Date: Sat, 15 Jan 2022 09:04:48 +0100 From: Sergio Carlavilla <carlavilla@freebsd.org> To: Crystal Kolipe <kolipe.c@exoticsilicon.com> Cc: freebsd-hardware@freebsd.org Subject: Re: FreeBSD 13.0-STABLE on Pinephone Message-ID: <CAFwocyOADL=_hXfVU0gQP_4ctAm4mRsxbis9f1_j-QGp_b2ySg@mail.gmail.com> In-Reply-To: <YeITh%2B7HRFWsaVyF@exoticsilicon.com> References: <YeITh%2B7HRFWsaVyF@exoticsilicon.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--00000000000030f9b005d59a60b1 Content-Type: text/plain; charset="UTF-8" On Sat, 15 Jan 2022 at 01:21, Crystal Kolipe <kolipe.c@exoticsilicon.com> wrote: > Hi, > > I installed FreeBSD 13.0-STABLE on a Pinephone 1.2 for testing, and > thought that the dmesg output would be of interest to the list: > > ---<<BOOT>>--- > WARNING: Cannot find freebsd,dts-version property, cannot check DTB > compliance > Copyright (c) 1992-2021 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 13.0-STABLE #0 stable/13-n248759-3684bb89d52: Thu Dec 30 03:49:13 > UTC 2021 > root@releng3.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC > arm64 > FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git > llvmorg-13.0.0-0-gd7b669b3a303) > VT: init without driver. > module firmware already present! > real memory = 3221004288 (3071 MB) > avail memory = 3118305280 (2973 MB) > Starting CPU 1 (1) > Starting CPU 2 (2) > Starting CPU 3 (3) > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > random: unblocking device. > random: entropy device external interface > MAP f8f2b000 mode 2 pages 4 > MAP f8f30000 mode 2 pages 4 > MAP fdf60000 mode 2 pages 16 > kbd0 at kbdmux0 > ofwbus0: <Open Firmware Device Tree> > clk_fixed0: <Fixed clock> on ofwbus0 > clk_fixed1: <Fixed clock> on ofwbus0 > simplebus0: <Flattened device tree simple bus> on ofwbus0 > regfix0: <Fixed Regulator> on ofwbus0 > regfix1: <Fixed Regulator> on ofwbus0 > psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 58,59 on simplebus0 > rtc0: registered as a time-of-day clock, resolution 1.000000s > ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff > on simplebus0 > ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem > 0x1f01400-0x1f014ff on simplebus0 > gic0: <ARM Generic Interrupt Controller> mem > 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff > irq 53 on simplebus0 > gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224 > aw_r_intc_gicp0: <Allwinner R INTC> mem 0x1f00c00-0x1f00fff irq 60 on > simplebus0 > gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq > 24,25,26 on simplebus0 > gpiobus0: <OFW GPIO bus> on gpio0 > iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2afff > irq 40 on simplebus0 > iicbus0: <OFW I2C bus> on iichb0 > iichb1: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b000-0x1c2b3ff > irq 41 on simplebus0 > iicbus1: <OFW I2C bus> on iichb1 > iichb2: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b400-0x1c2b7ff > irq 42 on simplebus0 > iicbus2: <OFW I2C bus> on iichb2 > gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 63 > on simplebus0 > gpiobus1: <OFW GPIO bus> on gpio1 > generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0 > Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 > Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 > a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 8,9 on simplebus0 > Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000 > aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0 > rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1 > rtc1: Error when reading reg 0x02, rv: 3 > rtc1: Failed to configure RTC > device_attach: rtc1 attach returned 5 > rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1 > rtc1: Error when reading reg 0x02, rv: 3 > rtc1: Failed to configure RTC > device_attach: rtc1 attach returned 5 > aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on > simplebus0 > rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1 > rtc1: Error when reading reg 0x02, rv: 3 > rtc1: Failed to configure RTC > device_attach: