Date: Fri, 11 Feb 2000 00:53:05 -0500 From: "Kevin Cramer" <kcramer@siscom.net> To: freebsd-questions@freebsd.org Subject: Problem with ES1371 soundcard Message-ID: <20000211005305.A642@socrates.siscom.net>
next in thread | raw e-mail | index | archive | help
I'm having problems with an Ensoniq AudioPCI (ES1371) soundcard. I've
installed it into an Abit BP6 dual celeron machine and it is detected
correctly. However, whenever I try to access the soundcard the
machine locks up and I have to reboot.
I'm running 3.4-stable. I just cvsup'd and rebuilt the kernel not too
long ago.
I saw a message a while ago about the ES1371 not getting an IRQ under
SMP. Does this mean that it will not work under SMP? If not, can
anyone recommend any well-supported PCI sound cards that will?
Otherwise, I will have to put my old SB64 back in.
Thanks,
Kevin
Some extra info:
To enable sound support I'm just adding "device pcm0" to the kernel
config.
$ cat /dev/sndstat
FreeBSD Audio Driver (981002) Feb 7 2000 22:59:52
Installed devices:
pcm1: <ES1371Q AudioPCI> at 0xac00 irq 0 dma 0:0
dmesg:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 3.4-STABLE #3: Mon Feb 7 23:37:23 EST 2000
kevin@dual-celery.siscom.net:/usr/src/sys/compile/DUAL-CELERY-0.4
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127156224 (124176K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 19 on
pci0.7.2
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 19 on pci0.9.0
fxp0: Ethernet address 00:90:27:bd:6b:ee
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> rev 0x00 int a irq 17 on pci0.13.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
es1: <AudioPCI ES1371> rev 0x08 int a irq 19 on pci0.17.0
pcm1: using I/O space register mapping at 0xac00
es1371: codec vendor CRY revision 19
es1371: codec features Bass & Treble Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
Probing for devices on PCI bus 1:
vga0: <Matrox model 0525 graphics accelerator> rev 0x04 int a irq 18 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
bt0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
usb0: <Intel 82371AB/EB USB Host Controller>
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
IP Filter: initialized. Default = pass all, Logging = enabled
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318275LW 0001> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged
Queueing Enabled
da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged
Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000211005305.A642>