Date: Fri, 30 May 2008 11:09:37 +0200 From: Dimitry Andric <dimitry@andric.com> To: Pyun YongHyeon <pyunyh@gmail.com> Cc: =?ISO-8859-1?Q?Gerrit_K=FChn?= <gerrit@pmp.uni-hannover.de>, freebsd-stable@freebsd.org Subject: Re: broken re(4) Message-ID: <483FC451.7060506@andric.com> In-Reply-To: <20080530050308.GJ64177@cdnetworks.co.kr> References: <20080527165232.2acbb00f.gerrit@pmp.uni-hannover.de> <20080528002823.GA63696@cdnetworks.co.kr> <20080528175610.0ffe4c1c.gerrit@pmp.uni-hannover.de> <20080529115825.2da70cba.gerrit@pmp.uni-hannover.de> <483E8F38.6070109@andric.com> <20080530050308.GJ64177@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2008-05-30 07:03, Pyun YongHyeon wrote:
> Since you're running this patch would you post dmesg output related
> with re(4)? Also please post the output of "devinfo -rv | grep
> oui".
dmesg
----------------------------------------------------------------------
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #2: Thu May 29 13:00:50 CEST 2008
dim@vfbsd7.home.andric.com:/usr/obj/usr/src/sys/TENSOR
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA Esther processor 1200MHz (1200.01-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x6a9 Stepping = 9
Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x181<SSE3,EST,TM2>
VIA Padlock Features=0x3fcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA>
real memory = 518914048 (494 MB)
avail memory = 498270208 (475 MB)
ACPI APIC Table: <CN700 AWRDACPI>
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <CN700 AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ede0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xf4000000-0xf7ffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0
re0: Chip rev. 0x18000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:30:18:a6:f1:a8
re0: [FILTER]
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0
re1: Chip rev. 0x18000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 00:30:18:a6:f1:a9
re1: [FILTER]
atapci0: <VIA 6420 SATA150 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f,0xf400-0xf4ff irq 20 at device 15.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffd000-0xfdffd0ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1200007233 Hz quality 800
Timecounters tick every 1.000 msec
ad4: 114473MB <WDC WD1200BEVS-00LAT0 01.06M01> at ata2-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
----------------------------------------------------------------------
devinfo -rv
----------------------------------------------------------------------
nexus0
acpi0
Interrupt request lines:
9
I/O ports:
0x10-0x1f
0x22-0x3f
0x44-0x5f
0x62-0x63
0x65-0x6f
0x74-0x7f
0x91-0x93
0xa2-0xbf
0xe0-0xef
0x290-0x297
0x400-0x47f
0x4d0-0x4d1
0x500-0x50f
0x800-0x805
I/O memory addresses:
0xf0000-0xf3fff
0xf4000-0xf7fff
0xf8000-0xfbfff
0xfc000-0xfffff
0x1eee0000-0x1eefffff
0xfec00000-0xfecfffff
0xfee00000-0xfeefffff
0xfff80000-0xfffeffff
0xffff0000-0xffffffff
cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0
ACPI I/O ports:
0x414
0x415
acpi_throttle0
est0
p4tcc0
acpi_perf0
cpufreq0
acpi_button0 pnpinfo _HID=PNP0C0C _UID=0 at handle=\_SB_.PWRB
acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=0 at handle=\_SB_.MEM_
pcib0 pnpinfo _HID=PNP0A03 _UID=1 at handle=\_SB_.PCI0
