: 2
Locator: DIMM4
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 80CE80B380CE
Serial Number: 022BBB35
Asset Tag: 010642
Part Number: M395T6553CZ4-CE61
Handle 0x1104, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: FB-DIMM
Set: 3
Locator: DIMM5
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1105, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: FB-DIMM
Set: 3
Locator: DIMM6
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1106, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: FB-DIMM
Set: 4
Locator: DIMM7
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1107, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: FB-DIMM
Set: 4
Locator: DIMM8
Bank Locator: Not Specified
Type: DDR2 FB-DIMM
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1108, DMI type 126, 28 bytes
Inactive
Handle 0x1109, DMI type 126, 28 bytes
Inactive
Handle 0x110A, DMI type 126, 28 bytes
Inactive
Handle 0x110B, DMI type 126, 28 bytes
Inactive
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x1000
Partition Width: 0
Handle 0x1301, DMI type 126, 15 bytes
Inactive
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x2600, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA8 (I/O)
Register Spacing: 32-bit Boundaries
Handle 0xD000, DMI type 208, 10 bytes
OEM-specific Type
Header and Data:
D0 0A 00 D0 02 00 FE 00 B2 01
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD400, DMI type 212, 127 bytes
OEM-specific Type
Header and Data:
D4 7F 00 D4 70 00 71 00 00 10 2D 2E 03 00 11 7F
80 04 00 11 7F 00 42 00 11 FE 01 43 00 11 FE 00
00 00 11 9F 20 00 00 11 9F 00 6E 01 11 9F 20 6D
01 11 9F 00 31 40 11 FB 00 32 40 11 FB 04 9D 00
11 FD 02 9E 00 11 FD 00 9F 00 26 FE 01 A0 00 26
FE 00 51 00 26 3F 00 52 00 26 3F 40 53 00 26 3F
80 54 00 26 3F C0 28 40 26 DF 20 29 40 26 DF 00
D6 01 26 F7 00 D7 01 26 F7 08 FF FF 00 00 00
Handle 0xD401, DMI type 212, 197 bytes
OEM-specific Type
Header and Data:
D4 C5 01 D4 70 00 71 00 03 40 5A 6D 6B 00 78 7F
80 6C 00 78 7F 00 58 00 78 FA 05 59 00 78 FA 00
5C 00 78 BF 40 5D 00 78 BF 00 04 80 78 FD 02 01
A0 78 FD 00 19 00 55 E7 00 1A 00 55 E7 08 1B 00
55 E7 10 6C 01 57 FC 00 6B 01 57 FC 01 6A 01 57
FC 02 77 01 54 FC 00 78 01 54 FC 01 79 01 54 FC
02 7A 01 54 FC 03 33 40 54 CF 00 34 40 54 CF 10
35 40 54 CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B
40 54 FB 00 1C 40 54 F7 08 1D 40 54 F7 00 43 40
58 DF 20 42 40 58 DF 00 6E 00 58 FC 01 2D 00 58
FC 02 2E 00 58 FC 00 22 40 58 EF 10 23 40 58 EF
00 BB 00 58 F3 04 BC 00 58 F3 08 BA 00 58 F3 00
FF FF 00 00 00
Handle 0xD402, DMI type 212, 47 bytes
OEM-specific Type
Header and Data:
D4 2F 02 D4 70 00 71 00 03 40 5A 6D D8 00 55 7F
80 D9 00 55 7F 00 00 C0 5C 00 0A 03 C0 67 00 05
83 00 76 00 00 84 00 77 00 00 FF FF 00 00 00
Handle 0xD403, DMI type 212, 247 bytes
OEM-specific Type
Header and Data:
D4 F7 03 D4 72 00 73 00 00 40 5D 5E 71 01 46 FB
04 72 01 46 FB 00 73 01 46 F7 08 74 01 46 F7 00
00 00 46 FE 00 00 00 46 FE 01 4A 01 46 BF 40 4B
01 46 BF 00 D3 00 00 00 02 D4 00 02 00 02 00 90
2C 00 00 01 90 2D 00 00 00 00 49 EB 14 DB 00 49
EB 00 00 00 49 FC 00 00 00 49 FC 01 00 00 49 FC
02 00 00 49 7F 00 00 00 49 7F 80 17 01 4A FE 00
18 01 4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 00
00 4A FB 00 00 00 4A FB 04 00 00 4A F7 00 00 00
4A F7 08 35 01 4B FC 00 37 01 4B FC 01 3B 01 4B
F3 04 DE 00 63 FE 01 26 40 42 FE 01 27 40 42 FE
00 00 00 47 FE 01 00 00 47 FE 00 A1 00 45 CF 20
A3 00 45 CF 10 A2 00 45 CF 00 02 40 46 DF 00 01
40 46 DF 20 95 01 7E FC 00 96 01 7E FC 01 97 01
7E FC 02 09 80 7E F3 00 0A 80 7E F3 04 0B 80 7E
F3 08 FF FF 00 00 00
Handle 0xD404, DMI type 212, 37 bytes
OEM-specific Type
Header and Data:
D4 25 04 D4 72 00 73 00 00 40 5D 5E 41 40 40 FE
01 40 40 40 FE 00 CF 01 40 FD 02 D0 01 40 FD 00
FF FF 00 00 00
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 00 00
Strings:
ATI
RN50 A20 BIOS
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE 01 04 FF FF 00 00 00 00 00 00 00 01
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
[-- Attachment #5 --]
hostb0@pci0:0:0: class=0x060000 card=0x80868086 chip=0x25c08086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000X Chipset Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:2:0: class=0x060400 card=0x00000000 chip=0x25e28086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 2'
class = bridge
subclass = PCI-PCI
pcib7@pci0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 3'
class = bridge
subclass = PCI-PCI
pcib10@pci0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 4-5'
class = bridge
subclass = PCI-PCI
pcib11@pci0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 5'
class = bridge
subclass = PCI-PCI
pcib12@pci0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x8 Port 6-7'
class = bridge
subclass = PCI-PCI
pcib15@pci0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086 rev=0x12 hdr=0x01