rtc1 attach returned 5 > mmc_pwrseq0: <MMC Simple Power sequence> on ofwbus0 > awusbphy0: <Allwinner USB PHY> mem > 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0 > rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1 > rtc1: Error when reading reg 0x02, rv: 3 > rtc1: Failed to configure RTC > device_attach: rtc1 attach returned 5 > iichb3: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 64 on simplebus0 > iicbus3: <OFW I2C bus> on iichb3 > axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 70 > on iicbus3 > axp8xx_pmu0: cannot allocate resources for device > device_attach: axp8xx_pmu0 attach returned 6 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > cpufreq_dt0: <Generic cpufreq driver> on cpu0 > cpufreq_dt0: no regulator for cpu@0 > device_attach: cpufreq_dt0 attach returned 6 > cpu1: <Open Firmware CPU> on cpulist0 > cpufreq_dt1: <Generic cpufreq driver> on cpu1 > cpufreq_dt1: no regulator for cpu@1 > device_attach: cpufreq_dt1 attach returned 6 > cpu2: <Open Firmware CPU> on cpulist0 > cpufreq_dt2: <Generic cpufreq driver> on cpu2 > cpufreq_dt2: no regulator for cpu@2 > device_attach: cpufreq_dt2 attach returned 6 > cpu3: <Open Firmware CPU> on cpulist0 > cpufreq_dt3: <Generic cpufreq driver> on cpu3 > cpufreq_dt3: no regulator for cpu@3 > device_attach: cpufreq_dt3 attach returned 6 > pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0 > a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 10 on > simplebus0 > aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff > irq 14 on simplebus0 > aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff > irq 15 on simplebus0 > aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff > irq 16 on simplebus0 > musbotg0: <Allwinner USB DRD> mem 0x1c19000-0x1c193ff irq 19 on simplebus0 > musbotg0: setting phy mode 3 > usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM > usbus0 on musbotg0 > ehci0: <Generic EHCI Controller> mem 0x1c1a000-0x1c1a0ff irq 20 on > simplebus0 > usbus1: EHCI version 1.0 > usbus1 on ehci0 > ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 21 on > simplebus0 > usbus2 on ohci0 > ehci1: <Generic EHCI Controller> mem 0x1c1b000-0x1c1b0ff irq 22 on > simplebus0 > usbus3: EHCI version 1.0 > usbus3 on ehci1 > ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 23 on > simplebus0 > usbus4 on ohci1 > gpioc0: <GPIO controller> on gpio0 > aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff > irq 34 on simplebus0 > uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 35 on > simplebus0uart0: console (115384,n,8,1) > uart1: <16750 or compatible> mem 0x1c28400-0x1c287ff irq 36 on simplebus0 > uart2: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 38 on simplebus0 > iicbus0: <unknown card> at addr 0xba > iic0: <I2C generic I/O> on iicbus0 > iicbus1: <unknown card> at addr 0x3c > iicbus1: <unknown card> at addr 0x90 > rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1 > rtc1: Error when reading reg 0x02, rv: 3 > rtc1: Failed to configure RTC > device_attach: rtc1 attach returned 5 > iic1: <I2C generic I/O> on iicbus1 > iic2: <I2C generic I/O> on iicbus2 > pwm0: <Allwinner PWM> mem 0x1f03800-0x1f03bff on simplebus0 > pwmbus0: <OFW PWM bus> on pwm0 > pwmc0: <PWM Control> channel 0 on pwmbus0 > gpioc1: <GPIO controller> on gpio1 > axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 70 > on iicbus3 > axp8xx_pmu0: cannot allocate resources for device > device_attach: axp8xx_pmu0 attach returned 6 > iic3: <I2C generic I/O> on iicbus3 > aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 65 on > simplebus0 > gpioled0: <GPIO LEDs> on ofwbus0 > armv8crypto0: <AES-CBC,AES-XTS,AES-GCM> > cpufreq_dt0: <Generic cpufreq driver> on cpu0 > cpufreq_dt0: no regulator for cpu@0 > device_attach: cpufreq_dt0 attach returned 6 > cpufreq_dt1: <Generic cpufreq driver> on cpu1 > cpufreq_dt1: no regulator for cpu@1 > device_attach: cpufreq_dt1 attach returned 6 > cpufreq_dt2: <Generic cpufreq driver> on cpu2 > cpufreq_dt2: no regulator