Date: Mon, 10 Mar 2014 15:49:22 -0400 From: Mike Tancsa <mike@sentex.net> To: Larry Baird <lab@gta.com>, Idwer Vollering <vidwer@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI issues with PC engines APU beta board Message-ID: <531E1742.2020906@sentex.net> In-Reply-To: <20140303154834.GA5864@gta.com> References: <CAPp9OrnmOYtAtqmC4wtHXu4fkWEnVeiDS4LAASO-n%2BPWZtHqag@mail.gmail.com> <20140303154834.GA5864@gta.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 3/3/2014 10:48 AM, Larry Baird wrote: >> This beta board runs coreboot, which is GPL'ed software. This means that it >> is possible to submit a contribution that lets you boot FreeBSD 9.2 and 10. >> >> Working with PC Engines to come up with a solution is the right way. >> >> FWIW, I can boot FreeBSD 9.2 just fine on amd64 hardware (ASUS F2A85-M) >> that also starts with coreboot. > FreeBSD has working on the issue from two directions. > > 1) John Baldwin <jhb@freebsd.org> has made software changes to FreeBSD > head that work around the issue (http://svnweb.freebsd.org/base?view=revision&sortby=date&revision=261243). This issue was to be MFCed a few weeks back. > I am sure that John will MFC it at some point. > > 2) I worked with Jung-uk Kim <jkim@freebsd.org> to develop BIOS patches to > give to PC Engines to provide back to SAGE. I received an updated BIOS > with this change the end of last week. Hi, I just got one of these boards to evaluate. I was trying to load the watchdog, but no luck. There seem to be a few other errors too amdsbwd0: ResetStatus0 = 0xf9 amdsbwd0: ResetStatus1 = 0x0b amdsbwd0: memory base address = 0xfec000f0 amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0xfec000f7 on isa0 amdsbwd0: bus_alloc_resource for ctrl failed device_attach: amdsbwd0 attach returned 6 USB seems to have some issues as well device_attach: pcib4 attach returned 6 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> at device 20.5 on pci0 ohci0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). ohci0: Could not map memory device_attach: ohci0 attach returned 6 pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> at device 22.0 on pci0 ohci0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). ohci0: Could not map memory device_attach: ohci0 attach returned 6 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> at device 22.2 on pci0 ehci0: 0x100 bytes of rid 0x10 res 3 failed (0, 0xffffffff). ehci0: Could not map memory device_attach: ehci0 attach returned 6 acpi_button0: <Power Button> on acpi0 pmtimer0 on isa0 not sure of the NIC errors are issues too ? re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff at device 0.0 on pci3 re2: 0x1000 bytes of rid 0x18 res 3 failed (0, 0xffffffff). re2: 0x4000 bytes of rid 0x20 res 3 failed (0, 0xffffffff). re2: could not allocate MSI-X PBA resource re2: Using 1 MSI message re2: ASPM disabled re2: Chip rev. 0x2c000000 re2: MAC rev. 0x00200000 miibus2: <MII bus> on re2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Ethernet address: 00:0d:b9:33:11:c6 Start bios (version ?-20131224_111227-ubuntubuilderx64) CPU Mhz=1000 10.0-STABLE FreeBSD 10.0-STABLE #2 r262153 i386 ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?531E1742.2020906>