Date: Mon, 25 Jan 1999 09:02:10 -0500 (EST) From: mwlucas@exceptionet.com To: freebsd-questions@FreeBSD.ORG Subject: wdc1 missing, NIC gone Message-ID: <199901251402.JAA07353@easeway.com>
next in thread | raw e-mail | index | archive | help
Hello,
I just upgraded my motherboard and CPU. Since then, I've lost use of
acd0 (the only device on wdc1), and my pn0.
wdc1 is not found on boot. pn0 is found, and configured, but I cannot
pass traffic through it.
I don't think it's a hardware problem; when I dig out my Win95 hard drive,
both of these devices work.
This is on a 3.0 system, supped a couple days before the 3.0/4.0 split,
originally installed off of the Feb 98 -current snapshot.
I've appended my boot dmesg for general consumption. Any ideas?
Also, what is "LDN" and where can I re-enable it?
Thanks,
==ml
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #1: Fri Jan 22 08:54:27 EST 1999
mwlucas@panic.exceptionet.com:/usr/src/sys/compile/VERMIN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 350797358 Hz
CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping=12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
real memory = 67108864 (65536K bytes)
config> quit
avail memory = 62820352 (61348K bytes)
Preloaded elf kernel "kernel" at 0xf0257000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
pn0: <82c168/82c169 PNIC 10/100BaseTX> rev 0x11 int a irq 12 on pci0.10.0
pn0: Ethernet address: 00:a0:cc:20:85:a1
pn0: autoneg complete, link status good (half-duplex, 10Mbps)
Probing for devices on PCI bus 1:
vga0: <Trident model 9850 VGA-compatible display device> rev 0xf3 int a irq 11
on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00f0 [0xf0008c0e] Serial 0xffffffff Comp ID: PNPb02f [0x2fb
0d041]
This is a Vibra16X, but LDN 0 is disabled
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio2 at 0x3e8-0x3ef irq 9 on isa
sio2: type 16550A
sio3 at 0x2e8-0x2ef irq 3 on isa
sio3: type 16550A
pcm0 not found at 0x40
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC22500L>
wd0: 2441MB (4999680 sectors), 4960 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
--
Michael Lucas |
Exceptionet, Inc. | www.exceptionet.com
"Exceptional Networking" |
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901251402.JAA07353>