Date: Sat, 23 Sep 2023 12:16:14 -0700 From: bob prohaska <fbsd@www.zefox.net> To: Mark Millard <marklmi@yahoo.com> Cc: freebsd-arm@freebsd.org Subject: Re: Shutdown -r under -current hangs on RPi3 Message-ID: <ZQ85fhHaO3xrfYjK@www.zefox.net> In-Reply-To: <9D29DD48-1572-4C04-AD88-8436AC8DDDCC@yahoo.com> References: <ZQ8JswF1/LNR899s@www.zefox.net> <0AADDACB-ABA3-47FF-B3A7-05B313F5326C@yahoo.com> <9D29DD48-1572-4C04-AD88-8436AC8DDDCC@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Sep 23, 2023 at 11:34:41AM -0700, Mark Millard wrote: > On Sep 23, 2023, at 11:26, Mark Millard <marklmi@yahoo.com> wrote: > > > On Sep 23, 2023, at 08:52, bob prohaska <fbsd@www.zefox.net> wrote: > > > >> From time to time, but seemingly more often lately, a Pi3 > >> get stuck during shutdown -r. The machine is running -current > >> from a mechanical usb hard disk through a powered hub. No micro > >> SD card is used. Once up it's quite stable. > >> > >> The console reports > >> > >> login: Sep 23 08:20:37 pelorus shutdown[224]: reboot by bob: > >> Stopping sshd. > >> Waiting for PIDS: 1063. > >> Stopping cron. > >> Waiting for PIDS: 1073. > >> Stopping powerd. > >> Waiting for PIDS: 1002. > >> Stopping devd. > >> Waiting for PIDS: 752. > >> Writing entropy file: . > >> Writing early boot entropy file: . > >> . > >> Terminated > >> Sep 23 08:20:43 pelorus syslogd: exiting on signal 15 > >> Waiting (max 60 seconds) for system process `vnlru' to stop... done > >> > >> Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 4 0 0 0 done > >> All buffers synced. > >> Uptime: 23h31m45s > >> Khelp module "ertt" can't unload until its refcount drops from 1 to 0. > > > > I've gotten the above message on rare occasions over the years on > > the amd64 system (ThreadRipper 1950X). (But reboots and shutdowns > > are not frequent for this system normally.) > > > > There is a recent: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=271677 > > > > It is not just your context with the issue. > > > >> Resetting system ... > >> > >> At that point all activity ceases. The only clue I can recognize is that > >> the red power LED remains off, as if FreeBSD never relinquishes control > >> to the Pi firmware, which turns the LED back on at powerup. Power-cycling > >> results in a normal reboot. > > > > The system might produce more messages about the > shutdown activity if it has been booted via: > > boot -v > > This might narrow down the context some for someone > familiar with the messages --if oyu are lucky enough > to eventually get an example from a boot -v context. I'm confused here. Boot is normal, and it doesn't seem to even reach the boot stage during reboot. Can boot -v affect the _next_ boot? It isn't clear to me that the bug report is related. It seems to focus on the ertt message, while my problems wait until the system claims to be resetting and then gets stuck. Maybe the ertt error is related, but the association isn't consistent Unfortunately the hang does not seem easily reproducible. Several consecutive shutdown -r reboots were successful. The hangs seen so far have all followed OS build/install sessions. Thanks for writing! bob prohaska
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ZQ85fhHaO3xrfYjK>