Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 07 Feb 2005 15:31:19 -0800
From:      Samuel Clements <sclements@linkline.com>
To:        =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk>
Cc:        freebsd-current@freebsd.org
Subject:   Re: ATA mkIII first official patches - please test!
Message-ID:  <4207FA47.9060109@linkline.com>
In-Reply-To: <4207F07D.2020705@DeepCore.dk>
References:  <42028F29.1030801@DeepCore.dk> <6.2.1.2.0.20050207134251.055d5548@64.7.153.2> <20050207223124.GA5685@mebtel.net> <4207F07D.2020705@DeepCore.dk>

next in thread | previous in thread | raw e-mail | index | archive | help
Excellent work Søren! Below is the dmesg from an Intel SE7520AF2 with 
the onboard SATA controller in RAID mode (LSI v3 it seems) with the RAID 
detected, mounted and usable.

Congrats on a successful first run! I'll test more machines as I can get 
my hands on them.
   -Sam


Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #2: Tue Feb  8 08:11:43 UTC 2005
     admin@bubba.image:/usr/src/sys/i386/compile/BUBBA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Hyperthreading: 2 logical CPUs
real memory  = 1073610752 (1023 MB)
avail memory = 1041047552 (992 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  6
  cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci9: <ACPI PCI bus> on pcib2
pci7: <base peripheral, interrupt controller> at device 0.1 (no driver 
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pci8: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xc800-0xc83f mem 0xfe8a0000-0xfe8bffff irq 52 at device 4.0 on pci8
em0: Ethernet address: 00:07:e9:31:cc:fc
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xcc00-0xcc3f mem 0xfe8c0000-0xfe8dffff irq 53 at device 4.1 on pci8
em1: Ethernet address: 00:07:e9:31:cc:fd
em1:  Speed:N/A  Duplex:N/A
pci7: <base peripheral, interrupt controller> at device 0.3 (no driver 
attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci4: <ACPI PCI bus> on pcib7
pci2: <base peripheral, interrupt controller> at device 0.1 (no driver 
attached)
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib8
amr0: <LSILogic MegaRAID> mem 0xfbaf0000-0xfbafffff irq 100 at device 
1.0 on pci3
amr0: <LSILogic Intel(R) RAID Controller SRCS16> Firmware 713K, BIOS 
G401, 64MB RAM
pci2: <base peripheral, interrupt controller> at device 0.3 (no driver 
attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xd000-0xd01f 
irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd400-0xd41f 
irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd800-0xd81f 
irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 
0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 
irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xca800-0xcdfff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <SONY DVD-ROM DDU1613/9YS2> at ata0-master UDMA33
ad4: 238475MB <HDS722525VLSA80 V36OA63A> at ata2-master SATA150
ad6: 238475MB <HDS722525VLSA80 V36OA63A> at ata3-master SATA150
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 953840MB (1953464320 sectors) RAID 0 (optimal)
ATA PseudoRAID loaded
ar0: 238352MB <LSILogic v3 MegaRAID RAID1 array> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/amrd0s1a
em0: Link is up 100 Mbps Half Duplex




$ df -h
Filesystem       Size    Used   Avail Capacity  Mounted on
/dev/amrd0s1a    248M     55M    173M    24%    /
devfs            1.0K    1.0K      0B   100%    /dev
/dev/amrd0s1e    248M    6.0K    228M     0%    /tmp
/dev/amrd0s1f    900G    1.2G    826G     0%    /usr
/dev/amrd0s1d    248M     10M    218M     4%    /var
/dev/ar0s1d      225G    1.2G    206G     1%    /mnt







Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4207FA47.9060109>