for cpu@2 > device_attach: cpufreq_dt2 attach returned 6 > cpufreq_dt3: <Generic cpufreq driver> on cpu3 > cpufreq_dt3: no regulator for cpu@3 > device_attach: cpufreq_dt3 attach returned 6 > Timecounters tick every 1.000 msec > CPU 0: ARM Cortex-A53 r0p4 affinity: 0 > Cache Type = <64 byte D-cacheline,64 byte > I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> > Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> > Instruction Set Attributes 1 = <> > Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > Processor Features 1 = <> > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit > ASID,1TB PA> > Memory Model Features 1 = <8bit VMID> > Memory Model Features 2 = <32bit CCIDX,48bit VA> > Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 > Breakpoints,PMUv3,Debugv8> > Debug Features 1 = <> > Auxiliary Features 0 = <> > Auxiliary Features 1 = <> > AArch32 Instruction Set Attributes 5 = <CRC32,SHA2,SHA1,AES+VMULL,SEVL> > AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP > VFPv3+v4,AdvSIMD> > AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP > Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ> > CPU 1: ARM Cortex-A53 r0p4 affinity: 1 > CPU 2: ARM Cortex-A53 r0p4 affinity: 2 > CPU 3: ARM Cortex-A53 r0p4 affinity: 3 > Release APs...done > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > Trying to mount root from ufs:/dev/ufs/rootfs [rw]... > ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0 > Root mount waiting for:uhub0ugen2.1: <Generic OHCI root HUB> at usbus2 > ugen1.1: <Generic EHCI root HUB> at usbus1 > on usbus0 > uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on > usbus0 > usbus0uhub1 on usbus2 > usbus1uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on > usbus2 > usbus2ugen3.1: <Generic EHCI root HUB> at usbus3 > usbus3uhub2 usbus4 on usbus1 > > uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > uhub3 on usbus3 > uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen4.1: <Generic OHCI root HUB> at usbus4 > uhub4 on usbus4 > uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > uhub1: 1 port with 1 removable, self powered > uhub4: 1 port with 1 removable, self powered > uhub0: 1 port with 1 removable, self powered > mmc0: <MMC/SD bus> on aw_mmc2 > mmc0: Failed to set VCCQ for card at relative address 2 > mmcsd0: 31GB <MMCHC DA4032 0.1 SN FF342515 MFG 06/2020 by 69 0x0000> at > mmc0 52.0MHz/8bit/4096-block > mmcsd0boot0: 4MB partition 1 at mmcsd0 > mmcsd0boot1: 4MB partition 2 at mmcsd0 > mmcsd0rpmb: 17MB partition 3 at mmcsd0 > mmc1: <MMC/SD bus> on aw_mmc1 > mmc1: No compatible cards found on bus > aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004 > > uhub2: 1 port with 1 removable, self powered > uhub3: 1 port with 1 removable, self powered > mountroot: waiting for device /dev/ufs/rootfs... > Dual Console: Serial Primary, Video Secondary > Setting hostuuid: 30633239-6439-6162-3062-303436373435. > Setting hostid: 0x09ffad61. > /etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5). > Starting file system checks: > /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS > /dev/ufs/rootfs: clean, 6670786 free (26 frags, 833845 blocks, 0.0% > fragmentation) > Mounting local filesystems:. > Setting hostname: generic. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > Setting up harvesting: > [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED > Feeding entropy: . > Autoloading module: pwm_backlight > warning: KLD '/boot/kernel/backlight.ko' is newer than the linker.hints > file > pwm_backlight0: <PWM Backlight> on ofwbus0 > pwm_backlight0: No power-supply property > device_attach: pwm_backlight0 attach returned 6 > lo0: link state changed to UP > Starting Network: lo0. > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > groups: lo > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > Starting devd. > add host 127.0.0.1: gateway lo0 fib 0: route already in table > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > Updating /var/run/os-release