From owner-freebsd-hackers Thu Aug 22 14:09:25 1996 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id OAA18026 for hackers-outgoing; Thu, 22 Aug 1996 14:09:25 -0700 (PDT) Received: from nevis.oss.uswest.net (nevis.oss.uswest.net [204.147.85.3]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id OAA18010 for ; Thu, 22 Aug 1996 14:09:14 -0700 (PDT) Received: (from greg@localhost) by nevis.oss.uswest.net (8.6.12/8.6.12) id QAA19373 for freebsd-hackers@freebsd.org; Thu, 22 Aug 1996 16:08:17 -0500 From: "Greg Rowe" Message-Id: <9608221608.ZM19371@nevis.oss.uswest.net> Date: Thu, 22 Aug 1996 16:08:17 -0500 X-Mailer: Z-Mail (3.2.1 10oct95) To: freebsd-hackers@freebsd.org Subject: SMC EtherPower 10/100 - 9332 Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Greetings, Has anyone seen any problems with these things detecting the Hub speed incorrectly on a reboot ? I've had a couple instances on different systems, and different hubs, where a reboot will cause the card to come up as 100baseT on a 10baseT hub(2.1 & 2.1.5). A power on and off will then correct the problem. Again, I've only seen the problem only a couple times, and I have a fair number of these cards. Is there any way to force the card via the OS to go to 10baseT ? Thanks -- Greg Rowe | U S West - Interact Services | INTERNET greg@uswest.net 111 Washington Ave. South | Fax: (612) 672-8537 Minneapolis, MN USA 55401 | Voice: (612) 672-8535 Never trust an operating system you don't have source for....