Date: Sun, 17 Jul 2005 11:11:28 +0200 From: Thierry Herbelot <thierry@herbelot.com> To: freebsd-current@freebsd.org Cc: "M. Warner Losh" <imp@bsdimp.com> Subject: Re: loss of PCMCIA ed(4) interface Message-ID: <200507171111.30149.thierry@herbelot.com> In-Reply-To: <20050716.184120.61267598.imp@bsdimp.com> References: <20050716.105849.112624020.imp@bsdimp.com> <20050716.112411.52164710.imp@bsdimp.com> <20050716.184120.61267598.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Le Sunday 17 July 2005 02:41, M. Warner Losh a écrit : > > OK. ed(4) is fine. Works great for me. However, there appears to be > some issues with the Ricoh RF5C47x class of bridge chips. I have an > old VAIO that exhibits similar problems to what you describe. I > believe it is the difference between how the TI automatically powers > up the card, and how the Ricoh requires an additional manual step that > we're not doing right now. I'll try to find that step as soon as my > system updates... Its a Pentium 300, so even an installworld takes a > while (esp when you forget to enable soft updates...). Hello, I have rebooted the machine with : hw.cbb.debug="1" in /boot/loader.conf (and also in /etc/sysctl.conf ?) full verbose boot message at : http://herbelot.tfh.free.fr/no_ed/dmesg.noed-cbb.verbose selected diffs from the "working" boot messages : 292a293,295 > cbb0: Found memory at 80000000 > cbb0: Secondary bus is 0 > cbb0: Secondary bus set to 2 subbus 3 316a320,322 > cbb1: Found memory at 80001000 > cbb1: Secondary bus is 0 > cbb1: Secondary bus set to 4 subbus 5 436a443,448 > Status is 0x30000006 > Status is 0x30000410 > cbb1: card inserted: event=0x00000000, state=30000410 > cbb_pcic_socket_enable: > cbb1: cbb_power: 5V As the card was not detected at boot-up, I have extracted, then replugged it : edited /var/log/messages at : http://herbelot.tfh.free.fr/no_ed/messages cbb1: Power not on? pccard1: Card has no functions! cbb1: PC Card card activation failed Status is 0x30000416 cbb_pcic_socket_disable Status is 0x30000410 cbb1: card inserted: event=0x00000006, state=30000410 cbb_pcic_socket_enable: cbb1: cbb_power: 5V Interrupt storm detected on "irq9: cbb0 cbb1+++"; throttling interrupt source pccard1: CIS version PCCARD 2.0 or 2.1 pccard1: CIS info: CNet, CN40BC Ethernet, D, NE2000 pccard1: Manufacturer code 0xffffffff, product 0xffffffff pccard1: function 0: network adapter, ccr addr 3f8 mask 3 pccard1: function 0, config table entry 32: I/O card; irq mask ffff; iomask 5, iospace 0-1f; mwait_required io8 io16 irqlevel cbb_pcic_socket_enable: ed1: <CNet CN40BC Ethernet> at port 0x100-0x11f irq 9 function 0 config 32 on pccard1 ed1: [GIANT-LOCKED] ed1: CIS MAC 00:00:00:00:00:00 ed1: ROM mac 00:80:ad:8e:82:60 ed1: bpf attached ed1: Ethernet address: 00:80:ad:8e:82:60 ed1: if_start running deferred for Giant ed1: type NE2000 (16 bit) Now, the card is working "normally" > > Warner TfH
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507171111.30149.thierry>