done. > Creating and/or trimming log files. > Clearing /tmp (X related). > Updating motd:. > Starting syslogd. > Mounting late filesystems:. > Performing sanity check on sshd configuration. > Starting sshd. > Starting cron. > Starting background file system checks in 60 seconds. > > Fri Jan 1 00:04:48 UTC 2010 > > FreeBSD/arm64 (generic) (ttyu0) > > login: root > Password: > Jan 1 00:04:50 generic login[835]: ROOT LOGIN (root) ON ttyu0 > > Hi, Nice! Can you please share with us what components are working? For example, wi-fi works? Works the baseband router? Can you connect to cellular network? And, it would be amazing if you share with us the steps to make the installation :) Bye! --00000000000030f9b005d59a60b1 Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable <div>On Sat, 15 Jan 2022 at 01:21, Crystal Kolipe <<a href=3D"mailto:kol= ipe.c@exoticsilicon.com">kolipe.c@exoticsilicon.com</a>> wrote:<br></div= ><div><div class=3D"gmail_quote"><blockquote class=3D"gmail_quote" style=3D= "margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;pad= ding-left:1ex;border-left-color:rgb(204,204,204)">Hi,<br> <br> I installed FreeBSD 13.0-STABLE on a Pinephone 1.2 for testing, and thought= that the dmesg output would be of interest to the list:<br> <br> ---<<BOOT>>---<br> WARNING: Cannot find freebsd,dts-version property, cannot check DTB complia= nce<br> Copyright (c) 1992-2021 The FreeBSD Project.<br> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br= > =C2=A0 =C2=A0 =C2=A0 =C2=A0 The Regents of the University of California. Al= l rights reserved.<br> FreeBSD is a registered trademark of The FreeBSD Foundation.<br> FreeBSD 13.0-STABLE #0 stable/13-n248759-3684bb89d52: Thu Dec 30 03:49:13 U= TC 2021<br> =C2=A0 =C2=A0 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/s= ys/GENERIC arm64<br> FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-= 13.0.0-0-gd7b669b3a303)<br> VT: init without driver.<br> module firmware already present!<br> real memory=C2=A0 =3D 3221004288 (3071 MB)<br> avail memory =3D 3118305280 (2973 MB)<br> Starting CPU 1 (1)<br> Starting CPU 2 (2)<br> Starting CPU 3 (3)<br> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs<br> random: unblocking device.<br> random: entropy device external interface<br> MAP f8f2b000 mode 2 pages 4<br> MAP f8f30000 mode 2 pages 4<br> MAP fdf60000 mode 2 pages 16<br> kbd0 at kbdmux0<br> ofwbus0: <Open Firmware Device Tree><br> clk_fixed0: <Fixed clock> on ofwbus0<br> clk_fixed1: <Fixed clock> on ofwbus0<br> simplebus0: <Flattened device tree simple bus> on ofwbus0<br> regfix0: <Fixed Regulator> on ofwbus0<br> regfix1: <Fixed Regulator> on ofwbus0<br> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0<br= > rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 58,59 on simplebus0= <br> rtc0: registered as a time-of-day clock, resolution 1.000000s<br> ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c2= 03ff on simplebus0<br> ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400= -0x1f014ff on simplebus0<br> gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c= 82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 53 on simplebus= 0<br> gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224<br> aw_r_intc_gicp0: <Allwinner R INTC> mem 0x1f00c00-0x1f00fff irq 60 on= simplebus0<br> gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq= 24,25,26 on simplebus0<br> gpiobus0: <OFW GPIO bus> on gpio0<br> iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2= afff irq 40 on simplebus0<br> iicbus0: <OFW I2C bus> on iichb0<br> iichb1: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b000-0x1c2= b3ff irq 41 on simplebus0<br> iicbus1: <OFW I2C bus> on iichb1<br> iichb2: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b400-0x1c2= b7ff irq 42 on simplebus0<br> iicbus2: <OFW I2C bus> on iichb2<br> gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq= 63 on simplebus0<br> gpiobus1: <OFW GPIO bus> on