vendor = 'Intel Corporation'
device = '5000 Series Chipset PCIe x4 Port 7'
class = bridge
subclass = PCI-PCI
hostb1@pci0:16:0: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb2@pci0:16:1: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb3@pci0:16:2: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Error Reporting Registers'
class = bridge
subclass = HOST-PCI
hostb4@pci0:17:0: class=0x060000 card=0x80868086 chip=0x25f18086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb5@pci0:19:0: class=0x060000 card=0x80868086 chip=0x25f38086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset Reserved Registers'
class = bridge
subclass = HOST-PCI
hostb6@pci0:21:0: class=0x060000 card=0x80868086 chip=0x25f58086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
hostb7@pci0:22:0: class=0x060000 card=0x80868086 chip=0x25f68086 rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
device = '5000 Series Chipset FBD Registers'
class = bridge
subclass = HOST-PCI
pcib16@pci0:28:0: class=0x060400 card=0x01b21028 chip=0x26908086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 PCIe Root Port 1'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x01b21028 chip=0x26888086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x01b21028 chip=0x26898086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x01b21028 chip=0x268a8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0x01b21028 chip=0x268c8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib18@pci0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086 rev=0xd9 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x26708086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x01b21028 chip=0x269e8086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '631xESB/632xESB/3100 Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
pcib2@pci6:0:0: class=0x060400 card=0x00000000 chip=0x35008086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Upstream Port'
class = bridge
subclass = PCI-PCI
pcib6@pci6:0:3: class=0x060400 card=0x00000000 chip=0x350c8086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe to PCI-X Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci7:0:0: class=0x060400 card=0x00000000 chip=0x35108086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E1'
class = bridge
subclass = PCI-PCI
pcib5@pci7:1:0: class=0x060400 card=0x00000000 chip=0x35148086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '631xESB/632xESB PCIe Downstream Port E2'
class = bridge
subclass = PCI-PCI
pcib4@pci8:0:0: class=0x060400 card=0x00000000 chip=0x01031166 rev=0xc2 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5715 Broadcom dual gigabit, pci bridge'
class = bridge
subclass = PCI-PCI
bce0@pci9:0:0: class=0x020000 card=0x01b21028 chip=0x164c14e4 rev=0x11 hdr=0x00
vendor = 'Broadcom Corporation'
device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
class = network
subclass = ethernet
pcib8@pci1:0:0: class=0x060400 card=0x00000000 chip=0x03708086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-A PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib9@pci1:0:2: class=0x060400 card=0x00000000 chip=0x03728086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '80333 Segment-B PCI Express-to-PCI Express Bridge'
class = bridge
subclass = PCI-PCI
mfi0@pci2:14:0: class=0x010400 card=0x1f031028 chip=0x00151028 rev=0x00 hdr=0x00
vendor = 'Dell Computer Corporation'
device = 'PERC 5/i RAID Controller Integrated RAID controller'
class = mass storage
subclass = RAID
pcib13@pci14:0:0: class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge A'
class = bridge
subclass = PCI-PCI
pcib14@pci14:0:2: class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge B'
class = bridge
subclass = PCI-PCI
ahd0@pci15:3:0: class=0x010000 card=0x00409005 chip=0x80169005 rev=0x10 hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320A Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
ahd1@pci15:3:1: class=0x010000 card=0x00409005 chip=0x80169005 rev=0x10 hdr=0x00
vendor = 'Adaptec Inc'
device = 'ASC-39320A Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
pcib17@pci4:0:0: class=0x060400 card=0x00000000 chip=0x01031166 rev=0xc2 hdr=0x01
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'BCM5715 Broadcom dual gigabit, pci bridge'
class = bridge
subclass = PCI-PCI
bce1@pci5:0:0: class=0x020000 card=0x01b21028 chip=0x164c14e4 rev=0x11 hdr=0x00
vendor = 'Broadcom Corporation'
device = '5708C Broadcom NetXtreme II Gigabit Ethernet Adapter'
class = network
subclass = ethernet
none0@pci18:13:0: class=0x030000 card=0x01b21028 chip=0x515e1002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon ES1000 Radeon ES1000'
class = display
subclass = VGA
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e46716cf0808011207m2ef1b24bmaf2a1c2977959c03>