Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 25 Jul 2013 13:54:52 +0700
From:      Olivier Nicole <olivier.nicole@cs.ait.ac.th>
To:        krad <kraduk@gmail.com>
Cc:        Olivier Nicole <on@cs.ait.ac.th>, freebsd-net@freebsd.org, "freebsd-questions@freebsd.org" <questions@freebsd.org>
Subject:   Re: Same MAC address in 2 different VLANs
Message-ID:  <CA%2Bg%2BBvgg0x7eTpGJba2E-Mt_-cXiv0FhepkOj%2BXmhk-5MGnUtA@mail.gmail.com>
In-Reply-To: <CALfReyfLNbPtdhVE0gGVyhM0sdJX_EGzfEYHPi3TYfF8FLc9iw@mail.gmail.com>
References:  <u9txjqdhix.fsf@banyan.cs.ait.ac.th> <CALfReyfLNbPtdhVE0gGVyhM0sdJX_EGzfEYHPi3TYfF8FLc9iw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
> I think you maybe ok. Ive just looked at my esx config and the esx
> management interfaces use their own generated macs, not the physical
> interfaces ones. All the vms obviously use generated macs as well.
>
> However I only looked over it at a superficial level.
>
> Have you considered using a tap or spare phyical interface on your flex box
> and not linking it to the network?

Thank you, that was a brilliant idea: Flex only needs that one
interface, with the specific MAC, exists on the host, it does not
specifically try to use that interface for managing licenses, so a tap
hanging to nowhere is the solution.

Best regards,

Olivier

>
>
> On 19 July 2013 10:29, Olivier Nicole <Olivier.Nicole@cs.ait.ac.th> wrote:
>
>> Hello,
>>
>> Could any one comment about the use of the same MAC address in 2
>> separate VLANs?
>>
>> All my machines are connected to 2 VLANs (one public and one private)
>> with no routing in between the VLANs.
>>
>> I used to run a FLEX license manager to a physical machine. When I
>> virtualized that service, I had to use the MAC address of that physical
>> machine for the virtual machine (FLEX is linked to the MAc address and I
>> coul dnot issue new license as licensed the pproduct is not supported
>> anymore). The virtual NIC that has the old MAC address is connected to
>> the public VLAN.
>>
>> Now I want to reuse the physical machine as a VMware server. Dell nor
>> VMware offer a solution to change the MAC address (like
>> ifconfig em0 link xx:xx:xx:xx:xx:xx would do). So I plan to connect the
>> NIC with the incriminated MAC to the private VLAN.
>>
>> Most (if not all) my servers are FreeBSD. Most will access the virtual
>> machine running FLEX and may access the VMware server also. The servers
>> are not VLAN aware.
>>
>> Will this be an issue?
>>
>> Best regars,
>>
>> Olivier
>>
>> --
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "
>> freebsd-questions-unsubscribe@freebsd.org"
>>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2Bg%2BBvgg0x7eTpGJba2E-Mt_-cXiv0FhepkOj%2BXmhk-5MGnUtA>