Date: Fri, 5 Nov 1999 00:53:48 +0100 (MET) From: Gerard Roudier <groudier@club-internet.fr> To: Chris Dillon <cdillon@wolves.k12.mo.us> Cc: scsi@FreeBSD.ORG Subject: Re: SYM-0.9.0 ok for 3.3 and -current (was SYM driver available for -stable) Message-ID: <Pine.LNX.3.95.991105004827.900A-100000@localhost> In-Reply-To: <Pine.BSF.4.20.9911032231280.46291-100000@mail.wolves.k12.mo.us>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 3 Nov 1999, Chris Dillon wrote: > sym0: <875> rev 0x03 int a irq 10 on pci0.18.0 > sym0: Tekram NVRAM, ID 7, Fast-20, parity checking [ ... ] > da0 at sym0 bus 0 target 0 lun 0 > da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device=20 > da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) > da1 at sym0 bus 0 target 1 lun 0 > da1: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device=20 > da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) Could you check that tagged commands and disconnections are enabled for your drives. The driver is reading this information from the NVRAM and report this information as USER SETTINGS to CAM, so you should ensure the user setup of the controller has these features enabled for your disks.=20 Once booted you can camcontrol to get the current settings for your disks.= =20 G=E9rard. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.95.991105004827.900A-100000>