From owner-freebsd-scsi Thu Nov 4 14:32:24 1999 Delivered-To: freebsd-scsi@freebsd.org Received: from front6m.grolier.fr (front6m.grolier.fr [195.36.216.56]) by hub.freebsd.org (Postfix) with ESMTP id 11E5815783 for ; Thu, 4 Nov 1999 14:31:57 -0800 (PST) (envelope-from groudier@club-internet.fr) Received: from localhost (ppp-159-22.villette.club-internet.fr [195.36.159.22]) by front6m.grolier.fr (8.9.3/No_Relay+No_Spam_MGC990224) with SMTP id XAA12978; Thu, 4 Nov 1999 23:30:33 +0100 (MET) Date: Fri, 5 Nov 1999 00:53:48 +0100 (MET) From: Gerard Roudier X-Sender: groudier@localhost To: Chris Dillon Cc: scsi@FreeBSD.ORG Subject: Re: SYM-0.9.0 ok for 3.3 and -current (was SYM driver available for -stable) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Wed, 3 Nov 1999, Chris Dillon wrote: > sym0: <875> rev 0x03 int a irq 10 on pci0.18.0 > sym0: Tekram NVRAM, ID 7, Fast-20, parity checking [ ... ] > da0 at sym0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device=20 > da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) > da1 at sym0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device=20 > da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) > da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) Could you check that tagged commands and disconnections are enabled for your drives. The driver is reading this information from the NVRAM and report this information as USER SETTINGS to CAM, so you should ensure the user setup of the controller has these features enabled for your disks.=20 Once booted you can camcontrol to get the current settings for your disks.= =20 G=E9rard. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message