Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 4 Sep 2012 22:16:00 GMT
From:      Mark <mark.williams@ntlworld.com>
To:        freebsd-gnats-submit@FreeBSD.org
Subject:   amd64/171331: Npviewer is crap
Message-ID:  <201209042216.q84MG063096705@red.freebsd.org>
Resent-Message-ID: <201209042220.q84MK3Sv010952@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         171331
>Category:       amd64
>Synopsis:       Npviewer is crap
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Sep 04 22:20:03 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator:     Mark
>Release:        9.1
>Organization:
>Environment:
FreeBSD Newton 9.1-RC1 FreeBSD 9.1-RC1 #0: Thu Aug  9 09:41:50 PDT 2012     root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.1/sys/GENERIC  amd64

>Description:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0: Thu Aug  9 09:41:50 PDT 2012
    root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.1/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2310.56-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb1  Family = f  Model = 6b  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory  = 1073741824 (1024 MB)
avail memory = 857509888 (817 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP-CPC SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <HP-CPC SLIC-CPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37de0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: 81 vs 7f
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem 0xfd8ff000-0xfd8ff7ff irq 19 at device 9.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:19:21:ff:22:cc:9d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x332c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:19:22:cc:9d
fwe0: Ethernet address: 02:00:19:22:cc:9d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:19:21:ff:22:cc:9d @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfe024000-0xfe027fff at device 5.0 on pci0
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 20 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 00:19:21:3d:62:f3
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 23 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 23 at device 8.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 21 at device 13.0 on pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
hdacc0: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1200 (Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26,25,28 on hdaa0
pcm1: <Realtek ALC1200 (Front Analog Headphones)> at nid 27 on hdaa0
pcm2: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3250820AS 3.CHL> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata3 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-H653L 0514> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0:-1: Attached to scbus7
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Cuse4BSD v0.1.24 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 2271 (notification-daemon), uid 1001: exited on signal 6
linux: pid 6090 (npviewer.bin): syscall pipe2 not implemented

>How-To-Repeat:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0: Thu Aug  9 09:41:50 PDT 2012
    root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.1/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2310.56-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb1  Family = f  Model = 6b  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory  = 1073741824 (1024 MB)
avail memory = 857509888 (817 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP-CPC SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <HP-CPC SLIC-CPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37de0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: 81 vs 7f
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem 0xfd8ff000-0xfd8ff7ff irq 19 at device 9.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:19:21:ff:22:cc:9d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x332c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:19:22:cc:9d
fwe0: Ethernet address: 02:00:19:22:cc:9d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:19:21:ff:22:cc:9d @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfe024000-0xfe027fff at device 5.0 on pci0
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 20 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 00:19:21:3d:62:f3
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 23 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 23 at device 8.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 21 at device 13.0 on pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
hdacc0: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1200 (Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26,25,28 on hdaa0
pcm1: <Realtek ALC1200 (Front Analog Headphones)> at nid 27 on hdaa0
pcm2: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3250820AS 3.CHL> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata3 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-H653L 0514> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0:-1: Attached to scbus7
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Cuse4BSD v0.1.24 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 2271 (notification-daemon), uid 1001: exited on signal 6
linux: pid 6090 (npviewer.bin): syscall pipe2 not implemented

>Fix:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RC1 #0: Thu Aug  9 09:41:50 PDT 2012
    root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.1/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2310.56-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb1  Family = f  Model = 6b  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory  = 1073741824 (1024 MB)
avail memory = 857509888 (817 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP-CPC SLIC-CPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
cryptosoft0: <software crypto> on motherboard
acpi0: <HP-CPC SLIC-CPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37de0000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on acpi0
device_attach: hpet0 attach returned 12
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: 81 vs 7f
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xfe02f000-0xfe02ffff at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <VIA Fire II (VT6306)> port 0xbc00-0xbc7f mem 0xfd8ff000-0xfd8ff7ff irq 19 at device 9.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:19:21:ff:22:cc:9d
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x332c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:19:22:cc:9d
fwe0: Ethernet address: 02:00:19:22:cc:9d
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:19:21:ff:22:cc:9d @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
hdac0: <NVIDIA MCP61 HDA Controller> mem 0xfe024000-0xfe027fff at device 5.0 on pci0
atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfe02d000-0xfe02dfff irq 20 at device 7.0 on pci0
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: Ethernet address: 00:19:21:3d:62:f3
atapci1: <nVidia nForce MCP61 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfe02c000-0xfe02cfff irq 23 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP61 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xfe02b000-0xfe02bfff irq 23 at device 8.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 21 at device 13.0 on pci0
nvidia0: <GeForce 6150SE nForce 430> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
hdacc0: <Realtek ALC1200 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC1200 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC1200 (Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26,25,28 on hdaa0
pcm1: <Realtek ALC1200 (Front Analog Headphones)> at nid 27 on hdaa0
pcm2: <Realtek ALC1200 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <ST3250820AS 3.CHL> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata3 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-H653L 0514> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <Generic> at usbus1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:7:0:-1: Attached to scbus7
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 scbus7 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device 
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 scbus7 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device 
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 scbus7 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device 
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Cuse4BSD v0.1.24 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pid 2271 (notification-daemon), uid 1001: exited on signal 6
linux: pid 6090 (npviewer.bin): syscall pipe2 not implemented


>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201209042216.q84MG063096705>