gpio1<br> generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0<br> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz qualit= y 1000<br> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality= 1000<br> a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 8,9 on simp= lebus0<br> Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000= <br> aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0<= br> rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1<br> rtc1: Error when reading reg 0x02, rv: 3<br> rtc1: Failed to configure RTC<br> device_attach: rtc1 attach returned 5<br> rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1<br> rtc1: Error when reading reg 0x02, rv: 3<br> rtc1: Failed to configure RTC<br> device_attach: rtc1 attach returned 5<br> aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on = simplebus0<br> rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1<br> rtc1: Error when reading reg 0x02, rv: 3<br> rtc1: Failed to configure RTC<br> device_attach: rtc1 attach returned 5<br> mmc_pwrseq0: <MMC Simple Power sequence> on ofwbus0<br> awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c= 1a803,0x1c1b800-0x1c1b803 on simplebus0<br> rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1<br> rtc1: Error when reading reg 0x02, rv: 3<br> rtc1: Failed to configure RTC<br> device_attach: rtc1 attach returned 5<br> iichb3: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 64 on simplebus0<= br> iicbus3: <OFW I2C bus> on iichb3<br> axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 ir= q 70 on iicbus3<br> axp8xx_pmu0: cannot allocate resources for device<br> device_attach: axp8xx_pmu0 attach returned 6<br> cpulist0: <Open Firmware CPU Group> on ofwbus0<br> cpu0: <Open Firmware CPU> on cpulist0<br> cpufreq_dt0: <Generic cpufreq driver> on cpu0<br> cpufreq_dt0: no regulator for cpu@0<br> device_attach: cpufreq_dt0 attach returned 6<br> cpu1: <Open Firmware CPU> on cpulist0<br> cpufreq_dt1: <Generic cpufreq driver> on cpu1<br> cpufreq_dt1: no regulator for cpu@1<br> device_attach: cpufreq_dt1 attach returned 6<br> cpu2: <Open Firmware CPU> on cpulist0<br> cpufreq_dt2: <Generic cpufreq driver> on cpu2<br> cpufreq_dt2: no regulator for cpu@2<br> device_attach: cpufreq_dt2 attach returned 6<br> cpu3: <Open Firmware CPU> on cpulist0<br> cpufreq_dt3: <Generic cpufreq driver> on cpu3<br> cpufreq_dt3: no regulator for cpu@3<br> device_attach: cpufreq_dt3 attach returned 6<br> pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0<br> a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 10 o= n simplebus0<br> aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0= ffff irq 14 on simplebus0<br> aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c1= 0fff irq 15 on simplebus0<br> aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c1= 1fff irq 16 on simplebus0<br> musbotg0: <Allwinner USB DRD> mem 0x1c19000-0x1c193ff irq 19 on simpl= ebus0<br> musbotg0: setting phy mode 3<br> usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM<br> usbus0 on musbotg0<br> ehci0: <Generic EHCI Controller> mem 0x1c1a000-0x1c1a0ff irq 20 on si= mplebus0<br> usbus1: EHCI version 1.0<br> usbus1 on ehci0<br> ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 21 on si= mplebus0<br> usbus2 on ohci0<br> ehci1: <Generic EHCI Controller> mem 0x1c1b000-0x1c1b0ff irq 22 on si= mplebus0<br> usbus3: EHCI version 1.0<br> usbus3 on ehci1<br> ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 23 on si= mplebus0<br> usbus4 on ohci1<br> gpioc0: <GPIO controller> on gpio0<br> aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c= 250ff irq 34 on simplebus0<br> uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 35 on simple= bus0uart0: console (115384,n,8,1)<br> uart1: <16750 or compatible> mem 0x1c28400-0x1c287ff irq 36 on simple= bus0<br> uart2: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 38 on simple= bus0<br> iicbus0: <unknown card> at addr 0xba<br> iic0: <I2C generic I/O> on iicbus0<br> iicbus1: <unknown card> at addr 0x3c<br> iicbus1: <unknown card> at