pci0
hostb0 pnpinfo vendor=0x1106 device=0x0314 subvendor=0x1106 subdevice=0x0314 class=0x060000 at slot=0 function=0
I/O memory addresses:
0xe8000000-0xefffffff
agp0
hostb1 pnpinfo vendor=0x1106 device=0x1314 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=1
hostb2 pnpinfo vendor=0x1106 device=0x2314 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=2
hostb3 pnpinfo vendor=0x1106 device=0x3208 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=3
hostb4 pnpinfo vendor=0x1106 device=0x4314 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=4
hostb5 pnpinfo vendor=0x1106 device=0x7314 subvendor=0x0000 subdevice=0x0000 class=0x060000 at slot=0 function=7
pcib1 pnpinfo vendor=0x1106 device=0xb198 subvendor=0x0000 subdevice=0x0000 class=0x060400 at slot=1 function=0
pci1
vgapci0 pnpinfo vendor=0x1106 device=0x3344 subvendor=0x1106 subdevice=0x3344 class=0x030000 at slot=0 function=0
I/O memory addresses:
0xf4000000-0xf7ffffff
0xfb000000-0xfbffffff
drm0
re0 pnpinfo vendor=0x10ec device=0x8167 subvendor=0x16f3 subdevice=0x10ec class=0x020000 at slot=9 function=0
Interrupt request lines:
18
I/O ports:
0xf000-0xf0ff
I/O memory addresses:
0xfdfff000-0xfdfff0ff
miibus0
rgephy0 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
re1 pnpinfo vendor=0x10ec device=0x8167 subvendor=0x16f3 subdevice=0x10ec class=0x020000 at slot=11 function=0
Interrupt request lines:
19
I/O ports:
0xf200-0xf2ff
I/O memory addresses:
0xfdffe000-0xfdffe0ff
miibus1
rgephy1 pnpinfo oui=0x732 model=0x11 rev=0x2 at phyno=1
atapci0 pnpinfo vendor=0x1106 device=0x3149 subvendor=0x1106 subdevice=0x3149 class=0x01018f at slot=15 function=0 handle=\_SB_.PCI0.SATA
Interrupt request lines:
20
I/O ports:
0xf400-0xf4ff
0xfb00-0xfb0f
0xfc00-0xfc03
0xfd00-0xfd07
0xfe00-0xfe03
0xff00-0xff07
ata2
ad4
subdisk4
ata3
atapci1 pnpinfo vendor=0x1106 device=0x0571 subvendor=0x1106 subdevice=0x0571 class=0x01018a at slot=15 function=1 handle=\_SB_.PCI0.PATA
I/O ports:
0x170-0x177
0x1f0-0x1f7
0x376
0x3f6
0xfa00-0xfa0f
ata0
Interrupt request lines:
14
ata1
Interrupt request lines:
15
uhci0 pnpinfo vendor=0x1106 device=0x3038 subvendor=0x1106 subdevice=0x3038 class=0x0c0300 at slot=16 function=0 handle=\_SB_.PCI0.USB3
Interrupt request lines:
21
I/O ports:
0xf900-0xf91f
usb0
uhub0
uhci1 pnpinfo vendor=0x1106 device=0x3038 subvendor=0x1106 subdevice=0x3038 class=0x0c0300 at slot=16 function=1 handle=\_SB_.PCI0.USB4
I/O ports:
0xf800-0xf81f
usb1
uhub1
uhci2 pnpinfo vendor=0x1106 device=0x3038 subvendor=0x1106 subdevice=0x3038 class=0x0c0300 at slot=16 function=2 handle=\_SB_.PCI0.USB5
I/O ports:
0xf700-0xf71f
usb2
uhub2
uhci3 pnpinfo vendor=0x1106 device=0x3038 subvendor=0x1106 subdevice=0x3038 class=0x0c0300 at slot=16 function=3 handle=\_SB_.PCI0.USB6
I/O ports:
0xf600-0xf61f
usb3
uhub3
ehci0 pnpinfo vendor=0x1106 device=0x3104 subvendor=0x1106 subdevice=0x3104 class=0x0c0320 at slot=16 function=4 handle=\_SB_.PCI0.USB7
I/O memory addresses:
0xfdffd000-0xfdffd0ff
usb4
uhub4
isab0 pnpinfo vendor=0x1106 device=0x3227 subvendor=0x1106 subdevice=0x3227 class=0x060100 at slot=17 function=0 handle=\_SB_.PCI0.VT86
isa0
adv0
aha0
aic0
atkbdc0
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
1
psm0
bt0
