Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 31 Mar 1995 19:13:52 -0800
From:      Richard Chang <richardc@CSUA.Berkeley.EDU>
To:        FreeBSD-current@freefall.cdrom.com
Subject:   ppp
Message-ID:  <Pine.DYN.3.91.950331190717.22917B-100000@soda.CSUA.Berkeley.EDU>

next in thread | raw e-mail | index | archive | help
Hi,

	I need help getting ppp working under -current as it worked fine under
2.0-RELEASE.  Here is the setup I'm using...

bigbang# kermit
so I use kermit to dial and start the ppp on the ppp server on my providers
side and then hit ctrl-z to suspend kermit then I kill the kermit 
process...  Is there a kermit that would allow me to quit it without 
dropping DTR since I do have AT&D0 set on the modem.  

bigbang# ppp
 This calls /usr/sbin/pppd /dev/cua00 115200

Here is my /etc/ppp/options file:

bigbang# more /etc/ppp/options
crtscts         # enable hardware flow control
modem           # modem control line
noipdefault     # remote PPP server must supply your IP address.
                # if the remote host doesn't send your IP during IPCP
                # negotiation , remove this option
passive         # wait for LCP packets
domain bigbang.HIP.Berkeley.EDU      # put your domain name here

<remote_ip>
#<136.152.64.1>
#<136.152.76.173>:<136.152.64.1>    # put the IP of remote PPP host here
                # it will be used to route packets via PPP link
                # if you didn't specified the noipdefault option
                # change this line to <local_ip>:<remote_ip>

defaultroute    # put this if you want that PPP server will be your
                # default router

bigbang#

	What am I doing wrong?  Any help would be greatly appreciated.  Thanks.

--richardc





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.DYN.3.91.950331190717.22917B-100000>