addr 0x90<br> rtc1: <MAX77620 RTC> at addr 0xd0 irq 69 on iicbus1<br> rtc1: Error when reading reg 0x02, rv: 3<br> rtc1: Failed to configure RTC<br> device_attach: rtc1 attach returned 5<br> iic1: <I2C generic I/O> on iicbus1<br> iic2: <I2C generic I/O> on iicbus2<br> pwm0: <Allwinner PWM> mem 0x1f03800-0x1f03bff on simplebus0<br> pwmbus0: <OFW PWM bus> on pwm0<br> pwmc0: <PWM Control> channel 0 on pwmbus0<br> gpioc1: <GPIO controller> on gpio1<br> axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 ir= q 70 on iicbus3<br> axp8xx_pmu0: cannot allocate resources for device<br> device_attach: axp8xx_pmu0 attach returned 6<br> iic3: <I2C generic I/O> on iicbus3<br> aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 65 on = simplebus0<br> gpioled0: <GPIO LEDs> on ofwbus0<br> armv8crypto0: <AES-CBC,AES-XTS,AES-GCM><br> cpufreq_dt0: <Generic cpufreq driver> on cpu0<br> cpufreq_dt0: no regulator for cpu@0<br> device_attach: cpufreq_dt0 attach returned 6<br> cpufreq_dt1: <Generic cpufreq driver> on cpu1<br> cpufreq_dt1: no regulator for cpu@1<br> device_attach: cpufreq_dt1 attach returned 6<br> cpufreq_dt2: <Generic cpufreq driver> on cpu2<br> cpufreq_dt2: no regulator for cpu@2<br> device_attach: cpufreq_dt2 attach returned 6<br> cpufreq_dt3: <Generic cpufreq driver> on cpu3<br> cpufreq_dt3: no regulator for cpu@3<br> device_attach: cpufreq_dt3 attach returned 6<br> Timecounters tick every 1.000 msec<br> CPU=C2=A0 0: ARM Cortex-A53 r0p4 affinity:=C2=A0 0<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Cache = Type =3D <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ER= G,64 byte CWG><br> =C2=A0Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL><br= > =C2=A0Instruction Set Attributes 1 =3D <><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Processor Features 0 =3D <AdvSIMD,FP,E= L3 32,EL2 32,EL1 32,EL0 32><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Processor Features 1 =3D <><br> =C2=A0 =C2=A0 =C2=A0 Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,= BigEnd,16bit ASID,1TB PA><br> =C2=A0 =C2=A0 =C2=A0 Memory Model Features 1 =3D <8bit VMID><br> =C2=A0 =C2=A0 =C2=A0 Memory Model Features 2 =3D <32bit CCIDX,48bit VA&g= t;<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Debug Features 0 =3D <Do= ubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Debug Features 1 =3D <&g= t;<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Auxiliary Features 0 =3D <><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Auxiliary Features 1 =3D <><br> AArch32 Instruction Set Attributes 5 =3D <CRC32,SHA2,SHA1,AES+VMULL,SEVL= ><br> AArch32 Media and VFP Features 0 =3D <FPRound,FPSqrt,FPDivide,DP VFPv3+v= 4,SP VFPv3+v4,AdvSIMD><br> AArch32 Media and VFP Features 1 =3D <SIMDFMAC,FPHP DP Conv,SIMDHP SP Co= nv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ><br> CPU=C2=A0 1: ARM Cortex-A53 r0p4 affinity:=C2=A0 1<br> CPU=C2=A0 2: ARM Cortex-A53 r0p4 affinity:=C2=A0 2<br> CPU=C2=A0 3: ARM Cortex-A53 r0p4 affinity:=C2=A0 3<br> Release APs...done<br> usbus0: 480Mbps High Speed USB v2.0<br> usbus1: 480Mbps High Speed USB v2.0<br> usbus2: 12Mbps Full Speed USB v1.0<br> usbus3: 480Mbps High Speed USB v2.0<br> usbus4: 12Mbps Full Speed USB v1.0<br> Trying to mount root from ufs:/dev/ufs/rootfs [rw]...<br> ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0<br> Root mount waiting for:uhub0ugen2.1: <Generic OHCI root HUB> at usbus= 2<br> ugen1.1: <Generic EHCI root HUB> at usbus1<br> =C2=A0on usbus0<br> uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1&g= t; on usbus0<br> =C2=A0usbus0uhub1 on usbus2<br> =C2=A0usbus1uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, add= r 1> on usbus2<br> =C2=A0usbus2ugen3.1: <Generic EHCI root HUB> at usbus3<br> =C2=A0usbus3uhub2 usbus4 on usbus1<br> <br> uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u= sbus1<br> uhub3 on usbus3<br> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on u= sbus3<br> ugen4.1: <Generic OHCI root HUB> at usbus4<br> uhub4 on