Date: Sun, 28 Apr 2013 22:39:23 +0200 (CEST) From: "Jakob Alvermark" <jakob@alvermark.net> To: freebsd-arm@freebsd.org Subject: could not process 'interrupts' property Message-ID: <53141.85.229.95.25.1367181563.squirrel@alvermark.net>
next in thread | raw e-mail | index | archive | help
Hi! I got my hands on an Olinuxino A13 (https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/) It is based on the Allwinner A13, which is a stripped down A10 (no SATA, HDMI, only one USB host, fewer UARTs) Since we have (limited) A10 support in HEAD I thought I would give it a try. Starting from cubieboard I essentially just removed the second USB host and changed UART0 to UART1. When it boots I get the results below, "could not process 'interrupts' property". I can't figure out what's wrong, does anyone have a clue? Jakob U-Boot 2012.10-04259-g832a8e5 (Nov 08 2012 - 06:49:37) Allwinner Technology CPU: SUNXI Family Board: A13-OLinuXino I2C: ready DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 sun5i#fatload mmc 0 0x40200000 kernel.bin reading kernel.bin 3800740 bytes read sun5i#go 0x40200000 ## Starting application at 0x40200000 ... KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #13 r250014M: Sun Apr 28 16:06:38 CEST 2013 root@test10:/home/jakob/a13-gonzo/obj/arm.armv6/usr/src/sys/A13 arm FreeBSD clang version 3.3 (trunk 178860) 20130405 WARNING: WITNESS option enabled, expect reduced performance. CPU: Cortex A8-r3 rev 2 (Cortex-A core) Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext WB disabled EABT branch prediction enabled LoUU:2 LoC:2 LoUIS:1 Cache level 1: 32KB/64B 4-way data cache WT WB Read-Alloc 32KB/64B 4-way instruction cache Read-Alloc Cache level 2: 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc real memory = 536870912 (512 MB) avail memory = 511303680 (487 MB) random device not loaded; using insecure entropy simplebus0: <Flattened device tree simple bus> on fdtbus0 simplebus0: timer@01c20c00: could not process 'interrupts' property simplebus0: gpio@01c20800: could not process 'interrupts' property simplebus0: usb@01c14000: could not process 'interrupts' property simplebus0: serial@01c28400: could not process 'interrupts' property aintc0: <A13 AINTC Interrupt Controller> mem 0x1c20400-0x1c207ff on simplebus0 a13_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on simplebus0 a13wd0: <Allwinner A13 Watchdog> mem 0x1c20c90-0x1c20c97 on simplebus0 panic: No usable event timer found! KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x4c: ldrb r15, [r15, r15, ror r15]! db>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53141.85.229.95.25.1367181563.squirrel>