From owner-freebsd-alpha Mon Dec 18 18:45:47 2000 From owner-freebsd-alpha@FreeBSD.ORG Mon Dec 18 18:45:41 2000 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mail.HSTSOFT.COM (unknown [216.1.59.67]) by hub.freebsd.org (Postfix) with ESMTP id B13DC37B400 for ; Mon, 18 Dec 2000 18:45:40 -0800 (PST) Received: from igor [208.61.28.245] by mail.HSTSOFT.COM (SMTPD32-6.00) id ABBE574A0134; Mon, 18 Dec 2000 21:45:18 -0500 From: "Sergio Jachtchenco" To: Subject: RE: IDE CMD 649 and AS200-233 Date: Mon, 18 Dec 2000 21:45:36 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <14910.48457.983867.653307@grasshopper.cs.duke.edu> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > -----Original Message----- > From: owner-freebsd-alpha@FreeBSD.ORG > [mailto:owner-freebsd-alpha@FreeBSD.ORG]On Behalf Of Andrew Gallatin > Sent: Monday, December 18, 2000 20:46 > To: jachs@hstsoft.com > Cc: freebsd-alpha@FreeBSD.ORG > Subject: Re: IDE CMD 649 and AS200-233 > > > > > > How do I do it? Do I have to set a kernel option or maybe a boot flag? > > Break into the bootloader during its countdown and say "boot -v" > Copyright (c) 1992-2000 The FreeBSD Project. This is the output of kernel.GENERIC. The board in quetion has vendor id:0x1095. ========================================================================= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Tue Nov 21 09:42:09 GMT 2000 jkh@rawhide.osd.bsdi.com:/usr/src/sys/compile/GENERIC AlphaStation 200/400 ("Avanti") AlphaStation 200 4/233, 233MHz 8192 byte page size, 1 processor. CPU: EV45 (21064A) major=6 minor=0 OSF PAL rev: 0x100000002012e real memory = 98615296 (96304K bytes) Physical memory chunk(s): 0x00782000 - 0x05ff5fff, 92749824 bytes (11322 pages) avail memory = 89743360 (87640K bytes) Preloaded elf kernel "kernel.GENERIC" at 0xfffffc0000766000. md0: Malloc disk Creating DISK md0 found-> vendor=0x1000, dev=0x0001, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 00010000, size 8 map[14]: type 1, range 32, base 82010000, size 8 found-> vendor=0x8086, dev=0x0484, revid=0x43 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1011, dev=0x0002, revid=0x24 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 00010100, size 7 map[14]: type 1, range 32, base 82010100, size 7 found-> vendor=0x1095, dev=0x0649, revid=0x01 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 found-> vendor=0x5333, dev=0x5631, revid=0x06 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 84000000, size 26 pci0: on pcib0 sym0: <810> port 0x10000-0x100ff mem 0x82010000-0x820100ff irq 11 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 274 msec, 32439 KHz sym0: Delay (GEN=11): 261 msec, 34054 KHz sym0: Delay (GEN=11): 261 msec, 34054 KHz sym0: interrupting at ISA irq 11 isab0: at device 7.0 on pci0 Bus Modes: Bus Park, Resource Lock, IDE controller: Secondary (170h-177h,376h,377h) Floppy controller: 370h,371h Floppy controller: 372h-377h Keyboard controller: 60h,62h,64h,66h RTC: 70h-77h Configuration RAM: 0C00h,0800h-08FFh Port 92: enabled isa0: on isab0 de0: port 0x10100-0x1017f mem 0x82010100-0x8201017f irq 5 at device 11 .0 on pci0 de0: interrupting at ISA irq 5 de0: DEC 21040 [10Mb/s] pass 2.4 de0: address 00:00:f8:23:5c:9a bpf: de0 attached atapci0: irq 9 at device 12.0 on pci0 atapci0: Busmastering DMA not supported ata-: ata2 exists, using next available unit number ata2: probe allocation failed ata3: probe allocation failed pci0: (vendor=0x5333, dev=0x5631) at 13.0 irq 10 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0003 atkbd: keyboard ID 0x83ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0043 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 c8 psm: status 90 03 c8 psm: status 90 03 c8 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: interrupting at ISA irq 12 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 233331980 Hz (firmware 233100233 Hz) sio0: irq maps: 0x60 0x70 0x60 0x60 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 ppc0: using normal I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: on ppbus0 lpt0: Polled portppi0: on ppbus0 ppc0: interrupting at ISA irq 7 isa_probe_children: probing PnP devices Timecounter "alpha" frequency 233331980 Hz bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached bpf: sl0 attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. de0: enabling 10baseT port (probe5:sym0:0:5:0): phase change 6-2 6@45e1e598 resid=5. Creating DISK da0 Creating DISK cd0 pass0 at sym0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number 154708342861 pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass1 at sym0 bus 0 target 5 lun 0 pass1: Removable CD-ROM SCSI-2 device pass1: Serial Number \^_ pass1: 3.300MB/s transfers (cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5. da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number 154708342861 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass1: 3.300MB/s transfers (cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5. da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number 154708342861 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4159MB (8519216 512 byte sectors: 255H 63S/T 530C) Mounting root from ufs:/dev/da0a (cd0:sym0:0:5:0): phase change 6-2 6@45e96998 resid=5. (cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:sym0:0:5:0): NOT READY asc:3a,0 (cd0:sym0:0:5:0): Medium not present cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: Serial Number \^_ cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da0: invalid primary partition table: no magic start_init: trying /sbin/init To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message