usbus4<br> uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on u= sbus4<br> uhub1: 1 port with 1 removable, self powered<br> uhub4: 1 port with 1 removable, self powered<br> uhub0: 1 port with 1 removable, self powered<br> mmc0: <MMC/SD bus> on aw_mmc2<br> mmc0: Failed to set VCCQ for card at relative address 2<br> mmcsd0: 31GB <MMCHC DA4032 0.1 SN FF342515 MFG 06/2020 by 69 0x0000> = at mmc0 52.0MHz/8bit/4096-block<br> mmcsd0boot0: 4MB partition 1 at mmcsd0<br> mmcsd0boot1: 4MB partition 2 at mmcsd0<br> mmcsd0rpmb: 17MB partition 3 at mmcsd0<br> mmc1: <MMC/SD bus> on aw_mmc1<br> mmc1: No compatible cards found on bus<br> aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004<br> <br> uhub2: 1 port with 1 removable, self powered<br> uhub3: 1 port with 1 removable, self powered<br> mountroot: waiting for device /dev/ufs/rootfs...<br> Dual Console: Serial Primary, Video Secondary<br> Setting hostuuid: 30633239-6439-6162-3062-303436373435.<br> Setting hostid: 0x09ffad61.<br> /etc/rc: WARNING: $zfskeys_enable is not set properly - see rc.conf(5).<br> Starting file system checks:<br> /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS<br> /dev/ufs/rootfs: clean, 6670786 free (26 frags, 833845 blocks, 0.0% fragmen= tation)<br> Mounting local filesystems:.<br> Setting hostname: generic.<br> ELF ldconfig path: /lib /usr/lib /usr/lib/compat<br> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NE= T_TUN,MOUSE,KEYBOARD,ATTACH,CACHED<br> Feeding entropy: .<br> Autoloading module: pwm_backlight<br> warning: KLD '/boot/kernel/backlight.ko' is newer than the linker.h= ints file<br> pwm_backlight0: <PWM Backlight> on ofwbus0<br> pwm_backlight0: No power-supply property<br> device_attach: pwm_backlight0 attach returned 6<br> lo0: link state changed to UP<br> Starting Network: lo0.<br> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384<b= r> =C2=A0 =C2=A0 =C2=A0 =C2=A0 options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXC= SUM_IPV6,TXCSUM_IPV6><br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet6 ::1 prefixlen 128<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 inet 127.0.0.1 netmask 0xff000000<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 groups: lo<br> =C2=A0 =C2=A0 =C2=A0 =C2=A0 nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL&g= t;<br> Starting devd.<br> add host <a href=3D"http://127.0.0.1" rel=3D"noreferrer" target=3D"_blank">= 127.0.0.1</a>: gateway lo0 fib 0: route already in table<br> add host ::1: gateway lo0 fib 0: route already in table<br> add net fe80::: gateway ::1<br> add net ff02::: gateway ::1<br> add net ::ffff:<a href=3D"http://0.0.0.0" rel=3D"noreferrer" target=3D"_bla= nk">0.0.0.0</a>: gateway ::1<br> add net ::<a href=3D"http://0.0.0.0" rel=3D"noreferrer" target=3D"_blank">0= .0.0.0</a>: gateway ::1<br> Updating /var/run/os-release done.<br> Creating and/or trimming log files.<br> Clearing /tmp (X related).<br> Updating motd:.<br> Starting syslogd.<br> Mounting late filesystems:.<br> Performing sanity check on sshd configuration.<br> Starting sshd.<br> Starting cron.<br> Starting background file system checks in 60 seconds.<br> <br> Fri Jan=C2=A0 1 00:04:48 UTC 2010<br> <br> FreeBSD/arm64 (generic) (ttyu0)<br> <br> login: root<br> Password:<br> Jan=C2=A0 1 00:04:50 generic login[835]: ROOT LOGIN (root) ON ttyu0<br> <br> </blockquote></div></div><div dir=3D"auto">Hi,</div><div dir=3D"auto"><br><= /div><div dir=3D"auto">Nice! Can you please share with us what components a= re working?</div><div dir=3D"auto"><br></div><div dir=3D"auto">For example,= wi-fi works?</div><div dir=3D"auto">Works the baseband router? Can you con= nect to cellular network?</div><div dir=3D"auto"><br></div><div dir=3D"auto= ">And, it would be amazing if you share with us the steps to make the insta= llation :)</div><div dir=3D"auto"><br></div><div dir=3D"auto">Bye!</div> --00000000000030f9b005d59a60b1--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFwocyOADL=_hXfVU0gQP_4ctAm4mRsxbis9f1_j-QGp_b2ySg>