cs0
ed0
fdc0
I/O ports:
0x3f7
fe0
ie0
le0
sc0
sio2
sio3
sn0
vga0
I/O ports:
0x3c0-0x3df
I/O memory addresses:
0xa0000-0xbffff
vt0
orm0 pnpinfo pnpid=ORM0000
I/O memory addresses:
0xc0000-0xcffff
pmtimer0
unknown pnpinfo vendor=0x1106 device=0x3059 subvendor=0x16f3 subdevice=0x4765 class=0x040100 at slot=17 function=5 handle=\_SB_.PCI0.AC97
I/O ports:
0xee00-0xeeff
acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=2 at handle=\_SB_.PCI0.PMIO
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN0.DRV1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.IDE0.CHN1.DRV1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN0.DRV0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN0.DRV1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN1.DRV0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.PATA.CHN1.DRV1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB0
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB1
unknown pnpinfo _HID=none _UID=0 at handle=\_SB_.PCI0.USB2
pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.PCI0.LNKA
pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.PCI0.LNKB
pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.PCI0.LNKC
pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.PCI0.LNKD
pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.PCI0.LNKE
pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.PCI0.LNKF
pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.PCI0.LNK0
pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.PCI0.LNK1
pci_link8 pnpinfo _HID=PNP0C0F _UID=9 at handle=\_SB_.PCI0.ALKA
pci_link9 pnpinfo _HID=PNP0C0F _UID=10 at handle=\_SB_.PCI0.ALKB
pci_link10 pnpinfo _HID=PNP0C0F _UID=11 at handle=\_SB_.PCI0.ALKC
pci_link11 pnpinfo _HID=PNP0C0F _UID=12 at handle=\_SB_.PCI0.ALKD
acpi_sysresource2 pnpinfo _HID=PNP0C02 _UID=1 at handle=\_SB_.PCI0.SYSR
atpic0 pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.PIC_
atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.DMA1
attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.TMR_
attimer1 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.RTC_
unknown pnpinfo _HID=PNP0800 _UID=0 at handle=\_SB_.PCI0.SPKR
npxisa0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.COPR
sio0 pnpinfo _HID=PNP0501 _UID=1 at handle=\_SB_.PCI0.UAR1
Interrupt request lines:
4
I/O ports:
0x3f8-0x3ff
sio1 pnpinfo _HID=PNP0501 _UID=2 at handle=\_SB_.PCI0.UAR2
Interrupt request lines:
3
I/O ports:
0x2f8-0x2ff
unknown pnpinfo _HID=PNP0510 _UID=0 at handle=\_SB_.PCI0.IRDA
ppc0 pnpinfo _HID=PNP0400 _UID=1 at handle=\_SB_.PCI0.LPT1
Interrupt request lines:
7
I/O ports:
0x378-0x37f
ppbus0
plip0
lpt0
ppi0
unknown pnpinfo _HID=PNP0401 _UID=1 at handle=\_SB_.PCI0.ECP1
unknown pnpinfo _HID=PNP0F13 _UID=0 at handle=\_SB_.PCI0.PS2M
unknown pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.PS2K
unknown pnpinfo _HID=PNP0C02 _UID=3 at handle=\_SB_.PCI0.PSMR
unknown pnpinfo _HID=PNP0C0B _UID=0 at handle=\_TZ_.FAN_
acpi_tz0 pnpinfo _HID=none _UID=0 at handle=\_TZ_.THRM
acpi_timer0 pnpinfo unknown at unknown
ACPI I/O ports:
0x408-0x40b
apic0
legacy0
ram0
I/O memory addresses:
0x0-0x9efff
0x100000-0x1eedffff
npx0
----------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?483FC451.7060506>