From owner-freebsd-smp Fri Apr 14 6:23:12 2000 Delivered-To: freebsd-smp@freebsd.org Received: from thehousleys.net (frenchknot.ne.mediaone.net [24.147.224.201]) by hub.freebsd.org (Postfix) with ESMTP id 0420037B58D for ; Fri, 14 Apr 2000 06:23:08 -0700 (PDT) (envelope-from jim@thehousleys.net) Received: from thehousleys.net (baby.int.thehousleys.net [192.168.0.24]) by thehousleys.net (8.9.3/8.9.3) with ESMTP id JAA00797 for ; Fri, 14 Apr 2000 09:23:07 -0400 (EDT) Message-ID: <38F71BBB.9FCD3C8B@thehousleys.net> Date: Fri, 14 Apr 2000 09:23:07 -0400 From: James Housley Organization: The Housleys dot Net X-Mailer: Mozilla 4.72 [en] (X11; U; FreeBSD 3.4-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-smp@freebsd.org Subject: ASUS P2B-D & SMB Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-smp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have an Asus P2B-D for my server. I tried to enable the SMB in SMP mode but I get a panic on boot. I don't have a log yet. I added the following to my SMP kernel to cause the panic. controller smbus0 controller intpm0 device smb0 at smbus? controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? controller pcf0 at isa? port 0x320 net irq 5 In UP mode it boots fine and produces the following dmesg. Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-STABLE #0: Fri Apr 14 08:29:18 EDT 2000 root@cat.int.thehousleys.net:/usr/src/sys/compile/MYKERNELup Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183fbff real memory = 268435456 (262144K bytes) avail memory = 258486272 (252428K bytes) Preloaded elf kernel "kernel" at 0xc0281000. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x02 on pci0.4.0 ide_pci0: rev 0x01 on pci0.4.1 intpm0: rev 0x02 on pci0.4.3 intpm0: I/O mapped e800 ALLOCED IRQ 0 intr IRQ 9 enabled revision 0 intsmb0: smbus0: on intsmb0 smb0: on smbus0 intpm0: PM I/O mapped e400 vx0: <3COM 3C590 Etherlink III PCI> rev 0x00 int a irq 9 on pci0.9.0 utp[*utp*] address 00:60:97:08:9a:d7 ed1: rev 0x00 int a irq 12 on pci0.10.0 ed1: address 00:80:c8:de:1a:50, type NE2000 (16 bit) bt0: rev 0x08 int a irq 10 on pci0.11. 0 bt0: BT-948 FW Rev. 5.06I Ultra Narrow SCSI Host Adapter, SCSI ID 7, 192 CCBs vga0: rev 0x54 int a irq 11 on pci0.12.0 Probing for devices on PCI bus 1: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A ppc0 at 0x378 irq 7 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa wdc0: unit 0 (wd0): , DMA, 32-bit, multi-block-16 wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): , removable, accel, dma, iordis acd0: drive speed 1378KB/sec, 128KB cache acd0: supported read types: CD-R, CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa wdc1: unit 0 (wd2): , DMA, 32-bit, multi-block-16 wd2: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S pcf0 at 0x320 irq 5 on isa pcf0 not attached due to irq conflict with sio2 at 5 bt: unit number (1) too high bt1 not found at 0x330 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 flags 0x20 on isa apm: found APM BIOS version 1.2 pcf0: iicbus0: on pcf0 addr 0xaa iicsmb0: on iicbus0 smbus1: on iicsmb0 smb1: on smbus1 iic0: on iicbus0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 25 packets/entry by default sa0 at bt0 bus 0 target 3 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at bt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1006MB (2061108 512 byte sectors: 64H 32S/T 1006C) changing root device to wd0s1a In SMP it paniced at the "intsmb0: " line I think. What can I do to trouble shoot this. This functionality is not required by me, but if I can help with out bringing the server down for too long I will do what is needed. My first guesses are I probably need a serial console? and kernel debugging DDG? I din't find any open PRs in "i386" searching for SMB or SMP. All pointers welcome. Jim -- In God we Trust -- all others must submit an X.509 certificate. -- Charles Forsythe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message