Date: Thu, 4 Mar 2004 21:27:02 +0700 From: "Deni Kurniawan" <denisz@despammed.com> To: <freebsd-hackers@freebsd.org> Subject: FW: [despammed] Kernel panic on 5.2.1-RELEASE Message-ID: <200403041426.i24EQoka062934@cache2.telkomsel.co.id>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0045_01C4022F.6F590540
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Looks like I have to type it in anyway... Hope there's no typos here... :)
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0xc
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc04efa98
stack pointer = 0x10:0xe793cc94
frame pointer = 0x10:0xe793ccc8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 43 (irq29: bge1)
trap number = 12
panic: page fault
cpuid = 0;
boot() called on cpu#0
syncing disks, buffers remaining... 7154 7154 7154 7154 7153 7153 7153 7153
-----Original Message-----
From: owner-freebsd-hackers@freebsd.org
[mailto:owner-freebsd-hackers@freebsd.org] On Behalf Of Deni Kurniawan
Sent: Thursday, March 04, 2004 7:01 PM
To: freebsd-hackers@freebsd.org
Subject: [despammed] Kernel panic on 5.2.1-RELEASE
Hi,
can anyone advise me on what cause this kernel panic [attached as jpg
snapshot] panic screen captured from RAC
is it caused by bge1 as currently this interface being used for doing snort
testing (i.e, it was flooded by trunk traffic from our networks) or is there
any known bugs related to the hardware ?
the OS is 5.2.1-RELEASE-p1 on DELL 2650
dmesg as follow:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p1 #5: Wed Mar 3 14:46:01 WIT 2004
root@cvsx.telkomsel.co.id:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
ACPI APIC Table: <DELL PE2650 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 1.80GHz (1794.39-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 4026466304 (3839 MB)
avail memory = 3913216000 (3731 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic2: Changing APIC ID to 6
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard Pentium Pro MTRR support
enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE2650 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fc430
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 5
pci0: <unknown> at device 4.0 (no driver attached)
pci0: <unknown> at device 4.1 (no driver attached)
pci0: <unknown> at device 4.2 (no driver attached)
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pci5: <mass storage, SCSI> at device 6.0 (no driver attached)
pci5: <mass storage, SCSI> at device 6.1 (no driver attached)
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 30 at device 8.1 on
pci4
aac0: [MPSAFE]
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.7-1, Build 3170, S/N 7620d3
aac0: Supported
Options=75c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,NORECOND,SGMAP64>
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
0xfcf10000-0xfcf1ffff irq 28 at device 6.0 on pci3
bge0: Ethernet address: 00:06:5b:f0:df:25
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
0xfcf00000-0xfcf0ffff irq 29 at device 8.0 on pci3
bge1: Ethernet address: 00:06:5b:f0:df:26
miibus1: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
pcib4: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib5
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on
acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcbfff,0xc0000-0xc7fff
on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
aacd0: <RAID 5> on aac0
aacd0: 279994MB (573428736 sectors)
GEOM: create disk aacd0 dp=0xcaf9ac0c
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/aacd0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
bge0: gigabit link up
bge1: gigabit link up
Accounting enabled
cd9660: RockRidge Extension
cd9660: RockRidge Extension
thanks,
denisz
------=_NextPart_000_0045_01C4022F.6F590540
Content-Type: text/plain;
name="ATT00061.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="ATT00061.txt"
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org"
------=_NextPart_000_0045_01C4022F.6F590540--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200403041426.i24EQoka062934>